Lennox V36D048S6-5P VRF 360 Cassette Indoor Unit

Submittal Data

Job Name: [Job Name Placeholder]

Purchaser: [Purchaser Placeholder]

Submitted to: [Submitted to Placeholder]

Unit designation: [Unit Designation Placeholder]

Location: [Location Placeholder]

Engineer: [Engineer Placeholder]

Reference: [Reference Placeholder]

Approval: [Approval Placeholder]

Construction: [Construction Placeholder]

Schedule #: [Schedule # Placeholder]

General Information

The system shall feature comfort humidity control. Utilizing an integral humidity sensor, the system optimizes the indoor unit coil temperature according to the dew point, maximizing energy savings while still providing space dehumidification and occupant comfort.
The indoor unit shall have an integral condensate pump with maximum 29" lift from bottom of the unit with check valve and float switch to disable unit in the event of condensate overflow.
The indoor unit fascia panel shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app.

Construction

Insulated, HIPS chassis and fascia panel certified to UL94 V0.
Includes a knock-out for outside air capability (booster fan connection).
All heat exchangers shall be mechanically boded aluminum fin to copper tube.

Refrigerant System

The system shall utilize low-GWP R-32 refrigerant.
Refrigerant flow shall be controlled by an electronic expansion valve at the indoor unit.
The indoor unit shall include an R32 alarm output plug for simple notification of R32 leak detection (VSTAT10P-1 accessory required).

Indoor Fan

Three fan speed settings and auto settings.
Washable filter as standard.
The indoor unit shall have LED indicator lights and an infrared receiver.
The indoor unit shall not have air louvers or blades allowing full airflow without restriction.
Air direction control shall be achieved by creating a low-pressure area near air outlet causing discharge air to change direction angle.
Fixed or auto-swing air direction shall be possible with local and central controller options (10° ~ 60° angle).
Independent air distribution control shall be possible with wireless or premium wired controller (three directions, 10° ~ 60° angle).

Controls

Control wiring shall be 2 X 16 AWG.
The unit shall be operated via a wireless or wired remote control with DDC-type signal (purchased separately).
Dual set temperature support when connected to supported controllers.
No additional interface modules/adapters are required when connecting to Samsung central control options.
Wired or wireless controllers must be purchased separately.

External Heat Control

External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat (VSTAT10P-1 accessory required).
External heat control configuration settings include outside ambient external heat lockout, outside ambient compressor lockout, and time delay options (VSTAT10P-1 accessory required).
Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating (VSTAT10P-1 accessory required).

Convenience

Emergency Temperature Output (ETO) function: when indoor unit is in error status or when room temperature exceeds a configurable temperature level, the system outputs a signal to an external source (e.g., backup system, building management system, alert device like status light, warning lamp, or buzzer).

Specifications

Specification	Details
Model	V36D048S6-5P
Indoor Unit Model Number	V36D048S6-5P
Performance - Cooling (Btu/h)	48,000
Performance - Heating (Btu/h)	54,000
Voltage	1/208-230/60
Operating Current (max.) - Cooling (A)	0.75
Operating Current (max.) - Heating (A)	0.75
Power - MCA (A)	1.13
Power - MOP (A)	15
Evaporator Fan - Type	BLDC (1) With Turbo Type Fan (1)
Evaporator Fan - Output (Watts)	97
Airflow - Cooling (CFM)	848/954/1,112
Airflow - Heating (CFM)	848/954/1,112
Refrigerant - Type	R-32
Refrigerant - A2L Leak Detection	Integral
Pipe Connections - Low side (In.)	3/8
Pipe Connections - High side (In.)	5/8
Condensate	1 1/4 in. OD, 1 in. ID
Dimensions - W X H X D (In.)	37 1/4 X 14 3/8 X 37 1/4
Dimensions - Weight (lbs.)	50.70
Sound Pressure Level - Low/Med./High (dB(A))	39/42/44
Safety - Certifications	UL 60335-2-40
Fascia Panel - Open Type (Round) - L X W X H (in.)	41 3/8 X 3 3/8
Fascia Panel - Open Type (Round) - Weight (lbs.)	8.85
Fascia Panel - Ceiling Type (Square) - L X W X H (in.)	39 3/8 X 39 3/8 X 2 5/8
Fascia Panel - Ceiling Type (Square) - Weight (lbs.)	6.62
Safety - Certifications	UL 60335-2-40

Accessories

Fascia Panel

Open Type (round, black) - V1V36D02CPBW
Open Type (round, white) - V1V36D02CPWW
Ceiling Type (square, black) - V1V36D01CPBW
Ceiling Type (square, white) - V1V36D01CPWW

Controllers & Modules

Advanced - VSTAT04P-1
Touchscreen - VSTAT02P-1
Thermostat adapter (for connection to standard 24VAC thermostats) - VSTAT09P-1
Wireless controller - VSTAT01P-1
External temperature sensor - VCTRL11P-1
External contact control interface module - VSTAT10P-1
Motion detect sensor (MDS, white, compatible with square panel only) - V1MDS03CS
CN83 Pigtail (for 12VDC VENT output) - JV DB39-01263A CN83 Pigtail

Dimensional Drawing - Ceiling Type Fascia Panel

Unit: Inches

This section provides dimensional drawings for the unit with a Ceiling Type Fascia Panel.

Diagram Description:

Top View: Shows the square panel dimensions and mounting points.
Side View: Illustrates the unit's depth and how it integrates with the ceiling.
Front View: Details the air outlet and inlet grilles, fascia panel, and connection points.
Back View: Shows the rear of the unit with connection points and mounting details.

Labeled Components:

No.	Description
1	Liquid pipe connection (1/4)
2	Gas pipe connection (1/2)
3	Drain pipe connection
4	Opening for power and communication wire conduit
5	Air outlet opening
6	Air inlet grille
7	Suction inlet for booster fan
8	Fascia panel
9	Drain hose
10	Fresh air intake
11	Display
12	Wireless signal receiver

Dimensional Drawing - Open Type Fascia Panel