Finder AFX00007 Arduino Configurable Analog Akwụkwọ ntuziaka onye nwe

Ajụjụ: Ọwa ole dị maka ntinye?
A: Enwere ngụkọta nke ọwa 8 dị maka ntinye, nke enwere ike ịhazi dabere na ọnọdụ akọwapụtara achọrọ.
Ajụjụ: Kedu asambodo ngwaahịa ahụ nwere
A: Ngwaahịa a kwadoro site na FCC, CE, UKCA, CUlus, na ENEC.

Arduino Opta® Analog Mgbasawanye

Akwụkwọ ntuziaka ngwaahịa
SKU: AFX00007

Nkọwa

Emebere Arduino Opta® Analog Expansions iji mụbaa ike Opta® micro PLC gị yana mgbakwunye nke ọwa 8 enwere ike ịhazi dị ka ntinye ma ọ bụ ihe nrụpụta maka ijikọ volta analog gị.tage. Emebere ya na mmekorita ya na onye nrụpụta Relay Finder®, ọ na-enye ndị ọkachamara ohere ịbawanye ụlọ ọrụ mmepụta ihe na ịrụ ọrụ akpaaka mgbe ha na-ewere advan.tage nke Arduino gburugburu ebe obibi.

Mpaghara ebumnuche:
Ụlọ ọrụ IoT, akpaaka ụlọ, njikwa ibu eletrik, akpaaka ụlọ ọrụ

Ngwa Examples

Emebere Arduino Opta® Analog Expansion maka njikwa ọkọlọtọ ụlọ ọrụ n'akụkụ Opta® micro PLC. A na-etinye ya ngwa ngwa n'ime ngwaike Arduino na gburugburu sọftụwia.

Ahịrị mmepụta akpaaka: Arduino Opta® nwere ike ijikwa oke ngwa ahịa na nrụpụta. Maka example, site na ijikọta a load cell ma ọ bụ usoro ọhụụ, ọ nwere ike hụ na a na-arụ ọrụ nke ọ bụla nke usoro nkwakọ ngwaahịa n'ụzọ ziri ezi, tụfuo akụkụ ndị na-adịghị mma na-akpaghị aka, hụ na ngwaahịa kwesịrị ekwesị dị n'ime igbe ọ bụla ma soro ndị na-ebi akwụkwọ na-emepụta ihe na-emekọ ihe, na-agbakwụnyekwa. ogeamp mekọrịta ozi site na Protocol Time Network (NTP).
Nleba anya n'ezie na nrụpụta: Enwere ike ịhụ data mmepụta na mpaghara site na HMI ma ọ bụ ọbụna site na ijikọ na Arduino Opta® site na Bluetooth® Low Energy. Ịdị mfe nke Arduino Cloud na-enye ohere igosipụta dashboards omenala; Ngwaahịa a dakọtara na ndị na-eweta igwe ojii ndị ọzọ.
Nchọpụta Anomaly Automated: Ike mgbakọ ya na-enye Arduino Opta® ohere ibuga igwe mmụta algọridim nke nwere ike ịmụta mgbe usoro na-esi na omume ya na-emebu na ahịrị mmepụta na ịgbalite / gbanyụọ usoro iji gbochie mmebi akụrụngwa.

Atụmatụ

Nkọwapụta izugbe gafereview

Njirimara	Nkọwa
Tụkwasịnụ Voltage	12…24V
Weghachite nchebe polarity	Ee
Nchedo ESP	Ee
Overvol na-agafe agafetage nchebe	Ee (ruo 40V)
Module Mgbasawanye akwadoro kacha	Ruo 5
Ọwa	8x: I1, I2, I3, I4, O1, I5, I6, O2
Ọrụ ọwa	I1 na I2: Ntinye mmemme (Voltage, Ugbu a, RTD2 wires, RTD3 wires), Mpụta mmemme (Voltage na ugbu a) - I3, I4, O1, I5, I6, O2: Ntinye mmemme (Vol).tage, Ugbu a, RTD2 wires), Mpụta mmemme (Voltage na ugbu a)
Ọkwa nke Nchekwa	IP20
Asambodo	FCC, CE, UKCA, CUlus, ENEC

Mara: Lelee ntinye na ntinye nkọwa nke ngalaba dị n'okpuru maka ozi ndị ọzọ gbasara iji ọwa Mgbasawanye Analog.

