NYMÅNE

Assembly Instructions

Important Safety Information

IMPORTANT!

Always shut off power to the circuit before starting installation work.
In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.

Installation Steps

Step 1: Mount the Bracket

Attach the mounting bracket to the ceiling or wall using appropriate screws and wall plugs. Ensure the screws are suitable for the material of the mounting surface. (Diagram: Shows a person using a screwdriver to attach a bracket to a surface.)

Step 2: Prepare the Fixture and Cable

Feed the power cable through the designated opening in the fixture body. (Diagram: Shows a cable being inserted into the top of the fixture.)

Step 3: Connect Wiring to Terminal Block

Open the terminal block cover. Insert the power cable wires (live, neutral, and earth if applicable) into the correct terminals within the terminal block. Ensure secure connections. (Diagram: Shows wires being connected to a terminal block inside the fixture, with close-ups of the terminal connections labeled L (Line) and N (Neutral).)

Step 4: Secure the Fixture to the Bracket

Place the fixture onto the mounted bracket. Secure the fixture to the bracket using the provided screws. (Diagram: Shows the main body of the fixture being attached to the bracket with screws.)

Step 5: Final Connections and Securing

Ensure all wire connections are firm. Close the terminal block cover securely. The fixture should click into place, indicating it is properly secured. (Diagram: Shows a component being pushed into place until it clicks.)

Step 6: Bulb Replacement

When changing the bulb, use only GU10 LED bulbs. Do not use GU10 Halogen bulbs. (Diagrams: Illustrate the process of removing an old bulb and inserting a new GU10 LED bulb.)

Step 7: Adjusting the Fixture

The fixture can be adjusted to direct light. Rotate the adjustable parts to change the angle. (Diagrams: Show arrows indicating rotation for adjusting the fixture's direction.)

	KRANBALK Ceiling Lamp Assembly Instructions Official assembly instructions for the IKEA KRANBALK ceiling lamp. Learn how to safely install your new lighting fixture, including safety precautions and step-by-step guidance.
	SJÖMAKT Pendant Lamp Assembly Instructions Detailed assembly instructions for the IKEA SJÖMAKT pendant lamp, including safety precautions and step-by-step guidance for installation.
	FELSISK Pendant Lamp Assembly Instructions \| IKEA Step-by-step guide to assembling and installing the IKEA FELSISK pendant lamp. Includes safety precautions and component identification.
	KABOMBA LED Ceiling Lamp Assembly Instructions Step-by-step guide for assembling and installing the IKEA KABOMBA LED ceiling lamp, including important safety precautions and detailed instructions for mounting, wiring, and securing the light fixture.
	AKTERSPRING Pendant Lamp Assembly Instructions \| IKEA T2405 Step-by-step assembly instructions for the IKEA AKTERSPRING pendant lamp (T2405), including essential safety guidelines, parts list, and detailed visual descriptions for installation.
	SOLKLINT Ceiling Lamp Installation Guide \| IKEA Step-by-step instructions for assembling and installing the IKEA SOLKLINT ceiling lamp. Includes safety precautions and wiring guidance.
	IKEA KRUSNATE Track Light Installation Guide Comprehensive installation and usage guide for the IKEA KRUSNATE track light fixture, detailing safety precautions, step-by-step assembly, and bulb replacement instructions. Includes multilingual support.
	IKEA NYMÅNE Lamp: Assembly and Safety Guide Detailed assembly instructions and essential safety information for the IKEA NYMÅNE lamp, covering polarized plug safety, mounting, bulb replacement, and usage. Includes multilingual safety warnings.