Safety Instructions

General Safety Precautions

• Always follow the installation instructions provided with the product.
• Do not connect or use this product during thunderstorms to avoid electric shock.
• Be aware of potential acoustic shocks and excessive acoustic pressure during voice communication.
• The product must be installed indoors and its case must not be opened.
• Connect an Ethernet cable to the Ethernet port on the rear panel and to a computer's Ethernet port.
• Connect only to in-house equipment (SELV interface).
• Connect a telephony cable to the telephony port on the rear panel and to a phone's telephony port.
• Do not connect this product directly to the public cable distribution or cable television network.
• Keep plastic bags out of reach of children due to suffocation risk.
• The product is designed for vertical use.
• When mounting on a wall, use screws and dowels appropriate for the wall material. Recommended screw: 3.5 mm diameter, 30 mm length or more. Recommended dowel: 5 mm diameter, 30 mm length.

Climatic Conditions

• Designed for use in an office or room with a maximum ambient temperature of 40°C (104°F).
• Do not install where there is excessive sunshine, heat radiation, or build-up of heat (e.g., under other electrical equipment).
• Must not be exposed to moisture or condensation.
• Install in an environment classified as pollution degree 2 (pollution-free environment with dry, non-conducting pollution).

Water and Moisture

• Do not install in damp or dusty environments.
• Do not allow the product to come into contact with water or liquids. No liquid should enter the product.
• Do not use near water outlets (bath, washbasin, washing machine) or in damp basements or near swimming pools.
• If liquid enters the product, switch it off immediately or unplug the power cord from the mains socket to prevent electrical discharge or fire.
• Allow the product to dry before switching it on if moved from a cold to a warm environment to prevent condensation.

Cleaning and Maintenance

• Disconnect the product from the wall socket and computer before cleaning.
• Do not use detergents, aerosols, chemicals, alcohol, benzene, diluents, or other flammable products, as they can cause fire.
• Do not dismantle the product. There are no user-replaceable parts. Opening covers may expose you to dangerous voltages. Incorrect re-assembly can cause electric shock. Contact customer service for repairs.

Power Supply

• Use only the supplied power unit and accessories.
• Connect to the mains according to the installation instructions and the identification label on the power unit.
• Using unrecommended power sources may cause overheating, deformation, electric discharge, or fire.
• The coaxial cable shield should be connected to the building's power supply earth.

Accessibility & Electrical Overload

• Ensure the power unit is easily accessible and close to the equipment for quick unplugging.
• Do not overload mains sockets or extensions to prevent fire or electric shock.

Damage Requiring Repair

• Unplug the product and have it repaired by qualified after-sales service if:
• The power supply or plug is damaged.
• A supplied cable is damaged or frayed.
• Liquid has spilled into the product, or it has been exposed to rain or water.
• The product does not function normally or its performance varies considerably.
• The product has fallen or is damaged.
• There is any sign of overheating.
• If small metal objects enter the product, disconnect immediately (risk of electric shock) and contact Customer Service. Do not reconnect until foreign bodies are removed.
• Unplug immediately if you notice a burning smell or smoke. Do not open the product yourself due to electric shock risk.

Regulatory Information

• This equipment is designed for private use inside a building. Ethernet and telephony ports are for indoor cable circuits within the building.
• Wireless device usage may be prohibited in certain environments (e.g., airports). Ask for permission before use if in doubt.
• Sagemcom Broadband SAS is not responsible for non-compliance with regulations or radio interference caused to third parties due to non-compliance.
• UK Declaration: Sagemcom confirms compliance with the Product Security and Telecommunications infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. Full text available at https://support.sagemcom.com/en.
• EU Declaration: Sagemcom confirms this product complies with directive CE 2014/53/EU.
• UK Radio Equipment Regulations: Sagemcom confirms compliance with Radio Equipment Regulations 2017.
• RF Exposure: This device produces radio frequencies within the 2.4 GHz and 5 GHz range. Keep the device at least 20 cm from people to limit exposure.
• Restrictions: Certain restrictions apply to this radio equipment in various European countries and the UK, particularly for the 5150-5350 MHz frequency band, which is limited to indoor use.

Accessories Information

• Your equipment may include a power supply (AC adapter and power cord) and the device itself.
• Use only the accessories provided with the device.

Environment

• This symbol indicates that the product must be collected separately and not disposed of with household waste.
• Follow local collection and recycling schemes. Retail outlets will take back end-of-life equipment when purchasing equivalent new equipment.
• Recycle packaging waste according to sorting rules.
• This product is designed with recyclable materials. Electrical and electronic products may contain hazardous components if not handled or disposed of properly.
• Do not dispose of the product with household waste.
• Professional users should refer to supplier instructions. Rented or deposited products require contacting the service provider.

Energy-Related Products Testing

• Off mode power consumption: 0.07 W
• Network Stand-by power consumption (all ports connected, wireless active): 11.7 W
• Network Stand-by power consumption (after 10 min inactivity): 7.8 W
• Wireless interfaces (Wi-Fi) can be disabled via the graphical user interface.

Ecodesign Requirements for External Power Supplies

Information regarding ecodesign requirements for external power supplies is provided in accordance with Commission Regulation (EU) 2019/1782.

Imported in UK by Sagemcom Broadband UK, The Broadgate Tower Third Floor, 20 Primrose Street, London, EC2A 2RS.