KABOMBA

Important Safety Information

CAUTION: Before beginning installation, always turn off the main power supply at the circuit panel. ⚠️

WARNING: The light source in this product uses non-replaceable Light Emitting Diodes (LEDs). Do not attempt to disassemble the product, as direct exposure to the LEDs can cause eye damage. Do not immerse the product in water.

FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the user's authority to operate the equipment.

Tools and Preparation

Required Tools: [Phillips head screwdriver], [Flathead screwdriver].

Assembly Notes:

• Ensure parts are assembled correctly by following the visual guides.
• Avoid using excessive force, such as hammering, on product components. ❌ [Hammering wood]
• If you encounter difficulties, seek assistance from IKEA. [Person at IKEA]

Installation Steps

1. Step 1: Mount the Base Plate

   Secure the circular base plate to the ceiling using three screws (part number 10061375). Ensure the electrical wires are passed through the central opening of the base plate.

   Diagram Description: Shows attaching a circular mounting plate to the ceiling. Electrical wires are fed through the center. A close-up view illustrates screwing a screw (10061375) into the plate, with an indicator for correct screw insertion (✔️).

2. Step 2: Connect Wiring

   Connect the Live (Phase), Neutral, and Earth/Ground wires from your home's electrical supply to the corresponding wires on the lamp fixture. The fixture's wires are clearly marked.

   Diagram Description: Shows the lamp body being attached to the base plate. A close-up view details connecting the wires using screws (part 10061375).

3. Step 3: Secure the Lamp Body

   Attach the main lamp body to the previously mounted base plate. Confirm all electrical connections are secure and the lamp body is firmly attached.

   Diagram Description: Illustrates securing the main lamp body onto the base plate.

4. Step 4: Final Attachment

   With assistance from another person, align and attach the lamp fixture to the base plate. Secure the lamp using the provided screws (part number 10061375).

   Diagram Description: Two individuals are shown holding the lamp fixture to position it correctly. A close-up shows tightening screws (10061375) to secure the lamp.

Product Details & Distributor Information

Product Name: KABOMBA

Brand: IKEA

Distributor (Mexico): IKEA Supply Mexico, S.A. de C.V., Av. Paseo de las Palmas 275, Int. 403–404, Lomas de Chapultepec V sección, Miguel Hidalgo C.P.: 11000 Ciudad de México, México. Tel. 800-1-4532 69.

This product is intended for indoor use only. For detailed electrical specifications, please refer to the product's labeling.

© Inter IKEA Systems B.V. 2020