FUFU&GAGA Wardrobe Assembly Instructions
Important Information
Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES! In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.
IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment. If not included with this product, please purchase a wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
IMPORTANT! It is important that any product assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product. For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
Tools and Parts Identification
Tools Required: Screwdriver (not specified type, but implied Phillips head based on diagrams).
Hardware List:
- Screw A: 32 pcs, Ø 6 x 35 mm
- Screw B: 32 pcs, Ø 15 x 9 mm
- Screw C: 26 pcs, Ø 6 x 30 mm
- Screw D: 54 pcs, Ø 3.5 x 14 mm
- Screw E: 8 pcs, Ø 4 x 40 mm
- Screw F: 6 pcs, Ø 6 x 50 mm
- Screw G: 30 pcs, Ø 3 x 16 mm
- Screw H: 8 pcs, Ø 6 x 35 mm
- Screw I: 30 pcs, Ø 3.5 x 14 mm
- Screw J: 3 pcs, Ø 6 x 50 mm
- Part N: 2 pcs
- Part L: 2 pcs
- Part M: 3 pcs
- Part K: 6 pcs
- Part O: 2 pcs
When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.
Parts List: The wardrobe consists of the following numbered parts:
- 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 13, 17, 18, 19 (Panels/Plates)
- 6 (Clothing rod)
- 12 (x3) (Shelves/Dividers)
- 14 (Legs)
- 15 (Steel tubes)
- 16 (Support structure)
Assembly Instructions
Step 1
Screw quickfit screw(A) into corresponding holes in plate 2 and 3 with a screwdriver.
Step 2
Screw quickfit screw(A) into corresponding holes in plate 5. Flip the plate, and screw quickfit screw(A) into it as well.
Step 3
Screw quickfit screw(A) into corresponding holes in plate 1. Flip the plate, and fix part(N) with screw(L).
Step 4
Attach plates 9, 11, and 13 to plate 2 using wooden dowel(C). Insert cam lock(B) into holes in plates 9, 11, 13 and turn clockwise to tighten.
Step 5
Insert clothing rod 6 into holes in plate 2.
Step 6
Attach plate 5 to plates 9, 11, and 13 with long wooden dowel(J). Insert cam lock(B) into holes in plates 9, 11, 13 and turn clockwise to tighten.
Step 7
Attach plate 10 to plate 5. Insert cam lock(B) into holes in plate 10 and turn clockwise to tighten.
Step 8
Insert short wooden dowel(C) into plate 12 (x2). Attach plate 12 (x3) to plate 5. Insert cam lock(B) into holes in plate 12 and turn clockwise to tighten.
Step 9
Attach plate 3 to plate 10 and 12 (x3) with short wooden dowel(C). Insert cam lock(B) into holes in plate 10, 12 and turn clockwise to tighten.
Step 10
Cover plate 1 to plates 2, 9, 5, and 3 with wooden dowel(C). Insert cam lock(B) into holes in plates 2, 9, 5, 3 and turn clockwise to tighten.
Step 11
Slide back plates 7 and 8 into available grooves in plates 3, 5, 1, and 2.
Step 12
Attach plate 4 to plates 2, 5, and 3 with wooden dowel(C), then fix using screw(E).
Step 13
Connect steel tube 15 with part 16 using screw(F). Fix leg 14 to tube 15 using screw(F).
Step 14
Fix the base component to plate 4 using screw(H). Reinforce back plate using part(G) with screw(I).
Step 15
Fix hinge(K) to plate 17 and 19 respectively using screw(D). Fix hinge(M) to plate 18 using screw(D).
Step 16
Attach door plate 19 to plate 3 by fixing hinge with screw(D).
Step 17
Attach door plate 17 to plate 2; attach door plate 18 to plate 5 by fixing hinge with screw(D).
Step 18
Adjust hinge screws to make door alignment.
Step 19
Install anti-tipping device as shown.
Warranty
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, please call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer's instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn't work but you can't identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
- In all circumstances please save all packaging material and paperwork for the order.
- Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.
