EPS CSCSPR10-16D4 Changeover Switch
സ്പെസിഫിക്കേഷനുകൾ
- തരം: Changeover Switch (CSCSP)
- Stable Positions: 3 (O, 1, 2)
- ഇൻസ്റ്റലേഷൻ തരം:
- Parallel and level installation
- Rear / Din Rail installation
- ഉപരിതല ഇൻസ്റ്റാളേഷൻ
- Rated Continuous Current:
- 10, 16, 20, 25, 32, 40, 63, 80, 100A
ആമുഖം
മാറ്റൽ സ്വിച്ച്
By means of manual operation, Changeover Switch (CSCSP) performs circuit switching and is mainly used as a switching device of two independent circuits – I & II. It provides three stable positions.
- Position Operation
- 0 Load is open-circuited
- 1 Load is connected to the normal supply
- 2 Load is connected to the second source of supply
Parallel & Level installation
ഇൻസ്റ്റലേഷൻ തരം
- Parallel and level installation
- Rear / Din Rail installation
- ഉപരിതല ഇൻസ്റ്റാളേഷൻ
IEC / EN 60947
Changeover Switches
Open execution Changeover Switches – CSCSPR 10 ~ 100A (Rear / Din Rail Installation)
| സർക്യൂട്ട് ഡയഗ്രം | Rated continuous current Iu A |
റഫറൻസ് |
Pole no.of main contact | Rated power of 3 ph. motor 50~60Hz |
| KW at 415V (AC23A) |
Main switch without auxiliary contact
Open execution Changeover Switches – CSCSPR 10 ~ 100A (Rear / Din Rail Installation)
CSCSPR10/16/20/25/32/40D3/
കുറിപ്പ്: എല്ലാ അളവുകളും മില്ലീമീറ്ററിലാണ്.
പതിവുചോദ്യങ്ങൾ
- Q: What are the stable positions of the Changeover Switch?
- A: The Changeover Switch provides three stable positions: O (load open circuited), 1 (load connected to normal supply), and 2 (load connected to the second source of supply).
- Q: What type of circuits can the Changeover Switch be used for?
- A: The Changeover Switch is mainly used as a switching device for two independent circuits – I & II.
പ്രമാണങ്ങൾ / വിഭവങ്ങൾ
 |
EPS CSCSPR10-16D4 Changeover Switch [pdf] നിർദ്ദേശ മാനുവൽ CSCSPR10-16D4, CSCSPR20D4, CSCSPR25D4, CSCSPR32D4, CSCSPR40D4, CSCSPR63D4, CSCSPR80D4, CSCSPR100D4, CSCSPR10-16D4 Changeover Switch, CSCSPR10-16D4, Changeover Switch, Switch |