HYLLIS Shelving Unit
This document provides assembly instructions and safety warnings for the IKEA HYLLIS shelving unit.
Important Safety Information
⚠️ WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Assembly Instructions
Required tools: Screwdriver, Spirit Level.
Step 1: Prepare Frame Components
This step involves preparing the main frame components. Four long metal bars are shown. Four corner connectors (part 157476) are to be attached to the ends of these bars using screws (part 190018). The diagram zoom shows 4 screws per corner connector, totaling 16 screws for this step.
Parts shown: 4x corner connectors (157476), 4x long metal bars, screws (190018).
Step 2: Assemble Base and Lower Shelves
Begin assembling the base and lower shelves. Two side panels and several horizontal shelf pieces are connected using screws (part 190018). The diagram zoom indicates 10 screws are used in this step to attach the shelves to the side panels.
Parts shown: Side panels, shelf pieces, screws (190018).
Step 3: Continue Frame Assembly
Continue building the main frame and attaching more shelves and side supports. Screws (part 190018) are used for these connections. The diagram zoom indicates 10 screws are used in this step.
Parts shown: Frame components, shelf pieces, screws (190018).
Step 4: Complete Frame Assembly
The unit is rotated or flipped. Assembly continues on the other side, attaching more shelves and supports with screws (part 190018). The diagram zoom indicates 10 screws are used in this step.
Parts shown: Frame components, shelf pieces, screws (190018).
Step 5: Final Assembly and Wall Attachment
Complete the assembly of the tall unit. This step involves attaching the back panel or reinforcing structure. It shows 2 specific fasteners (marked '2x') and 40 screws (marked '40x', part 190018) being used. The diagram zoom shows a screwdriver being used with screws.
The final diagram shows the completed HYLLIS unit. A prominent warning symbol ⚠️ is displayed, reiterating the critical importance of securing the furniture to the wall using appropriate wall fasteners to prevent tip-over accidents.
Parts shown: Back panel/reinforcement, fasteners (2x), screws (40x, 190018).
Important: Wall Attachment
For your safety, it is crucial to secure the HYLLIS shelving unit to the wall using the provided wall attachment devices. Wall screws and plugs are NOT included and must be purchased separately, suited to your specific wall type. Consult a professional if unsure.
