boAt Airdopes 121 PRO

Introduction

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 121 PRO. Please consider this manual as your guiding map towards the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat, and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

Package Contents

• 1x Pair of TWS Earbuds
• 1x Charging Case
• 1x USB-C Cable
• 2x Pair of Extra Earmuffs
• 1x FAQ Card
• 1x User Manual
• 1x Warranty Card
• 1x Catalogue
• 1x Read Me Card

Power On

Smart Power On

To switch the earbuds on (Smart Power On), simply open the lid of the charging case (when earbuds are inside). Courtesy our IWPT™ (Insta Wake N' Pair) technology, the earbuds power on automatically, their LEDs begin to flash blue for 2 seconds, they get connected and enter the connection mode.

Manual Power On

[Long Press] the Capacitive Touch Control (CTC) on both earbuds for 3 seconds to manually power on the earbuds.

After powering on, the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes on the primary earbud and blue LED flashes once every 5 seconds on the secondary earbud.

Connection Mode

Turn on the [Bluetooth] functionality on your phone/media device and scan. Search for 'Airdopes 121 PRO' and pair accordingly. Congratulations! Your earbuds are now connected successfully via [Bluetooth].

Note: Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect the earbuds and follow the above-mentioned procedure. Airdopes 121 PRO remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range. Once the earbuds get connected to your media device, the LED flashes once every 20 seconds.

Single Earbud Usage

Both earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud. The selected earbud automatically enters the connection mode indicated by red and blue LED flashes. Turn on [Bluetooth] on your phone/media device and search for 'Airdopes 121 PRO' to connect.

Note: To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage. You can only switch to next track in single earbud mode.

Charging the Earbuds

1. Please insert the earbuds back inside the charging case in the correct orientation and [Close Lid].
2. During charging, the indicators on the earbuds turn solid red.
3. Once the earbuds get fully charged, the charging case automatically switches off to save power; the earbuds' indicator turns blue and then switches off.

Charging the Case

To charge the case, plug one end of the provided [USB-C Cable] into the case and connect the other end to a computer/wall adapter/powerbank, etc. You can stay updated with the case's remaining battery by its Battery Indicator Screen.

Basic Functions

• [Voice Assistant]: [Long Press] the left CTC for 3 seconds to activate your default smart voice assistant.
• Answer Call: [Single Tap] the CTC on either earbud to answer an incoming call.
• Hang Up / Reject Call: [Double Tap] the CTC on either earbud to end / reject call.
• [Play/Pause] Music: [Single Tap] either earbud's CTC to play or pause music.
• [Next Track]: When playing music, [Double Tap] the right earbud's CTC to skip to the next song.
• [Previous Track]: When playing music, [Double Tap] the left earbud's CTC to return to the previous song.

BEAST™ Mode

[Long Press] the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt. [Long Press] the right CTC for 3 seconds again to turn it off and return to standard Music Mode.

Made for the Gamers By Gamers, BEAST™ Mode reduces the latency significantly and improves the overall gaming experience.

ENx™ Tech

Our ENx™ (Environmental Noise Cancellation) tech algorithm cancels out background noise so that you can be heard crystal clear via voice calls. One need not activate ENx™ as the mics are already equipped with it and activated by default. Deliver your voice without interruptions anywhere – traffic, railway stations, airports, workspace, literally anywhere!

Note: Volume can only be controlled via the media device.

Smart Power Off

1. After usage, remove both earbuds from your ears.
2. Place the earbuds back into the charging case in the correct orientation and [Close Lid]. The earbuds automatically switch off (and enter charging mode).

Manual Power Off

1. [Long Press] both CTCs for 5 seconds to manually power off the earbuds.
2. Once the earbuds get turned off, place them back inside the case and [Close Lid].

Factory Reset

Perform the factory reset in case you feel any difficulty while operating your Airdopes. Note: Before performing reset, clear "Airdopes 121 PRO" from pairing device history by forgetting the device.

1. Open the cover lid of the case and ensure the earbuds are being kept inside the case.
2. [Long Press] the [Reset Button] on the case for 5 seconds; white LED on the case flashes for 5 seconds to indicate a successful reset.
3. [Close Lid] and reopen it again after a few seconds to perform fresh connection.

Congratulations! Your Airdopes 121 PRO has been Reset.

Specifications

Warning

Please follow the instructions to operate.

• Please don't use the earbuds in extreme temperatures.
• Please don't use the product near water.
• Please keep the product away from heat sources, as the heat may damage it.
• Don't jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds' service life.

Note: Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging. When the remaining power of the earbuds is below 20%, the red LED flashes 3 times every 30 seconds and there's a low power reminder sound prompt once every 5 minutes. When the earbud's remaining battery is between 30%-100%, blue LED blinks thrice if the case lid gets opened.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 288.43KB

Document Document

Related Documents

	boAt Airdopes 161 ANC ELITE User Manual & Specifications Comprehensive guide for boAt Airdopes 161 ANC ELITE wireless earbuds, covering setup, features like ANC and BEAST™ Mode, troubleshooting, and specifications.
	boAt Airdopes Joy: Premium Wireless Earbuds User Manual A comprehensive guide to the boAt Airdopes Joy wireless earbuds, covering setup, usage, features like ENx™ and BEAST™ Mode, charging, and specifications.
	boAt Airdopes Atom 83 User Manual and Specifications Guide Comprehensive user manual for the boAt Airdopes Atom 83 true wireless earbuds, detailing setup, features, functions, charging, specifications, and important warnings.
	boAt Airdopes Flex 454 ANC User Manual and Specifications Comprehensive guide to the boAt Airdopes Flex 454 ANC true wireless earbuds, covering setup, features like Active Noise Cancellation (ANC), BEAST™ Mode, AI ENx™ Tech, multi-point connectivity, specifications, and troubleshooting.
	boAt Airdopes 200 Plus User Manual: Wireless Earbuds Guide Comprehensive user manual for the boAt Airdopes 200 Plus True Wireless Stereo (TWS) earbuds, covering setup, features, charging, troubleshooting, and specifications.
	boAt Airdopes Ace True Wireless Earbuds User Manual Comprehensive user manual for the boAt Airdopes Ace True Wireless Earbuds, covering setup, usage, charging, features like BEAST™ Mode and ENx™ technology, and specifications.
	boAt Airdopes 71: TWS Wireless Earbuds User Manual & Specifications Comprehensive guide to the boAt Airdopes 71 True Wireless Stereo (TWS) earbuds. Learn about features like BEAST™ Mode, ENx™ Tech, IWP™, pairing, charging, basic functions, and specifications.
	boAt Airdopes Genesis User Manual: Features, Specs, and Troubleshooting Comprehensive user manual for boAt Airdopes Genesis TWS wireless earbuds. Learn about pairing, functions, BEAST™ Mode, ENx™ Tech, specifications, and troubleshooting.