FRÖSJÖN Shelving Unit
Brand: IKEA
Important Safety Information
WARNING: Furniture tip-over can cause serious injury or death. To reduce the risk of furniture tip-over:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Assembly Instructions
Before You Begin
It is recommended that two people assemble this product. Ensure you have the necessary tools: a screwdriver and a spirit level. Assemble on a soft, clean surface to avoid scratching the product.
Parts Included
- Screws (16x)
- Small screws (5x)
- Dowels/Fixings (3x)
- Anti-tip bracket (1x)
Step 1: Assemble the Base Frame
Lay out the main frame pieces. Insert the dowels/fixings (3x) into the designated holes on the base frame components. Connect the base frame parts using the provided screws (16x).
Step 2: Attach Vertical Supports
Attach the vertical support poles to the base frame. Secure them using the provided screws (6x) and fixings (part number 120940, 130498).
Step 3: Add Shelves
Insert the first set of shelves. Secure them to the vertical supports using the provided screws (5x) and fixings (part number 120940, 130498).
Step 4: Continue Adding Shelves
Rotate the structure as shown in the diagram. This step likely involves orienting the unit for the next set of shelves.
Step 5: Add More Shelves
Continue adding the remaining shelves. Secure each shelf to the vertical supports using screws (5x) and fixings (part number 120940, 130498).
Step 6: Place Shelves
Insert the remaining shelves into their positions, indicated by arrows pointing downwards onto the shelf supports.
Step 7: Final Shelf Placement
Place the final shelves. The diagram shows 10 shelves being placed.
Step 8: Secure Shelves
Secure the top parts of the unit. Use screws (5x) and fixings (part number 10106941, 144201) to attach the top horizontal bars.
Step 9: Adjust Feet
Adjust the leveling feet at the bottom of the unit to ensure stability. The diagram shows [adjustment arrows] indicating adjustment in both directions.
Step 10: Wall Anchoring
⚠ Crucial Safety Step: Secure the unit to the wall using the provided anti-tip device and screws (2x). Follow the diagram to attach the bracket to the unit and then to the wall.