EPS CSCSPR10-16D4 Changeover Switch
Mga pagtutukoy
- Uri: Changeover Switch (CSCSP)
- Stable Positions: 3 (O, 1, 2)
- Uri ng Pag-install:
- Parallel at antas ng pag-install
- Pag-install ng Rear / Din Rail
- Pag-install sa ibabaw
- Na-rate na Patuloy na Kasalukuyan:
- 10, 16, 20, 25, 32, 40, 63, 80, 100A
Panimula
Changeover Switch
By means of manual operation, Changeover Switch (CSCSP) performs circuit switching and is mainly used as a switching device of two independent circuits – I & II. It provides three stable positions.
- Position Operation
- 0 Load is open-circuited
- 1 Load is connected to the normal supply
- 2 Load is connected to the second source of supply
Pag-install ng Parallel & Level
Uri ng Pag-install
- Parallel at antas ng pag-install
- Pag-install ng Rear / Din Rail
- Pag-install sa ibabaw
IEC / EN 60947
Changeover Switch
Buksan ang execution Changeover Switches – CSCSPR 10 ~ 100A (Pag-install ng Rear / Din Rail)
| Circuit Diagram | Rated tuloy-tuloy na kasalukuyang Iu A |
Sanggunian |
Pole no.of main contact | Rated power of 3 ph. motor 50~60Hz |
| KW at 415V (AC23A) |
Pangunahing switch na walang pantulong na contact
Buksan ang execution Changeover Switches – CSCSPR 10 ~ 100A (Pag-install ng Rear / Din Rail)
CSCSPR10/16/20/25/32/40D3/
Tandaan: Ang lahat ng mga sukat ay nasa mm.
FAQ
- Q: Ano ang mga matatag na posisyon ng Changeover Switch?
- A: The Changeover Switch provides three stable positions: O (load open circuited), 1 (load connected to normal supply), and 2 (load connected to the second source of supply).
- T: Anong uri ng mga circuit ang maaaring gamitin ng Changeover Switch?
- A: The Changeover Switch is mainly used as a switching device for two independent circuits – I & II.
Mga Dokumento / Mga Mapagkukunan
 |
EPS CSCSPR10-16D4 Changeover Switch [pdf] Manwal ng Pagtuturo CSCSPR10-16D4, CSCSPR20D4, CSCSPR25D4, CSCSPR32D4, CSCSPR40D4, CSCSPR63D4, CSCSPR80D4, CSCSPR100D4, CSCSPR10-16D4 Changeover Switch, 10CSD Switch, Switchover CSPR16,-4DXNUMX Changeover Switch |