INSTRUCTION MANUAL
MODULAR SOFA
Carton Contents Overview
The modular sofa is delivered in multiple cartons. Please identify the contents of each carton before assembly.
CARTON A: Single Seat + Ottoman Module
Contains components for one single seat module with an ottoman.
CARTON B: Single Seat + Armrest Module
Contains components for one single seat module with armrests.
CARTON C: Single Seat Module
Contains components for one single seat module.
Please open vacuum-sealed packages last! Please read the notices below carefully.
Extremely Important Notice Before Assembly
- Vacuum-sealed Cushions, once opened, will lead to ineligible return conditions. Returns shall be processed in original boxes.
- Please set up the frame first, ensuring it is stable and meets your color/size demands, especially for parts not involving compressed components.
- For any damages or structure issues, it is highly recommended to reach out with pictures provided.
- When reporting missed parts, please clarify the part number that complies with the manual to speed up communication.
- Do not secure screws to 100% tightness until all holes are aligned successfully. Misalignment will lead to failure in the sofa's stability.
Pre-Assembly Information
Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
NOTICE
- Please keep this manual and hand it over when you transfer the product.
- Please read the following instructions carefully and use the product accordingly.
- This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
- Please do not exceed the weight limitations of this item.
- Do not stand on or use any part of this item as a step ladder.
- Please check the completeness and eligible condition of all numbered parts before your assembly.
- Please assemble the item in a spacious room and do not place the unwrapped product directly on the ground to avoid damage.
- Do not use this item in a way inconsistent with the manufacturer's instructions, as this could void the product warranty.
- Periodically inspect screw tightness while the product is in use. If necessary, retighten to ensure structural integrity.
- To avoid potential dangers of suffocation, please keep all parts and packaging (films, plastic bags, and foam, etc.) away from children and pets.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- Do not expose the product to direct sunlight exposure or rain, and do not put it in a humid place. Failure to do so may accelerate distortion or discoloration.
Assembly Requirements
? TWO PERSON ASSEMBLY
⏱️ UP TO 45 MINUTES FOR ASSEMBLY
⚖️ WEIGHT LIMITATION: 380LBS/PER SEAT
IMPORTANT
- Do not tighten bolts/screws completely until all bolts/screws are lined up and inserted into holes.
- Do not overtighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. If using power tools, remember to set the tool to low torque to avoid damage.
COMPONENTS - CARTON A
Diagram showing the components of Carton A: A single seat sofa with an ottoman. The components are laid out separately: Seat Frame (A), Ottoman Frame (C), Backrest (D), Seat Cushion (G), Ottoman Cushion (H), Back Cushion (I), Legs (M), Gaskets (L), Washers (N), M8*60mm Bolts (O), M8*80mm Bolts (P), Butterfly Nuts (Q), and Allen Key (R).
| Part Letter | Part Name | Quantity |
|---|---|---|
| A | Seat frame | 1PC |
| C | Ottoman frame | 1PC |
| D | Backrest | 1PC |
| G | Seat cushion (Open Last) | 1PC |
| H | Ottoman cushion (Open Last) | 1PC |
| I | Back Cushion (Open Last) | 1PC |
| M | Leg | 4PCS |
| L | Gasket | 8PCS |
| N | Washer | 12PCS+1PC |
| O | M8*60mm Bolt | 4PCS+1PC |
| P | M8*80mm Bolt | 4PCS |
| Q | Butterfly Nut | 4PCS |
| R | Allen Key | 1PC |
Not all hardware is required for every sofa; some extra hardware may be included for potential future updates to your sofa layout. Just follow the steps and select the necessary hardware.
ASSEMBLY STEPS - CARTON A
Step 1: Attach Legs and Gaskets
Screw Legs (M) and Gaskets (L) into the Seat Frame (A) and Ottoman Frame (C).
Diagram shows four legs (M) with gaskets (L) being screwed into the bottom corners of the seat frame (A) and ottoman frame (C).
Step 2: Attach Backrest to Seat Frame
Insert the Backrest (D) into the seating frame (A). Align the holes first, then attach the Bolts (O) & Washers (N) to secure the connection between A and D.
Warm Reminder: The bottom of the metal backrest frame in a curved design is normal. To avoid misalignment between different backframes, adhere to installing either the upper or lower screws first for all of them. Misalignment can occur if the upper screws are secured looser than the lower ones or vice versa on either one of them.