Ntinye

Njirimara	Nkọwa
Ọnụọgụ nke ọwa	8x
Enwere ike ịhazi ọwa dị ka ntinye	I1, I2, I3, I4, O1, I5, I6, O2
Ụdị ntinye anabatara	Digital Voltage na Analog (Voltage, ugbu a na RTD)
Ntinye gabiga ókètage nchebe	Ee
Nchekwa mgbochi	Mba
Mkpebi ntinye Analog	16 bit
Ọjụjụ mkpọtụ	Ọjụjụ mkpọtụ nhọrọ n'etiti 50 Hz na 60 Hz

Voltage Usoro ntinye
Enwere ike ịhazi ọwa ntinye mgbasawanye Analog maka sensọ dijitalụ ma ọ bụ sensọ analog 0-10V.

Njirimara	Nkọwa
Ntinye dijitalụ voltage	0…24V
Ọnụ ụzọ nwere ike ịgbanwe	Ee (maka ịkwado ọkwa mgbagha 0…10V)
Ntinye Analog voltage	0…10V
Ntinye Analog uru LSB	152.59 uV
Izi ezi	+/- 1%
Nkwagharị ugboro ugboro	+/- 1%
Ntinye mgbochi	Nkeji: 175 kΩ (mgbe etinyere resistor 200 kΩ)

Ụdị ntinye dị ugbu a
Enwere ike ịhazi ọwa ntinye mgbasawanye Analog maka ngwa loop dị ugbu a site na iji ọkọlọtọ 0/4-20 mA.

Njirimara	Nkọwa
Ntinye Analog dị ugbu a	0…25mA
Ntinye Analog uru LSB	381.5 nA
Oke sekit dị mkpụmkpụ	Nkeji: 25mA, Max 35mA (nwere ike mpụga).
Oke mmemme nwere ike ime ugbu a	0.5mA ruo 24.5mA (gbanyere akaghị aka)
Izi ezi	+/- 1%
Nkwagharị ugboro ugboro	+/- 1%

Ụdị ntinye RTD
Enwere ike iji ọwa ntinye Mgbasawanye Analog maka elele okpomọkụ na PT100 RTD.

Njirimara	Nkọwa
Ndenye nso	0…1 MΩ
Ajọ omume voltage	2.5 V

Enwere ike jikọọ wires 2 RTD na ọwa asatọ ahụ.

3 Njikọ RTD wires
RTD nwere waya 3 nwere n'ozuzu wires abụọ nwere otu agba.

Jikọọ waya abụọ nwere otu agba na - na ICx screw terminals n'otu n'otu.

Jikọọ waya na agba dị iche iche na + screw terminal.

Enwere ike tụọ wires 3 RTD naanị site na ọwa I1 na I2.

Nsonaazụ

Njirimara	Nkọwa
Ọnụọgụ nke ọwa	8x, (2x ejiri otu oge akwadoro)
Enwere ike ịhazi ọwa dị ka ntinye	I1, I2, I3, I4, O1, I5, I6, O2
Ụdị mmepụta akwadoro	Analog nke voltage na ugbua
Mkpebi DAC	13 bit
Ịkwụ ụgwọ mgbapụta maka efu voltage mmepụta	Ee

Enwere ike iji ọwa analọgụ asatọ niile dị ka mpụta mana n'ihi oke ike ịgbasa ike, a na-atụ aro ka ịnwe ọwa 2 ka edobere na mmepụta n'otu oge.
Na 25 Celsius C nke ọnọdụ okpomọkụ, a na-anwale ọwa 8 niile dị ka mmepụta n'otu oge na-emepụta ihe karịrị 24 mA na 10 V nke ọ bụla (> 0.24W kwa ọwa).

Voltage Mmepụta Mode
Ụdị mmepụta a na-enye gị ohere ijikwa voltagndị na-eme ihe na-eme ihe e-chụpụrụ.

Njirimara	Nkọwa
Analog mmepụta voltage	0…11V
Oke ibu na-eguzogide	500 Ω… 100 kΩ
Ibu capacitive kacha	2 μF
Mkpirisi okirikiri ugbu a kwa ọwa (isi mmalite)	Nkeji: 25 mA, Ụdị: 29 mA, Max: 32 mA (nkwụsị ala = 0 (ndabere)), Min: 5.5 mA, Ụdị: 7 mA, Max: 9 mA (oke njedebe = 1)
Mkpirisi okirikiri ugbu a kwa ọwa (ịmikpu)	Nkeji: 3.0 mA, Ụdị: 3.8 mA, Oke: 4.5 mA
Izi ezi	+/- 1%
Nkwagharị ugboro ugboro	+/- 1%

Ụdị mmepụta ugbu a
Ụdị mmepụta a na-enye gị ohere ijikwa ihe ndị na-arụ ọrụ ugbu a.

