FRÖSJÖN Shelf Unit

Assembly Guide

Tools Required

• Screwdriver
• Spirit Level

Assembly Notes

• Assembly by two people is recommended.
• Handle parts with care to avoid damage.
• Ensure all parts are correctly aligned before tightening.

Parts List

• 16x Screws (Part numbers: 120940, 130498)
• 6x Small Parts (e.g., nuts/washers, Part numbers: 10106941, 144201)
• 4x Feet (Part numbers: 10106975, 10116100)
• 4x Wall Brackets/Anti-tip Device Parts (Part numbers: 10106975, 10116100)
• 1x Handle (Part number: 100001)

Assembly Steps

Step 1: Attach Feet

Attach the 4 feet (Parts: 10106975, 10116100) to the base frame.

Step 2: Assemble Side Supports

Connect the side support pieces to the base frame. Use 5x screws (Parts: 120940, 130498) and the handle (Part: 100001) as a tool to secure these parts.

Step 3: Attach Top Frame

Attach the top horizontal frame piece to the side supports. Use 3x screws (Parts: 120940, 130498) and the handle (Part: 100001) as a tool to secure.

Step 4: Install Back Supports

Install the rear support bars to the assembled frame. Use 8x screws (Parts: 120940, 130498) and the handle (Part: 100001) as a tool to fix them in place.

Step 5: Place Shelves

Position the shelves onto the frame. The shelves are designed to rest on the frame's supports.

Step 6: Secure Shelves

Secure the shelves using 6x screws.

Step 7: Wall Anchoring

Secure the unit to the wall using the provided anti-tip device. Attach the wall brackets (Parts: 10106975, 10116100) to the unit and the wall using 6x screws. Ensure appropriate wall fixings are used (not included).

Step 8: Leveling

Adjust the feet of the unit to ensure it is stable and level on the floor. Rotate the feet clockwise or counter-clockwise as needed.

Step 9: Attach Handle

Attach the handle (Part: 100001) to the top rail of the unit using 2x screws.