Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided. Screws(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| 10005716 | Screw | 18x |
| 142661 | Nut/Cap | 6x |
| 144262 | Screw | 12x |
| 130864 | Screw | 4x |
| 190018 | Screw | 1x |
| 10046350 | Washer | 4x |
| 10005757 | Screw | 4x |
| 10006156 / 10046377 / 10095771 | Bracket | 1x |
| 114664 | Bracket Assembly | 2x |
| 10006155 | Bracket | 1x |
| 100092 | Rod / Tool | 1x |
| 10090880 | Clip | 6x |
| 1003200 | Hook / Clip | 8x |
Assembly Steps
Step 1
Attach the bracket (10005757) to the top end of each of the two long side panels using 4x screws (10005757). The diagram shows a screw being inserted and rotated ?.
Step 2
Attach the drawer runners to the inside of the two long side panels using 8x screws (10005716). The diagram shows a hand ✋ pressing a clip mechanism to slide the runner into place, followed by inserting screws with a screwdriver ?.
Step 3
Attach the shelf support rails to the inside of the two long side panels. The diagram shows inserting a rail and securing it, likely with clips and screws.
Step 4
Attach the two bottom panels to the frame using 4x screws.
Step 5
Attach the two side panels to the base structure.
Step 6
Attach the back support rails to the frame.
Step 7
Attach the back panels to the frame using 4x screws.
Step 8
Attach the two middle divider panels to the base.
Step 9
Attach the two middle divider panels to the frame using 4x screws.
Step 10
Attach drawer runners to the inside of the middle divider panels using 2x clips. The diagram shows a hand ✋ pressing a clip mechanism.
Step 11
Attach the side panels to the main frame.
Step 12
Attach the base support rods to the bottom of the frame using 6x screws (10005716) and the tool (100092). The diagram shows inserting screws and turning with the tool ?.
Step 13
Attach the back panels to the frame using 10x screws.
Step 14
Attach the back panels to the frame.
Step 15
Attach the base support rods to the bottom of the frame using 6x screws (10005716) and the tool (100092) ?.
Step 16
Attach the back panels to the frame using 10x clips (1003200). The diagram shows clips being inserted into slots.
Step 17
Attach the top frame to the cabinet structure using 6x screws (100092) and the tool (100092) ?.
Step 18
Attach the door hinges to the cabinet frame using 6x caps (142661).
Step 19
Attach the door hinges to the cabinet doors. Use 1x screw (144262) and 1x bracket (10006155) per hinge.
Step 20
Attach the door handle mechanisms to the doors. Use 1x screw (190018) and parts (10006156/10046377/10095771).
Step 21
Attach the door panels to the frame using 4x screws (10004350) and part (130864).
Step 22
Attach 2x clips (10090880) to the inside of the cabinet frame for the doors.
Step 23
Attach 2x clips (10090880) to the inside of the cabinet frame for the doors.
Step 24
Attach 2x clips (10090880) to the inside of the cabinet frame for the doors.
Step 25
Insert 4x shelf supports into the desired positions inside the cabinet.
Step 26
Place the shelves onto the shelf supports.
Step 27
Adjust the feet at the base of the cabinet to ensure it is level. The diagram shows rotating the feet ⬆️⬇️.
Step 28
CRITICAL STEP: Wall Attachment. To prevent tip-over, this furniture MUST be secured to the wall using the provided wall attachment device(s) (114664). The diagram shows attaching a bracket to the wall and then to the cabinet. It also shows a warning symbol ❗ and a crossed-out symbol ❌ indicating the danger of tipping. Screws and plugs for the wall are NOT included and must be suitable for your wall type. Seek professional advice if unsure.
