KABOMBA LED Ceiling Lamp Assembly Instructions
Important Safety Information
⚠️ IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Installation in Bathrooms: The installation shall be carried out by an authorized electrical contractor. The luminaire must be permanently installed in the electric system and placed in the correct zone.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Parts Included
- 1x KABOMBA Luminaire Body
- 3x Screws (Part No. 10061375)
Installation Steps
-
Step 1: Mount the Bracket
Attach the mounting bracket to the ceiling using three screws (10061375). Ensure the screws and plugs are suitable for the mounting material, with a recommended depth of approximately 7 mm (9/32"). Avoid using incorrect fasteners [❌].
-
Step 2: Prepare Luminaire Wiring
The luminaire has an internal wire connector block ready for electrical connections.
-
Step 3: Position Luminaire
With assistance from another person, carefully position the luminaire body towards the mounted bracket.
-
Step 4: Connect Power Supply
Connect the main power supply wires to the luminaire's connector block: Neutral ([N]), Live ([L]), and Earth. Ensure correct connections.
-
Step 5: Secure Luminaire
Attach the luminaire to the mounting bracket. The diagram shows the luminaire being secured, possibly by snapping it into place or using retaining clips.
-
Step 6: Finalize Wiring
Complete the electrical connections within the luminaire's housing.
-
Step 7: Attach Luminaire Cover
Secure the main luminaire cover to the bracket using the three provided screws (10061375).
Light Source Replacement
The light source in this luminaire should only be replaced by the manufacturer, its authorized service agent, or a similarly qualified person.
