FUFU&GAGA KF020366-01 White Wood Wardrobe Armoire Assembly Instructions

Important Information & Safety Warnings

⚠️ IMPORTANT INFORMATION! Please read the entire manual before starting assembly and/or use. Follow the manual thoroughly and keep it for further reference.

? AVOID SCRATCHES! Assemble this furniture on a soft surface, such as a rug, to prevent scratching.

? IMPROVE EFFICIENCY! Consider finding a partner to assist with installation to speed up the process.

? ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping, ensure you use the wall attachment provided or purchase one suitable for your wall type. Seek professional advice if unsure. Read and follow each step carefully.

IMPORTANT! For any product assembled with screws, re-tighten screws 2 weeks after assembly and every 3 months thereafter to ensure stability throughout the product's lifespan.

Maintenance & Cleaning:

• Frame: Use a rag dipped in neutral detergent, wipe clean, and then dry with a clean rag.
• Glass materials: Wipe with a rag dampened with water glass cleaner, then dry with a dry rag.

Do not use an electric screwdriver or excessive force during installation, as the board is prone to breaking.

Tools Required

Please prepare the following tools:

• Screwdriver (not specified, assumed Phillips head)

Parts List

Confirm each screw corresponds to the manual. Similar shapes can be distinguished by size.

Assembly Instructions

Step 1: Prepare Plates

Insert quickfit screw (A) into plate 2 and 3. Fix part (G) to plate 2 and 3 with screw (F).

Step 2: Connect Plates

Connect plate 2 and 3 with plate 5. Insert cam lock (B) into plate 5 and turn clockwise to tighten.

Step 3: Attach Side Panel

Slide plate 4 along available grooves. Insert long wooden dowel (D) into plate 2 and 3. Attach plate 6 and fix with screw (E).

Step 4: Attach Top Panel

Insert quickfit screw (A) into plate 1. Fix part (S) to plate 1 with screw (F).

Step 5: Slide Panel

Slide plate 4 along available grooves.

Step 6: Connect Panels

Insert wooden dowel (C) into plate 2 and 3. Cover with plate 1. Insert cam lock (B) into plate 2, 3 and turn clockwise to tighten.

Step 7: Install Anti-tip Device

Fix anti-tipping device (N) to plate 1 with screw (F).

Step 8: Attach Screws to Plate 6

Insert quickfit screw (A) into plate 6.

Step 9: Attach Slide Rails

Fix slide rail (CL) and (CR) to plate 7 and 8 respectively with screw (H).

Step 10: Attach Screws to Plates 7 & 8

Insert quickfit screw (A) into plate 7 and 8.

Step 11: Assemble Drawer Components

Attach plate 5, 10, and 11 to plate 8. Insert cam lock (B) into plate 5, 10, 11 and turn clockwise to tighten.

Step 12: Slide Panel

Slide plate 9 along available grooves.

Step 13: Connect Main Frame

Attach plate 7 to plate 5, 10, and 11. Insert cam lock (B) into plate 5, 10, 11 and turn clockwise to tighten.

Step 14: Attach Screws to Plate 12

Insert quickfit screw (A) into plate 12.

Step 15: Assemble Drawer Box

Insert wooden dowel (C) into plate 12. Attach plate 12 to plate 7, 11, and 8. Put cam lock (B) into plate 7, 11, 8 and turn clockwise to tighten.

Step 16: Slide Panel

Slide plate 9 along grooves.

Step 17: Connect Components

Connect the two components. Put cam lock (B) into plate 7, 8 and turn clockwise to tighten. It is suggested that more than two people assemble this step.

Step 18: Attach Hinges and Handles

Fix hinge (J) to plate 13 and 14 with screw (H). Fix handle (L) to plate 13 and 14 with screw (K).

Step 19: Attach Doors

Attach door plate 13 to plate 2; door plate 14 to plate 3 by fixing hinge with screw (H).

Step 20: Install Clothing Rod

Place clothing rod (T) in.

Step 21: Attach Back Panels

Fix plate 16, 17, and 20 to plate 18 with screw (E).

Step 22: Insert Screws into Plate 15

Insert quickfit screw (A) into plate 15.

Step 23: Slide Panel

Slide plate 19 along grooves.

Step 24: Attach Drawer Component

Attach plate 15 to the drawer component. Turn cam lock (B) in plate 16, 20, 17 clockwise to tighten.

Step 25: Attach Handles

Fix handle (L) with screw (K).

Step 26: Attach Runners

Fix runner (DL) and (DR) to plate 16 and 17 respectively with screw (H).

Step 27: Install Back Buckles

Insert buckle (Q) into back slots, and fix with screw (P).

Step 28: Install Anti-Tipping Device

Install anti-tipping device as shown. Secure with screws (R) and (U) to the wall.

Step 29: Hinge Adjustment

More detailed hinge adjustment mode:

1. Rotate out the screws connected with the cabinet counterclockwise to adjust the gap between the overall door frame and the upper and lower sections. Rotate the screws clockwise after adjusting.
2. Rotate the screws at the end of the hinge counterclockwise to adjust the gap between the whole door frame and the cabinet before and after adjustment. Rotate the screws clockwise (do not over-rotate out).
3. Counterclockwise rotation of the screws in the middle of the hinge will offset the corresponding part of the rear door frame to the left. Clockwise rotation will offset it to the right.

Warranty Information

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or other functional issues. The warranty starts from the date of purchase, verified by proof of purchase.
• Before making a claim, contact customer service. Provide your purchase order number and details of the problem for replacement parts. Arrangements will be made within 48 hours. If out of stock, a shipping date will be provided.
• The product must be used in accordance with the provided instructions.
• For health reasons or other circumstances, if the furniture needs to be returned, it must be cleaned, dried, and returned within 30 days of receipt.

Type of Warranty Claim:

• Failure to follow furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is included.

Scope of Responsibility:

• The manufacturer shall not bear responsibility for misuse, user damage, or loss of parts during installation.
• Damage and scratches after use are not covered by the warranty.

The warranty applies to all purchases in the US and covers the following areas:

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns

CHANGED YOUR MIND AND NEED TO RETURN YOUR ITEM?

• If you have changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

• If your item is defective, contact customer service first.

DAMAGED ITEMS

• If you receive an order with obvious shipping damage, refuse delivery. If delivery is accepted and shipping damage is found, follow the retailer's specific instructions.
• In all circumstances, save all packaging material and paperwork. Disposing of packaging or attempting to return merchandise without contacting the fulfillment center may jeopardize your claim and credit.

After-Sales Contact

Email: adelahu@fufugaga.com

Phone: 208-820-0068