MAULjura 82572 LED Lamp

Brand: MAUL

Model: MAULjura 82572

Product Overview

The MAULjura 82572 is an LED lamp designed for various lighting applications. This document outlines the components and provides installation instructions.

Key Components and Part Numbers:

LED Module (2 pieces): Art.-No.: 8257109.205
LED Module (5 pieces): Art.-No.: 8257109.200
Dimmable LED Driver: Art.-No.: 8257109.210A
Lamp Base/Stand Component: Art.-No.: 8257209.220

Technical Specifications (LED Driver):

Model: BECANA JESSAM / BK-CJL060-1650AM

Input: 200-240V ~ 50/60Hz, 0.38A Max, PF 0.95

Output: 12-38V DC, 1650mA, 62.7W, 500V DC Max

Certifications: CE, SELV, TÜV Rheinland Certified

Operating Temperature: ta 45°C max.

Installation Instructions

The following steps detail the process of installing and assembling the MAULjura 82572 LED lamp. Ensure all components are handled with care.

Step 1: Prepare the Lamp Housing

The image shows the underside of the lamp housing with multiple screws circled in red, indicating points for disassembly or component attachment. A screwdriver is shown engaging with one of the screws.

Step 2: Remove Existing LED Strips

This step involves removing the LED strips. The image highlights 8 screws (marked '8 x') securing the LED strips. The text "MLE 22029-MAULJura-F-SMD2835-78LED-A" and "20x240-0008 014" are visible on the LED strip itself.

Step 3: Disconnect LED Strips

This step shows how to disconnect the LED strips. Instructions are provided in German and English: "DRÜCKEN PUSH a)" and "ZIEHEN PULL b)". This indicates a push-and-pull mechanism for disconnecting the electrical connectors.

Step 4: Remove Lamp Head Components

This step involves further disassembly of the lamp head. The image shows the underside of the lamp, with numerous screws circled in red, similar to Step 1, suggesting the removal of the main housing or internal components.

Step 5: Access Internal Components

This step shows the lamp housing being opened or accessed, with a screwdriver being used to potentially loosen screws or pry open a panel. The text "ASTXE-MUIJAMAN" is visible.

Step 6: Disconnect and Remove LED Strips (Second Set)

This step shows the process of disconnecting another set of LED strips. The text "DRÜCKEN & ZIEHEN PRESS & PULL" is shown, along with "5 x", indicating five connection points to be released. The image also shows a close-up of the electrical connector being manipulated.

Step 7: Connect the LED Driver

This step focuses on connecting the LED driver. The image shows the LED driver unit (Art.-No.: 8257109.210A) and a separate component with a dial, likely a dimmer. The driver has input and output terminals clearly marked.

Step 8: Install the LED Driver

This step shows the base of the lamp stand. Two mounting points are circled in red, indicating where the LED driver or a related component is to be attached.

Step 9: Connect Wiring

This step illustrates connecting the wiring. The image shows a cable entering the lamp stand through an opening. A close-up view shows the wires being connected, with a screw terminal circled in red for securing the connection.

Step 10: Secure the Lamp Head

This step shows a component being pulled, with the instruction "Mutter abschrauben!! Unscrew the nut!!". This suggests a mechanism for securing or releasing the lamp head.

Step 11: Final Component Attachment

This step shows the underside of a component, possibly the lamp head, with four screws circled in red on each side. The text "NLE-222029-Connect-down-B rev1.0" and "94V-0 E511451" are visible, referring to the component's specifications.

Step 12: Connect LED Strips to Driver

This final step shows the LED driver and the LED strips. Instructions "DRÜCKEN PRESS (a)" and "ZIEHEN PULL (b)" are repeated for connecting the LED strips to the driver, indicating a push-and-pull connector system.

Removal Instructions

The process for removing components is the reverse of the installation steps. Pay attention to the disconnection procedures for the LED strips and driver.

	MAULjura 82571 LED Floor Lamp Assembly and Component Guide Comprehensive guide for assembling and replacing components of the MAULjura 82571 dimmable LED floor lamp, detailing steps for LED modules, driver, and dimmer installation.
	MAULjura 825 72 LED Lamp Assembly and Component Guide Detailed assembly instructions and component information for the MAULjura 825 72 LED lamp, including part numbers for LED modules, drivers, and dimmers, along with step-by-step guidance for replacement and connection.
	MAULjura 825 71 LED Lamp - User Manual and Safety Instructions This document provides comprehensive instructions for the MAULjura 825 71 LED lamp, including intended use, general safety warnings, assembly steps, technical specifications, and spare parts information. It is designed for precise work in dry indoor environments.
	MAULjura 825 71 LED Floor Lamp - User Manual and Assembly Guide Comprehensive guide for the MAULjura 825 71 LED floor lamp, covering intended use, safety instructions, assembly, operation, and spare parts. Features include dimmable lighting and energy efficiency class D.
	MAULjet Dimmable LED Lamp Installation and Removal Guide Comprehensive instructions for installing and removing components of the MAULjet dimmable LED lamp, including LED driver and module replacement, with detailed steps and safety information.
	MAULjet 825 74 LED Lamp Assembly and Maintenance Guide Detailed instructions for assembling, disassembling, and maintaining the MAULjet 825 74 LED lamp, including component identification and technical specifications.
	MAULjuvis 825 86 LED Lamp Assembly and Maintenance Guide Detailed instructions for assembly, disassembly, and maintenance of the MAULjuvis 825 86 LED lamp, covering component identification, removal, and reassembly procedures.
	MAULsirius 825 93 LED Lamp Assembly and Installation Guide Comprehensive guide for assembling and installing the MAULsirius 825 93 LED lighting system, detailing component connections and mounting procedures.