KOLBJÖRN Cabinet Assembly Instructions
Safety First: Preventing Tip-Over
⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
This document provides assembly instructions for the KOLBJÖRN cabinet from IKEA.
Parts List
- 18x Screws (Part #10005716)
- 6x Nuts (Part #142661)
- 12x Screws (Part #144262)
- 4x Screws (Part #130864)
- 1x Screw (Part #190018)
- 4x Washers (Part #10005757)
- 4x Bolts (Part #10004350)
- 1x Bracket (Part #10006156)
- 2x Brackets (Part #114664)
- 1x Bracket (Part #10006155)
- 1x Allen Key (Part #100092)
- 6x Fasteners (Part #10090880)
- 4x Rods (Part #1003200)
- 8x Clips (Part #10005771)
Assembly Steps
- Step 1: Attach two side frame pieces to a base piece using 4x screws (Part #10005757).
- Step 2: Attach drawer runners to the side panels. Use 8x clips (Part #10005771).
- Step 3: Attach drawer runners to side panels.
- Step 4: Attach drawer runners to side panels.
- Step 5: Assemble drawer sides. Connect side panels using screws.
- Step 6: Assemble drawer sides. Connect side panels using screws.
- Step 7: Assemble drawer sides. Connect side panels using screws.
- Step 8: Attach drawer base panel.
- Step 9: Attach drawer front/back panels.
- Step 10: Attach drawer front/back panels.
- Step 11: Secure the drawer bottom panel using 6x screws (Part #10005716) and 6x nuts (Part #142661) with the Allen key (Part #100092).
- Step 12: Secure the drawer bottom panel using 10x screws (Part #10004350).
- Step 13: Attach drawer bottom panel.
- Step 14: Insert the assembled drawer into the cabinet frame.
- Step 15: Secure the second drawer bottom panel using 6x screws (Part #10005716) and 6x nuts (Part #142661) with the Allen key (Part #100092).
- Step 16: Attach door hinges to the cabinet frame. Use 10x clips (Part #10005771).
- Step 17: Attach door hinges to the cabinet frame. Use 6x screws (Part #100092) and 6x nuts (Part #10005716).
- Step 18: Attach door hinges to the cabinet frame. Use 6x screws (Part #142661).
- Step 19: Attach door hinges to the cabinet doors. Use 1x screw (Part #10006155) and 1x screw (Part #144262) for each door.
- Step 20: Attach door panels to the cabinet.
- Step 21: Attach door panels to the cabinet. Use 4x screws (Part #10004350) and 4x screws (Part #190018).
- Step 22: Attach door handles. Use 2x fasteners (Part #10090880) per handle.
- Step 23: Attach door handles. Use 2x fasteners (Part #10090880) per handle.
- Step 24: Attach door handles. Use 2x fasteners (Part #10090880) per handle.
- Step 25: Attach door handles. Use 4x fasteners (Part #10090880) per handle.
- Step 26: Insert shelves into the cabinet.
- Step 27: Adjust the leveling feet at the bottom of the cabinet for stability. The feet can be rotated to adjust height. [Adjustable feet symbol]
- Step 28: Final check. Ensure all parts are securely fastened. Re-attach the wall anchoring device to prevent tip-over. [Wall anchor symbol]