IKEA PAX Wardrobe Assembly Instructions

Important Safety Information

WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

The Hebrew text translates to: "Warning! Furniture tipping over can cause serious or fatal bodily harm. To prevent the furniture from tipping over, it must be secured to the wall using the included fixing accessories. Screws for fixing are not included as they must be adapted to the material of the intended wall. For more information on suitable fixing screws, please consult a professional. Read and follow the detailed instructions carefully."

Tools and Parts Overview

The following tools are recommended for assembly: screwdrivers (Phillips and flathead), spirit level, hammer, measuring tape, pencil, ladder, drill, and clamps.

The included parts are: screws (various types and sizes), dowels, cam locks, cam bolts, shelf pins, brackets, and a wall mounting strap.

Parts List:

• 8x Screw (112996)
• 50x Nail (124593)
• 8x Cam Lock (113434)
• 12x Dowel (101375)
• 2x Screw (100402)
• 2x Screw (100644)
• 4x Screw (103693)
• 4x Screw (115345)
• 4x Screw (122972)
• 1x Wall Bracket (10077768)
• 2x IKEA Logo Panel
• 2x Wall Bracket
• 2x Clip
• 2x Bolt (110618)
• 2x Base Plate (110617)
• 2x Nut (100751)
• 1x Clip (105494)

Assembly Steps

1. Step 1: Attach brackets to the base panels using screws (100347).
2. Step 2: Insert bolts (112996) into the side panels and attach brackets.
3. Step 3: Secure the side panels to the base panels using bolts (112996).
4. Step 4: Insert dowels (101375) into the top and bottom panels and attach them to the side panels using cam locks (100751).
5. Step 5: Insert cam bolts (100751) into the side panels and secure with cam locks.
6. Step 6: Attach the top panel using bolts (110618).
7. Step 7: Insert bolts (110618) and secure with cam locks.
8. Step 8: Attach the back panel supports using screws (101375).
9. Step 9: Measure and mark the wall for mounting. Use a ladder to reach higher points. Ensure the wardrobe is positioned correctly before securing.
10. Step 10: Align the wardrobe with the wall and secure it using the provided wall attachment hardware. Ensure the height is between 237-240 cm (93 1/3 - 94 1/2").
11. Step 11: Continue securing the wardrobe to the wall, ensuring all connection points are firm.
12. Step 12: Insert cam locks (113434) and secure the top panel.
13. Step 13: Attach the side panels to the top and bottom panels.
14. Step 14: Slide the back panel into place.
15. Step 15: Secure the back panel with cam locks (113434).
16. Step 16: Attach the doors using the provided hinges and screws.
17. Step 17: Slide the doors onto the hinges.
18. Step 18: Secure the doors with screws (105494) and clips (124593).
19. Step 19: Attach the handles to the doors.
20. Step 20: Secure the top of the wardrobe to the wall using screws (103693) and wall plugs.
21. Step 21: Ensure the wardrobe is level using a spirit level and make any necessary adjustments.
22. Step 22: Attach the internal fittings, such as shelves and drawers, according to the diagrams. Use the provided clips and screws.
23. Step 23: Final check of all connections and stability.

Final Safety Check

Ensure the wardrobe is securely attached to the wall to prevent tipping. Double-check all screws and fittings are tightened. The maximum height for installation is 240 cm (94 1/2").