Resistex Balder CUB Installation Guide

Dimensions and Size

The fixture has the following dimensions:

• Width: 76 mm
• Height: 110 mm
• Depth: 40 mm
• Cable entry point diameter: 70 mm
• Mounting hole spacing: 85 mm

Safety Instructions

Important:

• ⚠️ Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• ⚡ Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• ? Do not use chemicals or abrasive products to clean the fixture.
• ?️ Keep these instructions for dismantling or future maintenance.
• For additional information about RESISTEX luminaires, visit: www.resistex-sa.com
• RESISTEX cannot be responsible for any misuse of the product.

Installation Steps

Follow these steps carefully for proper installation:

1. Step 1: Mount the base plate to the wall using four screws (x4).
2. Step 2: Feed the power cable through the cable entry into the fixture's base.
3. Step 3: Make electrical connections within the junction box, connecting live (L), neutral (N), and earth (PE) wires to the terminals.
4. Step 4: Secure the main fixture body to the mounting bracket.
5. Step 5: Attach the light diffuser to the fixture.
6. Step 6: Perform final tightening of any assembly screws.
7. Step 7: Connect the fixture's internal wiring to the corresponding terminals in the junction box.
8. Step 8: Close and secure the junction box cover.
9. Step 9: Slide the fixture onto the mounted bracket.
10. Step 10: Secure the fixture to the bracket from underneath using screws.
11. Step 11: Install the diffuser, ensuring it is properly seated.
12. Step 12: Complete the final assembly. Ensure the ON/OFF switch is in the OFF position before connecting the main power supply.

Note on Diagrams: The original PDF contains numbered diagrams illustrating each step. The descriptions above are textual representations of these visual instructions.

Certifications and Standards

This product complies with the following standards:

• RoHS Compliant
• CE Marked
• IP Rating: IP65
• IK Rating: IK07
• Angle: >80°
• Class I
• Norme Angle
• Norme Norme