RÅGRUND Shelving Unit
Important Safety Information
Risk of Furniture Tip-Over
Children have died from furniture tipping over. To reduce the risk of furniture tipping over:
- ⚠️ Always install the anti-tip device supplied with the furniture.
- [no-tv-on-furniture] Never place a television on this product.
- [child-climbing-warning] Never allow children to stand, climb, or hang on drawers, doors, or shelves.
- [no-multiple-drawers] Never open more than one drawer at a time.
- [heavy-items-lower] Place heavier items in the lower drawers.
(Note: Safety warnings from original document in Spanish, Catalan, Basque, and Galician have been consolidated into English.)
Parts Included
| Quantity | Description | Part Number |
|---|---|---|
| 16x | Screw | 130608 |
| 1x | Screw | 109041 |
| 2x | Washer | 100006 |
| 1x | Anti-tip Bracket | 100823 |
| 1x | Hex Key | 106989 |
Assembly Instructions
Tools Required
? Screwdriver, ? Hammer
Step 1: Assemble Frame
Diagram Description: The diagram shows two side panels and three shelves being assembled. A person is shown using a screwdriver and a hex key to fasten components with screws (130608). The diagram indicates that 8 screws are used for this step.
Step 2: Continue Frame Assembly
Diagram Description: This step continues the frame assembly, showing the attachment of the remaining shelves to the side panels using screws (130608) and the hex key (106989).
Step 3: Install Anti-Tip Device
Diagram Description: The assembled shelving unit is shown. A close-up view details attaching the anti-tip bracket (100823) to the top rear of the unit using screws (100823) and washers (100006). The bracket's other end is shown being secured to a wall. A warning symbol (⚠️) is displayed prominently. An inset shows a crossed-out symbol indicating incorrect wall fixing.
Attach the anti-tip bracket (100823) to the top rear of the shelving unit using screws (100823) and washers (100006). Secure the other end of the bracket to the wall using appropriate wall fixings (not included). Ensure the unit is stable and cannot tip over. Follow wall manufacturer's instructions for secure mounting.
