Product Overview
The VINGLI Podium is a versatile mobile desk or stand, featuring a top board, a shelf, a back panel, and two legs, all supported by wheels for easy mobility. It is designed for various uses, including as a presentation stand, a portable workstation, or a rolling cart.
Components List
Before beginning assembly, please ensure all components and hardware listed below are present.
Main Components
| NO | QTY | DESCRIPTION |
|---|---|---|
| 1 | 1PC | TOP BOARD |
| 2 | 1PC | CROSS BAR |
| 3 | 1PC | BACK PANEL |
| 4 | 1PC | SHELF |
| 5 | 1PC | LEFT LEG |
| 6 | 1PC | RIGHT LEG |
Hardware
| NO | PARTS | QTY | DESCRIPTION |
|---|---|---|---|
| A | 6PCS | SCREW | |
| B | 2PCS | SCREW | |
| C | 8PCS | SCREW | |
| D | 2PCS | WHEEL WITH LOCK | |
| E | 2PCS | WHEEL | |
| F | 1PC | WRENCH | |
| G | 1PC | ALLEN WRENCH | |
| H | 6PCS | WASHER |
Tools Needed (Not Included): Flat & Philips Screwdriver. Note: The use of a power screwdriver is not recommended.
Assembly Instructions
Follow these steps carefully to assemble your VINGLI Podium.
STEP 1: Attach Cross Bar to Top Board
Position the cross bar (component 2) onto the underside of the top board (component 1). Secure it using 2 pieces of screw B. Ensure the holes align before fastening.
Visual Description: An overhead view showing the rectangular top board (1) with the cross bar (2) placed underneath, aligned with two pre-drilled holes. Two screws B are shown inserted through these holes.
STEP 2: Connect Legs to Back Panel
Attach the left leg (component 5) and the right leg (component 6) to the back panel (component 3). Use 6 pieces of screw A and 6 pieces of washer H for this connection. Tighten them securely using the Allen wrench G.
Visual Description: An isometric view of the back panel (3) with the left leg (5) and right leg (6) being attached to its sides. Screws A and washers H are depicted securing these connections, with an Allen wrench G indicating the tightening action.
STEP 3: Attach Top Board and Shelf to Legs
Fix the assembled top board (component 1, with cross bar attached) and the shelf (component 4) to the legs. Use 8 pieces of screw C for these connections. Ensure the shelf is positioned correctly between the legs.
Visual Description: An isometric view of the partially assembled podium. The top board (1) is shown being attached to the top of the legs, and the shelf (4) is shown being attached to the middle section of the legs. Eight screws C are indicated for these attachments.
STEP 4: Install Wheels
Install 2 pieces of wheel with lock (component D) at the front base of the podium. Install 2 pieces of wheel (component E) at the back base. Tighten all wheels securely using the wrench F.
Visual Description: An isometric view of the fully assembled podium structure. Two wheels with lock (D) are shown attached to the front base, and two regular wheels (E) are attached to the back base. A wrench F is depicted tightening one of the wheels.
