Resistex Balder Luminaire

Dimensions and Size

The Balder luminaire has the following dimensions:

• Overall Length: 196 mm
• Cutout Length: 250 mm
• Overall Width: 45 mm
• Cutout Width: 45 mm
• Depth: 62 mm

Cable entry points are indicated.

Product Overview

The Resistex Balder is a lighting fixture designed to provide illumination. The product image shows a sleek, modern luminaire.

Installation Instructions

Safety Notes

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer, adhering to all relevant electrical standards and regulations.
• Be aware of the risk of electrostatic discharges (ESD Norm). Handle the product with necessary precautions.
• Please follow all notes and steps provided in the mounting instructions.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the luminaire.
• Retain these installation instructions for future dismantling or maintenance work.
• Additional information about RESISTEX luminaires can be found on the website: www.resistex-sa.com.
• RESISTEX is not responsible for any misuse of the product.

Mounting Steps

1. Step 1: Attach mounting brackets to the luminaire using 4x screws.

   Visual description: Brackets are shown being screwed onto the luminaire body.

2. Step 2: Position the luminaire.

   Visual description: An arrow indicates the direction of placement.

3. Step 3: Make electrical connections. The cable type specified is HO5RN-F / U-1000 R2V. Connections are shown for live, neutral, and earth wires.

   Visual description: Wires (blue, brown, green/yellow) are connected to terminals.

4. Step 4: Secure the luminaire. This step involves fixing the luminaire in place, likely to a mounting surface, using 4x screws.

   Visual description: Screws are shown being inserted to fix the luminaire.

5. Step 5: Observe the ON/OFF switch mechanism.

   Visual description: A diagram shows an ON/OFF switch.

6. Step 6: Slide or push the luminaire into its final position.

   Visual description: An arrow indicates sliding the luminaire into place.

7. Step 7: Further electrical connections may be shown, potentially for daisy-chaining or specific wiring configurations.

   Visual description: Wires are shown connected to terminals again.

8. Step 8: Final securing of the luminaire, possibly with 4x screws.

   Visual description: Final screws are shown being tightened.

9. Step 9: The luminaire is shown in the ON state.

   Visual description: The ON/OFF switch is depicted in the ON position.

Company Information and Certifications

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche, France

Tel: 04 93 276 276 - Fax: 04 93 276 280

Email: contact@resistex.com

APE: 2740Z - Siret: 487 593 477 00010 - SAS CAPITAL: 649979 € - TVA: F.R. 73 487 593 477

Website: www.resistex-sa.com

Certifications:

• ROHS
• CLASS I
• IP [Ingress Protection Rating - specific value not provided]
• IK [Impact Protection Rating - specific value not provided]
• CE