Diagram shows the backrest (D) fitting into the back of the seat frame (A). Bolts (O) and washers (N) are shown being inserted through holes to connect them. Hardware quantities indicated: N x 4, O x 4.
Step 3: Prepare Vacuum-Sealed Cushions
Always open vacuum-sealed cushions last! If you have confirmed there are no issues with the structure's stability, damages, color discrepancy, cloth quality, size, or parts completeness, then you can proceed to have cushions expanded and placed.
Please be reminded that opened vacuum-sealed cushions will cause a failure on return. Be careful when using scissors ✂️ to cut down the compressed bags. It might take 2-7 days for cushions to fully expand. Please be patient.
Diagrams show cushions being cut from their packaging and then patted to expand evenly.
Step 4: Place Cushions on the Sofa
Place the Seat Cushion (G), Back Cushion (D), and Ottoman Cushion (A) onto the assembled sofa frame.
Diagram shows the cushions (I, D, G, A) being placed onto the sofa structure.
COMPONENTS - CARTON B
Diagram showing the components of Carton B: A single seat sofa with armrests. The components are laid out separately: Seat Frame (A), Backrest (D), Left Armrest (E), Right Armrest (F), Seat Cushion (G), Back Cushion (I), Left Armrest Pillow (J), Right Armrest Pillow (K), Legs (M), Gaskets (L), Washers (N), M8*60mm Bolts (O), M8*80mm Bolts (P), Butterfly Nuts (Q), and Allen Key (R).
| Part Letter | Part Name | Quantity |
|---|---|---|
| A | Seat frame | 1PC |
| D | Backrest | 1PC |
| E | Left armrest | 1PC |
| F | Right armrest | 1PC |
| G | Seat cushion (Open Last) | 1PC |
| I | Back Cushion (Open Last) | 1PC |
| J | Left armrest pillow (Open Last) | 1PC |
| K | Right armrest pillow (Open Last) | 1PC |
| M | Leg | 4PCS |
| L | Gasket | 8PCS |
| N | Washer | 20PCS+1PC |
| O | M8*60mm Bolt | 12PCS+1PC |
| P | M8*80mm Bolt | 4PCS |
| Q | Butterfly Nut | 4PCS |
| R | Allen Key | 1PC |
Not all hardware is required for every sofa; some extra hardware may be included for potential future updates to your sofa layout. Just follow the steps and select the necessary hardware.
ASSEMBLY STEPS - CARTON B
Step 1: Attach Legs and Gaskets to Armrests
Screw Legs (M) and Gaskets (L) into the Armrests (E and F).
Diagram shows legs (M) with gaskets (L) being attached to the bottom of the left armrest (E) and right armrest (F).
Step 2: Connect Armrests to Seat Frame
Connect the Left Armrest (E) and Right Armrest (F) to the Seat Frame (A) using Bolts (O) and Washers (N).
The bottom of the metal backrest frame in a curved design is normal.
Diagram shows armrests (E, F) being attached to the seat frame (A) using bolts (O) and washers (N). Hardware quantities indicated: N x 8, O x 8.
Step 3: Attach Backrest to Seat Frame
Insert the Backrest (D) into the seating frame (A). Align the holes first, then attach the Bolts (O) & Washers (N) to secure the connection between A and D.
Warm Reminder: The bottom of the metal backrest frame in a curved design is normal. To avoid misalignment between different backframes, adhere to installing either the upper or lower screws first for all of them. Misalignment can occur if the upper screws are secured looser than the lower ones or vice versa on either one of them.
Diagram shows the backrest (D) fitting into the back of the seat frame (A). Bolts (O) and washers (N) are shown being inserted through holes to connect them. Hardware quantities indicated: N x 4, O x 4.
Step 4: Prepare Vacuum-Sealed Cushions
Always open vacuum-sealed cushions last! If you have confirmed there are no issues with the structure's stability, damages, color discrepancy, cloth quality, size, or parts completeness, then you can proceed to have cushions expanded and placed.
Please be reminded that opened vacuum-sealed cushions will cause a failure on return. Be careful when using scissors ✂️ to cut down the compressed bags. It might take 2-7 days for cushions to fully expand. Please be patient.
Diagrams show cushions (G, I, J, K) being cut from their packaging and then patted to expand evenly.
