CARE AND MAINTENANCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test the cleaning method on a hidden area before using it over the entire surface.
NOTICE
- Please ensure all parts indicated are present before beginning assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finished product during assembly.
- This item may require periodic tightening.
- Do not tighten bolts until completely assembled.
Part List and Hardware List
Piece | Description | Picture | Quantity |
---|---|---|---|
A | DRAWER | [Image of a dresser drawer] | 1 X |
B | LEG | [Image of a furniture leg] | 4 X |
H1 | ALLEN BOLT 5/16" 2" | [Image of an Allen bolt] | 8 X |
H2 | ALLEN KEY 4mm | [Image of an Allen key] | 1 X |
H3 | Anti-Tip Hardware | [Image of anti-tip straps, screws, and wall anchors] | 2X |
PREPARATION
Before beginning assembly, ensure all parts are present and compare them with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen key.
Assembly Steps
Step 1: Attach Legs
Attach the 4 legs (B) to the corresponding positions on the underside of the dresser body (A). Use the Allen key (H2) to secure them with 8 Allen bolts (H1). Refer to the diagram for precise placement.
Step 2: Secure to Wall (Anti-Tip Installation)
Straighten the assembled dresser. Follow the installation instructions for the anti-tipping hardware to secure the dresser to the wall using the 2 provided straps. Assembly is now completed.
WARNINGS
⚠️ WARNING
- Weight Capacity: 25 lbs on top of the product.
- Warning: Do not stand on the product.
- Warning: Do not over torque bolts.