Parts List
| Item | Qty | Description |
|---|---|---|
| A | 1 | TLAN4 Crossmember |
| B | 2 | Handed Side Arms |
| C | 1 | Extension |
| D | 2 | M16 x 50 Bolts & Nyloc Nuts |
| E | 10 | M10 x 40 (10.9) Bolts, 2 Nuts & 10 S/P Washers |
| F | 4 | M12 x 40 Thread Rolling Bolts (80 Nm) |
| G | 8 | M12 x 40 (10.9) Bolts, 6 Nyloc Nuts & 2 S/P Washers |
| H | 4 | M12 x 45 (12.9) Bolts & Nyloc Nuts (145Nm) |
| J | 12 | 10 x 30 Flat Washers |
| K | 18 | 12 x 25 Flat Washers |
| L | 1 | Socket Plate 1 |
Bumper Removal
- Remove the central bumper cover.
- Remove the trim below each rear light cluster, this will reveal two fixings, one either side of the boot opening and one by each wheel arch.
- Open the upper and lower tailgate, lift the carpet flap on the lower tailgate and remove three fixings.
- Remove two fixings from around each wheel arch.
- Remove seven fixings from the lower edge.
- Remove six fixings securing the undertray.
- Carefully remove the rear bumper and undertray from the vehicle.
- Remove the rear impact beam from the rear panel. (This is not refitted with the Towbar assembly)
Towbar Installation
- Using Item E with Item J fix Item A to the rear panel ensuring any ancillaries are refitted sandwiching the Towbar.
- Using Item G with Item K fix Items B to Item A.
- Using Item G with Item K fix Items B to the two mounting points on the vehicle.
- Using Item F fix Items B to the vertical forward most mounting points. NOTE: These are untapped holes and the bolts supplied are thread rolling bolts designed to cut their own thread. (80Nm)
- Using Item H with Item K fix Item C and Item L to Item A.
- Using Item D fix your desired ball bracket (not supplied in this kit) to Item C.
- Fully tighten all fixings ensuring the Towbar is rigid square and secure.
- Refit the rear bumper and undertray.
- Choose one of the below options for the Towbar bumper cover.
Bumper Cover Options
Option 1: Order From Dealership
Part Numbers: LR037931, LR037913
Option 2: Cut Original Bumper Cover
Description: Cut Pre Marked Area
Notes
1. Recommended Torque Setting for M12 Grade 10.9 - 130 Nm. (For other Torque Settings see notes overleaf.)
2. Nose load limits and vehicle manufacturers trailer / caravan weight limits must be observed.
Diagram Descriptions
Overall Assembly and Options
The first page displays a diagram illustrating the Tow-Trust TLAN4 towbar components, labeled A through L, and presents two distinct options for the rear bumper cover post-installation. Option 1 suggests ordering a specific replacement bumper cover from a dealership, identified by part numbers LR037931 and LR037913. Option 2 details modifying the original bumper cover by cutting along a pre-marked area.
Detailed Exploded Views
The second page provides two detailed isometric exploded views of the towbar assembly. The upper diagram illustrates the primary crossmember (A) and the handed side arms (B) being connected to the vehicle's chassis, showing the placement of various fasteners including bolts (E, F, G, H) and washers (J, K). It also depicts the attachment of the extension piece (C) and socket plate (L) to the crossmember (A) using bolts (H, K) and a bracket (D). The lower diagram focuses on the connection of the side arms (B) to the crossmember (A) and the vehicle frame, highlighting the use of bolts (G) and washers (K) at mounting points.
