boAt Airdopes Crude User Manual

Introduction

Get ready to immerse yourself in musical bliss with your boAt Airdopes Crude. This manual serves as your guide to understanding Bluetooth connectivity and device operation for an unparalleled auditory experience.

Package Contains

• 1x Pair of True Wireless Stereo (TWS) Earbuds
• 1x Charging Case
• 1x USB Type-C Charging Cable
• 1x User Manual
• 1x Warranty Card
• 1x Catalogue
• 1x FAQ Card
• 2x Additional Earmuffs

Charging the Case

Process: Connect one end of the USB Type-C charging cable to the case and the other end to a USB port or adapter. Flashing white LEDs indicate charging; solid white LEDs indicate a full charge.

Low Battery Indication: The white LED blinks three times when the case lid is opened or closed, signifying low case battery.

Earbud Charging Indication: When earbuds are placed in the case and the lid is closed, LED1 lights up for the left bud, LED3 for the right bud. Both LEDs light up for 5 seconds if both are charging.

Charging the Earbuds

Process: Insert the earbuds into the charging case in the correct orientation and close the lid. The Red LED on the case turns on for 2 seconds when the lid is opened during charging and turns off when the lid is closed. The case automatically switches off to save power once earbuds are fully charged.

Note: Before first use, fully charge the earbuds. Keep the charging case lid closed while charging.

Battery Status Indication: RED blink (3 times) when the case lid opens indicates low earbud battery. BLUE blink (3 times) when the case lid opens indicates earbud battery between 30%-100%.

Power On

Smart Power On: Simply open the charging case lid when the earbuds are inside. The earbuds power on automatically, connect, and enter connection mode via the Insta Wake N' Pair™ technology.

Manual Power On: Long touch the Capacitive Touch Control (CTC) on both earbuds for 3 seconds.

Connection Mode: After powering on, the primary earbud shows alternate red and blue LED flashes, and the secondary earbud shows blue LED flashes every 5 seconds, indicating connection mode.

Connection Mode

Pairing: Turn on Bluetooth on your phone or media device and scan. Search for 'Airdopes Crude' and pair.

Confirmation: Congratulations! Your earbuds are now connected successfully via Bluetooth.

Notes:

• Pairing mode lasts for 5 minutes. If missed, reconnect and repeat the procedure.
• Airdopes Crude remembers previously connected devices and will automatically reconnect when switched on within range.

Single Earbud Usage

Both earbuds can be used in mono mode. Use Smart/Manual Power On for the desired earbud. The selected earbud enters connection mode (red and blue LED flashes). Turn on Bluetooth on your device and search for 'Airdopes Crude' to connect.

Notes:

• To switch to Stereo mode, take out the other earbud from the case. It will automatically power on and pair with the selected earbud.
• Track skipping or returning to previous tracks is not possible in Mono mode.

Voice Assistant

Activation: Long touch the CTC on the left earbud for 3 seconds to activate the default smart voice assistant (e.g., Google Assistant, Siri). ?

Usage: The voice assistant screen will pop up, allowing you to issue commands.

Tips: Try commands like "What is the weather?", "Play a song", or "Set a reminder".

Note: If the voice assistant does not trigger, ensure it is enabled in your media device's settings.

ENx™ Mode

Our ENx™ technology algorithm cancels background noise, ensuring clear voice calls. The quad microphones are equipped with ENx™ and activate by default, allowing you to speak clearly in any environment, such as traffic, railway stations, or airports. ?

BEAST™ Mode

Activation: Long touch the CTC on the right earbud for 3 seconds to switch to Low Latency mode, known as BEAST™ Mode. A sound prompt confirms activation.

Deactivation: Long touch the right CTC for 3 seconds again to turn it off and return to Music Mode.

Purpose: Designed for gamers, BEAST™ Mode significantly reduces latency and enhances the overall gaming experience. ?

Manual Power Off

Process: Long touch both CTCs for 5 seconds to manually power off the earbuds. Place them back inside the charging case and close the lid.

Smart Power Off

Process: After usage, remove both earbuds from your ears. Place them back into the charging case in the correct orientation and close the lid. The earbuds will automatically switch off and enter charging mode.

Factory Reset

Perform a factory reset if you encounter operating difficulties. ⚙️

Note: Before resetting, clear 'Airdopes Crude' from your device's pairing history by selecting 'Forget Device'.

Steps:

1. Take out the earbuds from the case.
2. Long touch both CTCs for 5 seconds one after another.
3. Place the earbuds inside the case and close the lid. Wait for 5 seconds.
4. The case LED will flash 5 times, indicating a successful factory reset.
5. Take out the earbuds and perform a fresh connection.

Congratulations! Your Airdopes Crude has been reset. ✔️

Quick Guide on Functionalities

• Voice Assistant: Long touch left CTC for 3 seconds. ?
• Answer Call: Single tap CTC on either earbud.
• Hang Up / Reject Call: Double tap CTC on either earbud.
• Play/Pause Music: Single tap CTC on either earbud.
• Next Track: Double tap right earbud's CTC. ▶️
• Previous Track: Double tap left earbud's CTC. ◀️

Note: Volume control is managed via the media device only.

Specifications

Warning

• ⚠️ Please follow the instructions for operation.
• Please do not use the earbuds in extreme temperatures.
• Please do not use the product near water.
• Keep the product away from heat sources, as heat may cause damage.
• Do not jam ports such as the charger port or LED port.
• It is recommended to use the product at moderate volume levels to protect hearing and extend the earbuds' service life.