PAX Wardrobe Assembly Instructions

Important Safety Information

! WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Assembly Overview

This document provides instructions for assembling the IKEA PAX wardrobe. The assembly process involves attaching various components to the main frame and securing the unit to the wall. Ensure all parts are present and read all instructions before starting.

Assembly Steps

1. Two individuals lift and position the main wardrobe frame panels upright against a wall.

2. Various brackets and connectors are attached to the wardrobe frame. This involves inserting and securing these components as shown in the diagrams.

3. The assembly continues with attaching more components to the frame, preparing it for further structure and fittings.

4. Additional brackets and connectors are secured to the frame, ensuring structural integrity.

5. The process involves fitting specific brackets and components to the wardrobe frame, often with detailed close-ups showing correct insertion and securing methods.

6. The base of the wardrobe is assembled or secured, with arrows indicating vertical adjustment or attachment points.

7. The final assembly stages involve attaching components to the top, sides, and base of the wardrobe. Details show specific fittings being secured, some with depth limitations (e.g., max 22 mm or 7/8").

8. The wardrobe is shown with components attached, and a detail illustrates the correct insertion and securing of a bracket, potentially for door or shelf mechanisms.

9. The final components are fitted, with a diagram showing a part being inserted and locking into place with an audible "Click!".

10. The base of the wardrobe is shown, with an arrow indicating the insertion of a component into a designated slot.

11. The critical step of securing the wardrobe to the wall is illustrated. This involves drilling holes of 5 mm (3/16") diameter and attaching the provided wall brackets to the wall and the wardrobe using appropriate screws and plugs (not included).

Wall Attachment Instructions

To prevent furniture tip-over, it is essential to secure the wardrobe to the wall using the provided wall attachment devices. Use screws and plugs that are suitable for your wall type. If you are unsure, seek professional advice. The diagrams illustrate drilling 5 mm (3/16") holes and attaching the brackets securely.