Tow-Trust Towbars
Important: Please read General Notes overleaf before fitting
Issue 1
TVW13 MAN TGE / VOLKSWAGEN CRAFTER VAN SRW 2017> (With Step)
Parts List
| Item | Qty | Description | Item | Qty | Description |
|---|---|---|---|---|---|
| A | 1 | TVW13 Crossmember | D | 2 | M16 x 50 Bolts & Nyloc Nuts |
| B | 2 | Handed Side Arms | E | 8 | M12 x 150 Bolts & Nyloc Nuts |
| C | 2 | Spacer Plates | F | 4 | M14 x 40 Bolts & Nyloc Nuts |
| G | 16 | 12 x 25 Flat Washers | |||
| H | 8 | 14 x 27 Flat Washers |
Installation Instructions
- N/S ONLY: Remove the four fixings securing the vehicle step to the chassis. (Discard fixings) Drill out the four M12 Weld nuts to 12.5mm as per FIG.1.
- Insert Item E and Item G through each Towbar mounting point from the outside face, slide Item C over the weld nuts and loosely fix Item B in place.
- Repeat the above process for the O/S Chassis.
- Using Item F and Item H fix Item A between each side arm.
- Using Item D fix your desired ball bracket and wiring plate (Not supplied in this kit) to Item A.
- Fully tighten all fixings ensuring the Towbar is rigid, square, and secure.
Diagram Description
The main diagram illustrates the assembly of the TVW13 towbar system. It shows the central crossmember (Item A) connecting to the two handed side arms (Item B). Spacer plates (Item C) are positioned between the side arms and the vehicle chassis mounting points. Various bolts (Items D, E, F) and flat washers (Items G, H) are depicted as fasteners securing these components. The diagram also indicates quantities of fasteners required for specific connections, such as '4 x E' and '4 x G' for attaching the side arms to the chassis. A separate diagram, labeled FIG.1, provides a close-up view of a vehicle chassis mounting point, highlighting a 12.5mm diameter hole, indicating the required drilling size. Another small diagram shows the overall width of the towbar assembly (904) and the towbar type (TVW13 SRW).
Notes
1. Torque Settings: Refer to notes overleaf.
2. Load Limits: Nose load limits and vehicle manufacturers' trailer/caravan weight limits must be observed.
