Member Parts
| Part No. | Diagram | Name | Qty. |
|---|---|---|---|
| MP1 | [Line drawing of a single armchair with a slatted seat and back, and metal frame legs.] | Single Chair | 2PCS |
| MP2 | [Line drawing of a two-seater sofa (loveseat) with a slatted seat and back, and metal frame legs.] | Double Chair | 1PC |
| MP3 | [Line drawing of a rectangular coffee table with a metal frame and a slatted surface.] | Coffee Table | 1PC |
Customer Service
Thanks for choosing VINGLI Patio Conversation Set. If you are happy with your shopping experience, here we offer some suggestions for you to express your happy feelings.
- Tell your family or friends
- Share your experience by writing a review on Amazon
If there are missing parts or broken parts, or if you need further assistance, please contact customer service online via email: support@vingli.com
Notice:
- 50% Tighten before fixing all screws.
- Place the item on a flat ground to adjust and make sure it remains stable.
- Tighten up all screws with tools gradually.
- If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
- If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
Hardware & Part List
| NO. | PART LIST | QTY PCS | NO. | PART LIST | QTY PCS | NO. | PART LIST | QTY PCS |
|---|---|---|---|---|---|---|---|---|
| A | [Metal frame piece, e.g., side support] | 6 | H | [Bolt] | 1 | O | [Bolt (12x6.5x1.0)] | 52 |
| B | [Curved metal piece, e.g., seat support] | 2 | I | [Bolt] | 1 | P | [Washer] | 52 |
| C | [Curved metal piece, e.g., armrest support] | 2 | J | [Screw] | 4 | Q | [Nut] | 12 |
| D | [Metal piece, e.g., armrest] | 3 | K | [Glass tabletop] | 1 | R | [L-shaped Allen wrench] | 12 |
| E | [Metal piece, e.g., armrest] | 3 | L | Screw (M6 x 15) | 22 | S | [Screw] | 1 |
| F | [Metal frame piece, e.g., front/back support] | 1 | M | Screw (M6 x 25) | 12 | T | [T-shaped Allen wrench] | 1 |
| G | [Metal frame piece, e.g., base support] | 1 | N | Screw (M6 x 50) | 18 |
Note: Please confirm all the parts are ready when assemble. And Only tighten all bolts when you are satisfied with the alignment of all components.
Assembly Steps
Step 1 x2 (Single Chair Assembly)
Diagram 1: Attach side frames (A) to the back/seat frame (B) using bolts (O), washers (S), and nuts (Q), tightened with an Allen wrench (R). Repeat for the second chair.
Diagram 2: Attach armrests (C, D, E) to the assembled chair frame using screws (M), washers (P), and Allen wrench (T).
Diagram 3: Close-up view showing connection points for Step 1.
Step 2 (Double Chair Assembly & Armrest Attachment)
Diagram 1: Assemble the double chair frame by attaching the front/back frame piece (F) to side frames (A) using screws (L) and washers (P), tightened with Allen wrench (S).
Diagram 2: Attach armrests (D, E) to the double chair frame using bolts (H), washers (O, L), and nuts (P), tightened with Allen wrench (S).
Diagram 3: Attach armrests (C, E) to the single chairs using screws (M), washers (P), and Allen wrench (T).
Step 3 (Coffee Table Assembly)
Diagram 1: Assemble the coffee table base frame by connecting the parts using screws (J), washers (P), and tightened with Allen wrench (S).
Diagram 2: Carefully place the glass tabletop (K) onto the completed coffee table base.
Diagram 3: A final view of the assembled coffee table.