Njirimara	Nkọwa
Analọgụ mmepụta ugbu a	0…25mA
Oke mmepụta voltage mgbe ị na-enweta 25 mA	11.9V ± 20%
Mepee sekit voltage	16.9V ± 20%
Mmebi nke mmepụta	Nkeji: 1.5 MΩ, Ụdị: 4 MΩ
Izi ezi	1% na 0-10 mA nso, 2% na 10-24 mA nso
Nkwagharị ugboro ugboro	1% na 0-10 mA nso, 2% na 10-24 mA nso

Ọwa mmepụta PWM
Mgbasawanye Analog nwere ọwa mmepụta PWM anọ (P1… P4). Ha nwere ike ịhazigharị sọftụwia ma ka ha rụọ ọrụ ị ga-enyerịrị pin VPWM na volta chọrọtage.

VPWM Voltage	Nkọwa
Isi mmalite voltage kwadoro	8… 24 VDC
Oge	Enwere ike ime mmemme
okirikiri ọrụ	Enwere ike ime mmemme (0-100%)

Ọnọdụ LED
Mgbasawanye Analog na-egosipụta LEDs nke nwere ike ime onye ọrụ asatọ dị mma maka ịkọ ọkwa ọkwa n'ihu panel.

Nkọwa	Uru
Ọnụọgụ nke LED	8x

Ogo

Ọnọdụ ọrụ akwadoro

Nkọwa	Uru
Oke arụ ọrụ okpomọkụ	-20… 50 Celsius
Ogo ogo nchekwa	IP20
ogo mmetọ	2 kwekọrọ na IEC 61010

Nkọwapụta ike (okpomọkụ gburugburu)

Ngwongwo	Min	Ụdị	Oke	Nkeji
Tụkwasịnụ voltage	12	–	24	V
Oke ekwenyere	9.6	–	28.8	V
Oriri ike (12V)	1.5	–	–	W
Oriri ike (24V)	1.8	–	–	W

Ihe ndetu ndị ọzọ
A na-akpụkọta ọnụ ọnụ niile skru nke nwere “-” (akara mwepu) ọnụ. Enweghị ikewapụ galvanic n'etiti bọọdụ na ọkụ ọkụ DC ya.

Arụ ọrụ gafereview

Ngwaahịa View

Ihe	Njirimara
3a	Ọnụ na-enye ike 12…24 VDC
3b	P1…P4 PWM Mpụta
3c	Ọnọdụ Ọnọdụ Ike
3d	Ọnụ ihe ntinye/mmepụta Analog I1…I2 (Mpịakọtatage, Ugbu a, RTD 2 wires na RTD 3 wires)
3e	Ọnọdụ LEDs 1…8
3f	Port maka nkwurịta okwu na njikọ nke modul inyeaka
3g	Ọnụ ihe ntinye/mmepụta Analog I3…I6 (Mpịakọtatage, Ugbu a, RTD 2 wires)
3h	Ọnụ ihe ntinye/mmepụta Analog O1…O2 (Mpịakọtatage, Ugbu a, RTD 2 wires)

Ihe Ngosi
Eserese na-esonụ na-akọwa njikọ dị n'etiti ihe ndị bụ isi nke Opta® Analog Expansion:

Ọwa ntinye/mmepụta
Arduino Opta® Analog Expansion nwere ọwa 8 enwere ike ịhazi dị ka ntinye ma ọ bụ ntinye. Mgbe ahaziri ọwa ndị a dị ka ntinye, enwere ike iji ya dị ka dijitalụ nwere oke 0-24/0-10 V, ma ọ bụ analọgụ nwere ike tụọ vol.tage site na 0 ruo 10 V, tụọ ugbu a site na 0 ruo 25 mA ma ọ bụ ọnọdụ okpomọkụ na-akwado ọnọdụ RTD.
Enwere ike iji ọwa I1 na I2 jikọọ RTD 3-Wires. Enwere ike iji ọwa ọ bụla dị ka mmepụta, mara na iji ihe karịrị ọwa abụọ dịka mmepụta n'otu oge nwere ike ime ka ngwaọrụ ahụ kpoo ọkụ. Nke a ga-adabere na ọnọdụ okpomọkụ na ibu ọwa.
Anyị anwalela ịtọba ọwa asatọ niile dị ka ntinye na 25 Celsius C na-emepụta ihe karịrị 24 mA na 10 V nke ọ bụla n'oge obere oge.

