Sagemcom Fiber Box X6 Safety Instructions

General Safety Precautions

To avoid any risk of fire, electric shock or injury, the product should be used in compliance with basic safety precautions, including:

• Always follow the installation instructions provided in the documentation.
• Do not connect or use this product during thunderstorms. Interference from the mains and/or telephone network can cause electric discharges and electric shock.
• If the product is used for voice communication, acoustic shocks may occur, and excessive acoustic pressure can cause deafness.
• The product must be installed inside a building and its case must not be opened.
• Plastic bags present a risk of suffocation. Keep out of reach of children.
• The product is designed for horizontal position or to be hung on a wall at a height of less than 2m.
• Ensure metallic objects cannot be inserted through connectors.
• The disc behind the product must always be attached to prevent insertion of metallic objects through the holes.

Climatic Conditions

This product is designed for use in an office or home environment with a maximum ambient temperature of 45°C (113°F) and maximum altitude of xxxx m. It must not be installed in areas with excessive sunshine and/or heat radiation, or where heat builds up (e.g., on or under other electrical equipment). It must not be exposed to moisture or condensation. Install in a pollution degree 2 environment (pollution-free or with dry, non-conducting pollution).

Water and Moisture

Do not install the product in a damp or dusty environment. Avoid contact with water or other liquids. Ensure no liquid enters the product. Do not use near water outlets (bath, washbasin, washing machine), in damp basements, or near swimming pools. If liquid enters the appliance, switch it off immediately or unplug the power cord. Continued use may cause electric discharge or fire. Moving the appliance from a cold to a warm environment may cause condensation; allow it to dry before switching it back on.

Cleaning and Maintenance

Disconnect the appliance electrically from the wall socket and computer before cleaning. Do not use detergents, aerosols, chemicals that can damage plastic materials, or substances containing alcohol, benzene, or diluents. Use of these products may cause fire. To reduce the risk of electric shock, do not dismantle the product. Internal parts are not user-replaceable. Opening covers may expose you to dangerous voltages. Incorrect re-assembly can cause electric shock. Contact Customer Service for repairs or servicing.

Power Supply

Only use the supplied power unit and accessories. Connect to the mains according to installation instructions and the identification label on the power unit. Using non-recommended power sources may cause overheating, deformation, electric discharge, or fire. The coaxial cable shield should be connected to the building's power supply earth.

Accessibility & Electrical Overload

Ensure the power unit is easily accessible and close to the equipment for quick unplugging in case of a problem. Do not plug too many devices into a mains socket block or extensions to avoid increasing the risk of fire or electric shock.

Damage Requiring Repair

Unplug the appliance and have it repaired by qualified after-sales service if:

• The power supply or its plug are damaged.
• A supplied cable is damaged or frayed.
• Liquid has spilled into the appliance, or it has been exposed to rain or water.
• The appliance does not function normally or its performance varies considerably.
• The appliance has fallen or is damaged in any way.
• There is any sign of overheating.

If small metal objects accidentally get inside, disconnect the equipment from the mains immediately (risk of electric shock) and contact Customer Service. Do not reconnect until foreign bodies are removed. Unplug immediately if you notice a burning smell or smoke. Do not open the appliance yourself due to the risk of electric shock.

Product Usage and Compliance

This equipment is designed for private use inside a building. Ethernet ports (PORT1-PORT4), WAN PORT5, FXS TLF1 and TLF2, and XGSPON are intended for indoor cable circuits within the building where the product is installed and do not terminate on remote equipment earthed to a different earthing network.

Wireless device usage may be prohibited in certain environments or circumstances by the building owner or organization. Seek permission before switching on the appliance if unsure about wireless device policies in specific organizations (e.g., airports). Sagemcom Broadband SAS declines responsibility for non-compliance with regulations or radio interference caused to third parties due to non-respect of national regulations.

CE Marking: Sagemcom confirms this product complies with the fundamental requirements and other relevant provisions of directive 2014/53/EU. This marking certifies compliance with health and safety of users, electromagnetic compatibility, and correct use of radio frequency spectrum, and reduction of environmental impact.

The device operates within the 2.4GHz and 5GHz frequency ranges. To limit radio frequency exposure, it is recommended to keep the device at least 20cm from people.

Frequency bands and maximum radio-frequency powers transmitted:

• 2400-2483.5 MHz: 20dBm
• 5150-5350 MHz: 23dBm
• 5470-5600 MHz: 30dBm
• 5650-5725 MHz: 30dBm

This product is designed for use within Switzerland and other European countries with specific restrictions. The 5 GHz band (5150-5350 MHz) is limited to indoor use.

Accessories Information

Your electrical equipment may include, depending on the model purchased:

1. A power supply (AC adapter and power cord).
2. The device itself.

Refer to the EU declaration of conformity for the latest accessory information. The declaration can be consulted at https://support.sagemcom.com or requested from SAGEMCOM BROADBAND SAS, 4 ALLEE DES MESSAGERIES, 92271 BOIS-COLOMBES CEDEX - FRANCE. Contact: reclamations@sagemcom.com.

Environmental Disposal

This symbol indicates that when the appliance is to be disposed of, it must be collected separately and not with household waste. The EU has introduced a specific collection and recycling scheme for which manufacturers are responsible. Collection points are available locally (recycling centers, sorted waste collection). Retail outlets will take back end-of-life equipment free of charge when purchasing equivalent equipment. Follow sorting rules for packaging waste to facilitate recycling.

This appliance is designed and manufactured using high-quality, recyclable materials. Electrical and electronic appliances may contain essential but potentially hazardous items for health and the environment if not handled or disposed of properly. Do not dispose of with household waste. Professional users should refer to supplier instructions. If the appliance is rented or deposited, contact your service provider. Help protect the environment!

Information Relative to Energy-Related Products Testing

Off mode power consumption: 0.32W

Network Stand-by power consumption (all network ports connected and wireless ports activated): 9.75W

Network Stand-by power consumption (after 20 mins inactivity): 7.15W

Wireless interfaces (Wi-Fi) can be disabled by pressing the WIFI button on the front panel. Pressing the same button again activates WIFI.

COMMISSION REGULATION (EU) 2019/1782: This regulation lays down eco-design requirements for external power supplies.

Identification information is located on the power supply unit and on the bottom or side of the power supply.