Resistex Plafoled Installation Guide

Safety Instructions

Never work when voltage is present on the luminaire.

The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.

Risk of electrostatic discharges (ESD Norm). Handle with precautions.

Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

Do not use chemicals or abrasives products to clean the fixture.

Keep these instructions for dismantling or future maintenance.

Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.

RESISTEX cannot be responsible for any misuse of the product.

Dimensions and Size

The luminaire is available in circular and square forms, with specific dimensions provided for installation planning.

Circular Fixture Dimensions:

• Outer Diameter: 185 mm
• Inner Diameter: 129 mm
• Depth: 35 mm

Square Fixture Dimensions:

• Outer Dimensions: 185 mm x 185 mm
• Depth: 35 mm

Mounting bracket dimensions are also detailed in the original documentation for precise fitting.

Installation Steps

1. Step 1: Mount the bracket to the surface using screws (X2).
2. Step 2: Connect the electrical wires to the terminal block inside the fixture, ensuring correct polarity (L, N) and earth connection.
3. Step 3: Attach the fixture to the mounting bracket by hooking it onto the bracket.
4. Step 4: Connect the main power supply to the fixture's terminal block. The fixture includes an ON/OFF switch.
5. Step 5: Close the fixture, for example, by attaching a cover or diffuser.
6. Step 6: Position the fixture onto the mounting surface.
7. Step 7: Ensure power is supplied to the fixture, indicated by an ON/OFF switch.
8. Step 8: Secure the fixture to the mounting bracket.
9. Step 9: Mount the fixture securely to the surface.
10. Step 10: Make final electrical connections.
11. Step 11: Perform a final check of the installation.