boAt Airdopes 200 Plus

Introduction

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 200 Plus. This manual serves as a guide to the unparalleled shores of the auditory realm. Knowledge of Bluetooth and device connectivity is essential for steering this boat, and therefore thorough reading of this manual is strongly recommended. You may also refer to it when facing any difficulty.

Package Contents

• 1x Pair of TWS Earbuds
• 1x Charging Case
• 1x Type-C Charging Cable
• 1x User Manual
• 1x Warranty Card
• 1x Catalogue
• 1x FAQ Card

Overview

Features Capacitive Touch Control (CTC) on the earbuds.

Power On (First Time User)

1. Smart Power On: Open the lid of the charging case (with earbuds inside). The earbuds power on automatically, connect, and enter connection mode via Insta Wake N' Pair (IWPTM) technology.
2. Manual Power On: Long touch the CTC on both earbuds for 3 seconds to manually power on.

Connection Mode Indication: Alternate red and blue LED flashes on the primary earbud, and blue LED flashes once every 5 seconds on the secondary earbud.

Connection Mode

1. Turn on Bluetooth functionality on your phone/media device and scan.
2. Search for 'Airdopes 200 Plus' and pair accordingly.

Congratulations! Your earbuds are now connected successfully via Bluetooth.

Note: Pairing mode lasts for 5 minutes. If missed, reconnect. Airdopes 200 Plus automatically reconnects to previously connected devices in range.

Troubleshooting Connection: If the device doesn't enter pairing mode or earbuds enter pairing mode separately, tap 9 times on either earbud to fix the issue.

Single Earbud Usage

1. Both earbuds can be used in mono mode. Use Smart / Manual Power On for the desired earbud.
2. The selected earbud enters connection mode (red and blue LED flashes).
3. Turn on Bluetooth on your phone/media device and search for 'Airdopes 200 Plus' to connect.

Notes: To switch to Stereo mode, take out the other earbud; it will automatically power on and pair. Track skipping or returning to previous tracks is not possible in Mono mode.

Quick Guide on Functionalities

• Activate Voice Assistant: Long touch either CTC for 3 seconds.
• Manual Power On: Long touch both CTCs for 3 seconds.
• Manual Power Off: Long touch both CTCs for 5 seconds.
• Factory Reset: Long touch both CTCs for 5 seconds.

Charging the Earbuds

1. Place earbuds back into the charging case in the correct orientation and close the lid.
2. When the case lid is opened for charging, the red LED turns on for 2 seconds. The LED stays off when the lid is closed.
3. Once fully charged, the case automatically switches off to save power, and the red LED turns off.

Note: It is recommended to fully charge earbuds before first use. Keep the case lid closed while charging.

Charging the Case

Plug one end of the provided cable into the case and connect the other end to a computer, wall adapter, or power bank.

Remaining Case Battery LED Indications:

Case LED Indication When Earbuds Are Charging:

• CYAN for 5 seconds: Indicates LEFT bud is charging from the Case.
• PURPLE for 5 seconds: Indicates RIGHT bud is charging from the Case.
• BLUE for 5 seconds: Indicates both buds are properly charged.

Basic Functions

• Voice Assistant: Long touch either CTC for 3 seconds to activate the default voice assistant.
• Answer Call: Single tap the CTC on either earbud.
• Hang Up / Reject Call: Double tap the CTC on either earbud.
• Play/Pause Music: Single tap either earbud's CTC.
• Next Track: Double tap the right earbud's CTC while playing music.
• Previous Track: Double tap the left earbud's CTC while playing music.

Note: Volume can only be controlled via the media device.

BEAST™ Mode

Triple tap the left CTC to switch to Low Latency mode, known as BEAST™ Mode. A sound prompt notifies activation. Triple tap the left CTC again to turn it off and return to standard Music Mode. Made for gamers, BEAST™ Mode significantly reduces latency and improves the gaming experience.

Voice Assistant

1. Long touch the CTC on either earbud for 3 seconds to activate the smart voice assistant.
2. The respective voice assistant screen pops up; place commands as needed.

Tips: Try commands like "What is the weather?", "Play a song", "Set a reminder".

Note: If the voice assistant doesn't trigger, enable the functionality via your media device settings.

ENx™ Tech

The ENx™ tech algorithm cancels background noise, ensuring clear voice calls via quad mics. ENx™ is activated by default and does not require manual activation. Deliver your voice without interruptions in any environment like traffic, railway stations, airports, or workspaces.

Smart Power Off

1. After usage, remove both earbuds from your ears.
2. Place the earbuds back into the charging case in the correct orientation and close the lid. The earbuds automatically switch off and enter charging mode.

Manual Power Off

1. Long touch either CTC for 5 seconds to manually power off the earbuds.
2. Once powered off, place them back inside the case and close the lid.

Factory Reset

Perform a factory reset if experiencing operational difficulties. Before resetting, clear "Airdopes 200 Plus" from your device's pairing history by forgetting the device.

1. Take out the earbuds from the charging case and long touch the CTC for 5 seconds on both earbuds.
2. Place the earbuds inside the case (they will automatically power off).
3. Close the lid and wait for 5 seconds. A successful factory reset is indicated by the Red LED blinking quickly 5 times on the case and earbuds.
4. Take out the earbuds and perform a fresh connection.

Note: All steps must be performed for a complete factory reset.

Congratulations! Your Airdopes 200 Plus has been Reset.

Specifications

Warnings

• Please follow the instructions to operate.
• Please do not use the earbuds in extreme temperatures.
• Please do not use the product near water.
• Keep the product away from heat sources, as heat may damage it.
• Do not jam ports such as the charger port, LED port, etc.
• It is recommended to utilize the product below maximum volume to protect hearing and extend the ear-buds' service life.