Resistex Stairled Installation Instructions
Model: Stairled
Version: V2.1-01.23
Safety and Maintenance
Safety Notes
- Never work when voltage is present on the luminaire.
- Installation must be performed by a professional installer in compliance with standards and regulations.
- Risk of electrostatic discharges (ESD Norm). Handle with precautions.
- Observe the notes and steps described in the mounting instructions.
Maintenance Instructions
- Do not use chemicals or abrasive products to clean the fixture.
- Keep these instructions for dismantling or future maintenance.
- Consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
- RESISTEX cannot be responsible for any misuse of the product.
Installation Steps
Step 1: Component Identification
The luminaire components are shown separated: the main body, the diffuser, and the mounting bracket.
Step 2: Mount the Bracket
Attach the mounting bracket (labeled 'A') to the ceiling using four [screw] fasteners (X4).
Step 3: Attach the Fixture Base
Secure the fixture base to the mounting bracket using four [screw] fasteners (X4).
Step 4: Wire Connections (Initial)
Connect the power supply wires to the internal terminal block. The diagram shows a wire being inserted into a connector. Terminal labels are N (Neutral), L (Live), and E (Earth).
Step 5: Install the Diffuser
Insert the diffuser into the main fixture body.
Step 6: Secure the Diffuser
Fasten the diffuser in place using two [screw] fasteners (X2).
Step 7: Terminal Block Overview
A close-up of the internal terminal block shows connections for N (Neutral), L (Live), and E (Earth).
Step 8: Connect Power Supply
Connect the main power supply wires to the terminal block, matching Neutral, Live, and Earth connections.
Step 9: Attach Decorative Trim
Place and secure the decorative ring or trim onto the fixture.
Step 10: Final Assembly Check
The diagram shows the completed fixture with the diffuser and trim correctly fitted.
Step 11: Completed Installation
The Stairled fixture is shown fully installed and mounted.