LÅDMAKARE Storage Unit
Important Safety Information
⚠️ WARNING: Furniture tip-over can cause serious or fatal crushing injuries. To prevent this, the furniture MUST be permanently fixed to the wall using the included wall attachment devices.
Wall fastening devices are not included as different wall materials require different types of fasteners. Use fasteners suitable for your home's walls. Consult a specialized dealer for advice on suitable fasteners.
Tools and Parts
- 4x Bolt (Part #10043592)
- 4x Dowel (Part #101449)
- 4x Screw (Part #151931)
- 4x Shelf support (Part #10097004)
- 4x Shelf (Part #158701)
- 4x Wall bracket (Part #126916)
- 4x Wall bracket (Part #10046118)
- Various screws (e.g., Part #114664, #10111468)
- Various fittings (e.g., Part #10111561)
- 1x Wrench (Part #10046118)
The following tools are recommended for assembly: Hammer, Screwdriver, Spirit Level, Drill, Ladder.
Assembly Steps
Step 1: Prepare Panels
Insert dowels (101449) into the designated holes on the panels. Secure these dowels by inserting bolts (10043592) and tightening them with a screwdriver, possibly using a hammer to tap them in gently.
Step 2: Connect Panels
Join the prepared panels by aligning the dowels with their corresponding holes on the connecting panel. Secure the connections using bolts (10043592). Note: Ensure no screws longer than 5mm are used in this step.
Step 3: Assemble Main Frame
Connect the side panels to the base and top panels to form the main frame of the unit. This involves inserting screws (10111468) into pre-drilled holes and securing them with cam locks (10111561). Insert the cam lock into its housing and turn it clockwise with a screwdriver to tighten the connection.
Step 4: Install Shelf Supports
Insert the shelf supports (10097004) into the pre-drilled holes on the inner sides of the unit at your desired shelf heights.
Step 5: Attach Wall Brackets to Unit
Attach the wall brackets (126916) to the top rear of the unit using screws (114664). Ensure they are firmly attached.
Step 6: Place Shelves
Carefully place the shelves (158701) onto the installed shelf supports.
Step 7: Attach Additional Wall Brackets
Attach the additional wall brackets (10046118) to the unit, typically at the top, using screws.
Step 8: Secure Unit to Wall
Position the unit against the wall where it will be placed. Mark the wall through the holes in the attached wall brackets. Use appropriate wall fasteners (not included) suitable for your wall type to securely attach the unit to the wall. The diagrams show various screw/fitting sizes (6mm, 12mm, 18mm) that may be needed for wall attachment.
Step 9: Attach Base Cover
Attach the decorative base cover or panel (10097004) to the bottom of the unit.
Step 10: Final Placement and Check
Ensure the unit is stable and correctly positioned. Double-check that it is securely anchored to the wall to prevent tip-over accidents.
Additional Information
For video assembly instructions or more details, please visit: https://m.qr.ikea.com/m/ladmakare-f3U5Y6
Related Documents
 |
LÅDMAKARE Assembly Instructions and Safety Guide | IKEA Comprehensive assembly instructions and crucial safety warnings for the IKEA LÅDMAKARE storage unit. Learn how to safely build and secure your furniture to prevent tip-over accidents. |
 |
LÅDMAKARE Assembly Instructions | IKEA Official assembly instructions for the IKEA LÅDMAKARE unit. Learn how to safely build and install your furniture with step-by-step guidance, including important safety warnings and a detailed parts list. |
 |
IKEA LÅDMAKARE Assembly Instructions and Safety Guide Comprehensive assembly instructions for the IKEA LÅDMAKARE furniture unit. This guide provides step-by-step assembly, detailed parts list, and crucial safety information regarding furniture tip-over prevention and wall fixation. |
 |
KALLAX Shelving Unit Assembly and Safety Guide | IKEA Comprehensive guide for assembling the IKEA KALLAX shelving unit, including essential safety warnings about furniture tip-over and step-by-step instructions for wall attachment. |
 |
LÅDMAKARE Assembly Instructions and Safety Guide Comprehensive guide for assembling the IKEA LÅDMAKARE furniture, including essential safety warnings about tip-over prevention and step-by-step instructions for wall mounting. |
 |
PLATSA Storage System Assembly and Safety Guide | IKEA Comprehensive assembly instructions and safety guidelines for the IKEA PLATSA storage system, emphasizing crucial wall attachment to prevent tip-over accidents. |
 |
BESTÅ Storage Unit Assembly Guide | IKEA Step-by-step assembly instructions for the IKEA BESTÅ storage unit, including essential safety warnings, a comprehensive parts list, and guidance for building and securely mounting your furniture. |
 |
JONAXEL Shelving Unit Assembly Instructions | IKEA Detailed assembly guide for the IKEA JONAXEL shelving unit. Learn how to safely assemble and secure your JONAXEL storage system to the wall. |