EPS CSCSPR10-16D4 Ngalih Ganti
Spesifikasi
- Tipe: Changeover Switch (CSCSP)
- Stable Positions: 3 (O, 1, 2)
- Jinis Instalasi:
- Instalasi podo lan tingkat
- Instalasi Rear / Din Rail
- Panginstalan lumahing
- Rated Continuous Current:
- 10, 16, 20, 25, 32, 40, 63, 80, 100A
Pambuka
Ngalih Ganti
By means of manual operation, Changeover Switch (CSCSP) performs circuit switching and is mainly used as a switching device of two independent circuits – I & II. It provides three stable positions.
- Position Operation
- 0 Load is open-circuited
- 1 Load is connected to the normal supply
- 2 Load is connected to the second source of supply
Pemasangan Paralel & Level
Jinis Instalasi
- Instalasi podo lan tingkat
- Instalasi Rear / Din Rail
- Panginstalan lumahing
IEC / EN 60947
Ngalih Ganti
Bukak eksekusi Changeover Switch - CSCSPR 10 ~ 100A (Rear / Din Rail Instalasi)
| Diagram sirkuit | Rated arus kontinu Iu A |
Referensi |
Pole no.of main contact | Rated power of 3 ph. motor 50~60Hz |
| KW at 415V (AC23A) |
Saklar utama tanpa kontak tambahan
Bukak eksekusi Changeover Switch - CSCSPR 10 ~ 100A (Rear / Din Rail Instalasi)
CSCSPR10/16/20/25/32/40D3/
Cathetan: Kabeh dimensi ing mm.
FAQ
- P: Apa posisi stabil saka Switch Changeover?
- A: The Changeover Switch provides three stable positions: O (load open circuited), 1 (load connected to normal supply), and 2 (load connected to the second source of supply).
- P: Apa jinis sirkuit sing bisa digunakake kanggo Ganti Ganti?
- A: The Changeover Switch is mainly used as a switching device for two independent circuits – I & II.
Dokumen / Sumber Daya
 |
EPS CSCSPR10-16D4 Ngalih Ganti [pdf] Instruksi Manual CSCSPR10-16D4, CSCSPR20D4, CSCSPR25D4, CSCSPR32D4, CSCSPR40D4, CSCSPR63D4, CSCSPR80D4, CSCSPR100D4, CSCSPR10-16D4 Changeover Switch, 10CSD Switch, CSCSPR16,- |