A3 PPPoE DHCP static IP settings

 It is suitable for: A3

Application introduction: Solution about how to configure multiple SSID for TOTOLINK products.

Solution about how to configure Internet mode with PPPoE ,Static IP and DHCP for TOTOLINK products

STEP-1: 

Connect your computer to the router by cable, enter http://192.168.0.1

5bd69a320af41.png

STEP-2.1:

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login.

5bd69a3cc4bf0.png

STEP-2.2:

Then click the Advance setup bottom

5bd69a87959e4.png

STEP-3.1.1: Easy Setup DHCP setting

Please go to Inernet Setup page, and check which you have selected. Selecting DHCP IP as Connection Type .Then Click Apply.

5bd69dca9a4be.png

STEP-3.1.2: Advanced Setup DHCP setting

Please go to Advance Setup ->Network ->Internet  Setup page, and check which you have selected .Then return to STEP-3.1.1.

5bd69fd8e1a73.png

STEP-3.2.1: Easy Setup PPPOE setting

Please go to Inernet Setup page, and check which you have selected. Selecting PPPoE as Connection Type .Then Click Apply.

5bd6a1c55c2ba.png

STEP-3.2.2: Advanced Setup PPPOE setting

Please go to Advance Setup ->Network ->Internet Setup page, and check which you have selected .Then return to STEP-3.2.1.

5bd6a203e8e76.png

STEP-3.3.1: Easy Setup Static IP setting

Please go to Inernet Setup page, and check which you have selected. Selecting Static IP as Connection Type .Then Click Apply.

5bd6a251972b1.png

STEP-3.3.2: Advanced Setup Static IP setting

Please go to Advance Setup ->Network ->Internet Setup page, and check which you have selected .Then return to STEP-3.3.1.

5bd6a2746b05c.png


DOWNLOAD

A3 PPPoE DHCP static IP settings – [Download PDF]

 


 

 

References

Leave a comment

Your email address will not be published. Required fields are marked *