Briloner MAL 769401x LED Lamp Installation and Safety Guide

Product Information

Model: MAL 769401x

Brand: Briloner Leuchten GmbH & Co. KG

Contact Hotline: +49 (0)291 / 952993-650

Revision: 01 04/2025

Mounting Instructions

Please read these instructions carefully before installation or commissioning. Keep this user manual for future reference.

The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.

1. Step 1: Attach the lamp body to the ceiling mounting bracket.
2. Step 2: Connect the electrical wires: L (Phase) to the live wire, and N (Neutral) to the neutral wire.
3. Step 3: Secure the lamp body to the mounting bracket.
4. Step 4: Mount the base of the fixture to the ceiling using appropriate screws.
5. Step 5: Connect the mains power supply to the fixture.
6. Step 6: Remote Control Functions:
   • ON/OFF: Switches the light on with the last used setting or off.
   • DIM+/-: Brightens or dims the light in stages or continuously.
   • CW/WW: Adjusts color temperature towards cool white or warm white in stages or continuously.
   • A-/A+: Cycles through functions 1) to 14) (different light programs/color plays).
   • A STOP: Stops or starts the running program.
   • RGB: Selects 3 preset color variants.
   • WW/NW/CW: Toggles color temperature in 3 stages between cold white and warm white.
   • Timer: Switches the light off after approximately 30 minutes. Confirmed by LED flashing 1x.

Remote Control Operation: Before initial operation, remove the protective strip from the battery compartment. Operation is only possible when there is no obstruction between the remote control and the light.

Memory Function: The lamp switches on with an external light switch after a minimum off period of approx. 5 seconds, retaining the last selected function or switch position.

Safety Instructions

Please read this information carefully before installing or using this product. Keep this user manual for further reference.

• The manufacturer does not accept responsibility for injuries or damage resulting from improper use of the light.
• Maintenance is limited to surfaces. For electrical safety, do not clean with water or other liquids; use a dry, lint-free cloth.
• Caution! Risk of electric shock. Check the entire light for damage before connecting to the mains. Never use if damaged. Disconnect mains cable from power supply before assembly/disassembly. Switch off circuit breakers or unscrew fuses. Ensure switches are in the "OFF" position.
• Caution! Before drilling mounting holes, ensure no gas, water, or electricity pipes will be drilled through or damaged.
• When mounting, ensure the attachment material is suitable for the subsurface and that it can carry the weight. Manufacturer is not liable for improper installation.
• The symbol of the crossed-out garbage can means the product must not be disposed of with household waste. Return it to an electrical/electronic recycling point. Proper disposal helps mitigate environmental and health effects.
• Remove existing batteries or accumulators not enclosed by the old device, and lamps that can be removed without destruction, and bring them to a separate collection.
• Batteries included: Type "CR2025" / Chemical composition: "Lithium". Ensure the battery is completely drained before disposal.
• Safety Class II S: Specially insulated, must not be connected to an earthed conductor. Terminals: L = Phase, N = Neutral conductor, G = Earthed conductor.
• Protective covers and end caps for mains voltage parts must always be mounted. Do not install on damp or conductive subsurface. Ensure cables are not damaged during installation.
• The light has protection class "IP20" and is intended solely for indoor use in private households.
• Do not look directly into the light source (illuminant, LED, etc.).
• The light source of this lamp is not replaceable; when it reaches its end of life, the entire luminaire must be replaced.
• This product contains a light source of energy efficiency class "D" (EU regulation 2019/2015). Reference setting: "6500K".
• LED colour deviation from different batches may occur. Light colour and luminous strength of LEDs can also change depending on lifespan.
• This article is not suitable for use with dimmable electric circuits. It can be controlled using the accompanying remote control.