Step 5: Attach Arm Pillows
Attach the arm pillows (J and K) into their designated positions on the armrests.
Diagram shows arm pillows (J, K) being placed onto the armrests of the sofa.
Step 6: Place Cushions on the Sofa
Place the Seat Cushion (G), Back Cushion (D), and Back Cushion (I) onto the assembled sofa frame.
Diagram shows the cushions (I, D, G) being placed onto the sofa structure.
COMPONENTS - CARTON C
Diagram showing the components of Carton C: A single seat module. The components are laid out separately: Seat Frame (A), Backrest (D), Seat Cushion (G), Back Cushion (I), Legs (M), Gaskets (L), Washers (N), M8*60mm Bolts (O), M8*80mm Bolts (P), Butterfly Nuts (Q), and Allen Key (R).
| Part Letter | Part Name | Quantity |
|---|---|---|
| A | Seat frame | 1PC |
| D | Backrest | 1PC |
| G | Seat cushion (Open Last) | 1PC |
| I | Back Cushion (Open Last) | 1PC |
| M | Leg | 4PCS |
| L | Gasket | 8PCS |
| N | Washer | 12PCS+1PC |
| O | M8*60mm Bolt | 4PCS+1PC |
| P | M8*80mm Bolt | 4PCS |
| Q | Butterfly Nut | 4PCS |
| R | Allen Key | 1PC |
Not all hardware is required for every sofa; some extra hardware may be included for potential future updates to your sofa layout. Just follow the steps and select the necessary hardware.
ASSEMBLY STEPS - CARTON C
Step 1: Attach Legs and Gaskets to Seat
Screw Legs (M) and Gaskets (L) into the Seat Frame (A).
Diagram shows four legs (M) with gaskets (L) being screwed into the bottom corners of the seat frame (A).
Step 2: Attach Backrest to Seat Frame
Insert the Backrest (D) into the seating frame (A). Align the holes first, then attach the Bolts (O) & Washers (N) to secure the connection between A and D.
Warm Reminder: The bottom of the metal backrest frame in a curved design is normal. To avoid misalignment between different backframes, adhere to installing either the upper or lower screws first for all of them. Misalignment can occur if the upper screws are secured looser than the lower ones or vice versa on either one of them.
Diagram shows the backrest (D) fitting into the back of the seat frame (A). Bolts (O) and washers (N) are shown being inserted through holes to connect them. Hardware quantities indicated: N x 4, O x 4.
Step 3: Prepare Vacuum-Sealed Cushions
Always open vacuum-sealed cushions last! If you have confirmed there are no issues with the structure's stability, damages, color discrepancy, cloth quality, size, or parts completeness, then you can proceed to have cushions expanded and placed.
Please be reminded that opened vacuum-sealed cushions will cause a failure on return. Be careful when using scissors ✂️ to cut down the compressed bags. It might take 2-7 days for cushions to fully expand. Please be patient.
Diagrams show cushions (G, I) being cut from their packaging and then patted to expand evenly.
Step 4: Place Cushions on the Sofa
Place the Seat Cushion (G) and Back Cushion (I) onto the assembled sofa frame.
Diagram shows the cushions (I, G) being placed onto the sofa structure.
FREE COMBINATION
This section details how to combine different modules to create various sofa configurations.
Combining Cartons B+C (Example: Two-Seater Sofa)
Follow these steps to combine modules:
- Do not open the vacuum-sealed packages; always set the frame first.
- Connect Armrests (E, F) to Seat Frame (A) using Bolts (O) and Washers (N).
- Secure the connection of two Seat Frames (A) using the longer Bolts (P), Washer (N), and Butterfly Nuts (Q). Align first, then secure tightly.
- If you have no problems with the size, sofa frame stability, or color discrepancy, then please go ahead with opening the vacuum cushions.
Diagram shows two seat frames (A) being joined, with armrests (E, F) attached to one. It also shows the hardware (N, P, Q) used for connecting the seat frames.
SOFA COMBINATION EXAMPLES
The modular design allows for various configurations:
- A&B: A single seat module with ottoman combined with a single seat module with armrests.
- B&C&C: A single seat module with armrests combined with two single seat modules.
- A&A&B: Two single seat modules with ottomans combined with a single seat module with armrests.
- A&A&B&C: Two single seat modules with ottomans combined with a single seat module with armrests and a single seat module.
Diagrams illustrate these different combinations.
