MAULjura 825 71 LED Floor Lamp

Introduction and Intended Use

Dear User, please read all enclosed operating instructions and information carefully and keep them for future reference.

Intended Use: The MAULjura lamp is designed for high-precision work in dry indoor areas such as homes, offices, or workshops. It operates within an ambient temperature range of -10°C to +40°C and a relative humidity of up to 95%. The luminaire is intended for mounting on horizontal surfaces. Please follow the included illustrations for mounting.

General Safety Instructions

Please carefully read all included operating instructions and information.
Follow all warnings indicated on the device and in the documentation.
Use the luminaire only when it is in technically perfect condition, being aware of dangers and risks.
National safety regulations must be observed for installation and operation.
Install the lamp only on a suitable surface using appropriate mounting materials.
This lamp is intended for illuminating indoor rooms and work areas only.
Do not use in potentially explosive atmospheres, as this can lead to explosions, death, or serious injury.
Installation, repairs, and disassembly should only be performed by a qualified electrician unless otherwise stated.
Connect the luminaire to a power supply with a protective earth conductor (if applicable).
Verify that the mains voltage matches the operating voltage and frequency specified on the nameplate.
Do not use damaged luminaires.
Always disconnect the lamp from the power supply before performing any work on it.
Do not alter or modify the luminaire.
Do not hang anything from or attach anything to the lamp.
Do not cover the luminaire.
Keep children away from the luminaire; it is not suitable for children.
Dispose of packaging according to local regulations.
Disconnect the lamp from the power supply and allow it to cool down before cleaning or maintenance.
Clean only with a dry, soft, and lint-free cloth.
If the power cord is damaged, it must be replaced by the manufacturer, their service agent, or a similarly qualified person to avoid hazards.
Light Source Replacement: Refer to the operating instructions or packaging for details on whether replacement requires a trained electrician or a qualified person.

Product Features and Symbols

Electrical Protection Class II: Features sufficient insulation between live and touchable parts, requiring no protective earth conductor.
Usage Environment: The lamp is intended for use only in dry indoor areas.
Hazard Warning: General symbol indicating caution is required.
Dimmable: The lamp's brightness can be adjusted.
Beam Angle: The half-intensity angle (beam angle) is 100°.
Qualified Personnel: Indicates that work should be performed by a skilled electrician.
Observe Instructions: Symbol indicating the need to follow instructions.
Replaceable Components: The operating device and LED light source are replaceable by a qualified electrician.
CE Marking: Indicates conformity with European directives and product-specific standards.
Disposal Information: The product should not be disposed of with unsorted household waste. It must be collected as electrical waste at designated facilities. Contact local authorities for disposal options.

Parts and Assembly

Parts Included:

1: Base/Mounting Bracket
2: Lamp Head Assembly
3: Lower Pole Section
4: Upper Pole Section
10: Power Cord with Plug (approx. 2.50 m length)

Hardware Pack:

5: 6 x M4 x 25 screws
6: 2 x M4 x 14 screws
7: 6 x Ø4.2 washers
8: 1 x SW3 Allen key
9: 1 x SW2.5 Allen key

Assembly Steps:

Attach Base to Pole: Secure the base/mounting bracket (1) to the lower pole section (3) using three M4 x 25 screws (5) and washers (7), tightened with the SW3 Allen key (8).
Connect Pole Sections: Slide the upper pole section (4) into the lower pole section (3). Ensure the internal connector aligns and connects securely.
Secure Pole Connection: Use the two M4 x 14 screws (6) and washers (7) to fasten the joined pole sections together. Tighten with the SW2.5 Allen key (9).
Attach Lamp Head: Mount the lamp head assembly (2) onto the top of the assembled pole structure.
Connect Power: Plug the power cord (10) into the designated port on the lamp.

Operation

The lamp features a control knob for power and dimming. Turn the knob clockwise to increase brightness (dim) and counter-clockwise to decrease it. The knob also functions as an on/off switch; press it to turn the lamp on or off.

Spare Parts

2 x LED Strips (Art.-No.: 8257109.205)
1 x LED Driver (Art.-No.: 8257109.210A)
1 x Complete Lamp Assembly (Art.-No.: 8257109.220)
5 x LED Strips (Art.-No.: 8257109.200)

Manufacturer Information

Manufacturer: Jakob MAUL GmbH

Address: Jakob-Maul-Str. 17, D-64732 Bad König

Contact: Tel: +49 (0)6063/502-100, Fax: +49 (0)6063/502-210, Email: contact@maul.de

Website: www.maul.de

Energy Efficiency Class Declarations

This product contains light sources with energy efficiency class < D >.

	MAULjura 825 71 LED Lamp - User Manual and Safety Instructions This document provides comprehensive instructions for the MAULjura 825 71 LED lamp, including intended use, general safety warnings, assembly steps, technical specifications, and spare parts information. It is designed for precise work in dry indoor environments.
	MAULjura 82571 LED Floor Lamp Assembly and Component Guide Comprehensive guide for assembling and replacing components of the MAULjura 82571 dimmable LED floor lamp, detailing steps for LED modules, driver, and dimmer installation.
	MAULjura 825 72 LED Lamp Assembly and Component Guide Detailed assembly instructions and component information for the MAULjura 825 72 LED lamp, including part numbers for LED modules, drivers, and dimmers, along with step-by-step guidance for replacement and connection.
	MAULjura 82572 LED Lamp Installation and Component Guide Detailed guide for the MAULjura 82572 LED lamp, covering component identification, installation steps, and driver information. Includes part numbers and technical specifications.
	MAULjura 825 72 LED Desk Lamp - User Manual and Assembly Guide Comprehensive guide for the MAULjura 825 72 LED desk lamp, covering intended use, safety instructions, assembly, operation, and spare parts. Features adjustable brightness and clamp mounting for precise work.
	MAULjet Dimmable LED Floor Lamp - Assembly and Operation Guide Comprehensive guide for assembling and operating the MAULjet dimmable LED floor lamp (Model 825 75). Includes parts list, step-by-step instructions, and operational details.
	MAULsenja 825 89 LED Desk Lamp - User Manual and Operation Guide Comprehensive guide for the MAULsenja 825 89 LED desk lamp, covering intended use, safety instructions, assembly, operation, sensor functions, and spare parts. Features dimming and motion/daylight sensors.
	MAULjura LED Floor Lamp - Technical Specifications and Dimensions Detailed technical datasheet for the MAULjura LED floor lamp (Art.-No. 82571). Provides comprehensive information on dimensions, power, features, materials, and manufacturer details.