Ịdọ aka ná ntị: Ọ bụrụ na onye ọrụ chọrọ nhazi ngbanwe site na nke a tụrụ aro, ọ ga-adị mkpa ịkwado arụmọrụ sistemụ yana nkwụsi ike tupu ebuga ya na gburugburu ebe nrụpụta.

Mwepụta PWM bụ ngwanrọ na-agbanwe agbanwe ma ka ha rụọ ọrụ, ị ga-enyerịrị pin VPWM na volta chọrọ.tage n'etiti 8 na 24 VDC, ị nwere ike ịtọ oge na okirikiri ọrụ site software.4.4 Mgbasawanye Port.
Enwere ike iji ọdụ ụgbọ mmiri mgbasawanye na daisy-chain ọtụtụ Mgbasawanye Opta® na modul ndị ọzọ. Iji nweta ya, ọ dị mkpa ka a tọhapụ ya na mkpuchi plastik ya nwere ike imebi, na nkwụnye njikọ kwesịrị ịgbakwunye n'etiti ngwaọrụ ọ bụla.
Ọ na-akwado ihe ruru modul mgbasawanye 5. Iji zere nsogbu nkwurịta okwu nwere ike, hụ na ọnụọgụ modul ejikọrọ anaghị agafe 5.
Ọ bụrụ na nsogbu ọ bụla mere na nchọpụta modul ma ọ bụ mgbanwe data, lelee njikọ ndị ahụ ugboro abụọ wee hụ na etinyere njikọ Aux na obere vidiyo n'ime ọdụ ụgbọ mmiri mgbasawanye. Ọ bụrụ na nsogbu na-aga n'ihu, lelee eriri ọ bụla tọgbọrọ chakoo ma ọ bụ ejikọrọ na-ezighi ezi.

Ngwa ngwaọrụ

Mmalite – IDE
Ọ bụrụ n’ịchọrọ itinye mmemme Arduino Opta® Analog Expansion mgbe ị na-anọghị, ịkwesịrị itinye Arduino® IDE Desktop [1] yana Arduino_Opta_Blueprint site na iji Njikwa Ọbá akwụkwọ. Iji jikọọ Arduino Opta® na kọmputa gị, ị ga-achọ eriri USB-C®.

Mmalite – Arduino Cloud Editor
Ngwa Arduino® niile na-arụ ọrụ na Arduino® Cloud Editor [2] site na ịwụnye ngwa mgbakwunye dị mfe.
A na-akwado Arduino® Cloud Editor na ntanetị, yabụ na ọ ga-adị ọhụrụ mgbe niile yana njirimara na nkwado maka bọọdụ na ngwaọrụ niile. Soro [3] ka ịmalite itinye koodu na ihe nchọgharị wee bulite ihe osise gị na ngwaọrụ gị.

Malite – Arduino PLC IDE
Enwere ike ịhazi Arduino Opta® Analog Expansion site na iji asụsụ mmemme IEC 61131-3 ụlọ ọrụ mmepụta ihe. Budata ngwa ngwa Arduino® PLC IDE [4], tinye Opta® Mgbasawanye site na Njikọ Aux wee jikọọ Arduino Opta® na kọmputa gị site na iji eriri USB-C® dị mfe ịmalite ịmepụta ihe ngwọta ụlọ ọrụ PLC nke gị. PLC IDE ga-amata mgbasawanye ma ga-ekpughere I/Os ọhụrụ dị na osisi akụrụngwa.

Mmalite – Arduino Cloud
A na-akwado ngwaahịa Arduino® IoT niile na Arduino Cloud nke na-enye gị ohere ịbanye, eserese na nyochaa data sensọ, kpalite ihe omume, wee rụzie ụlọ ma ọ bụ azụmahịa gị.

Sampna Sketches
SampEnwere ike ịhụ ihe osise maka Arduino Opta® Analog Expansions n'ọbá akwụkwọ Arduino_Opta_Blueprint "Ex.amples” na Arduino® IDE ma ọ bụ ngalaba “Arduino Opta® Documentation” nke Arduino® [5].

Ngwa ntanetị
Ugbu a na ị gafere isi ihe ị nwere ike iji ngwaọrụ ahụ mee, ị nwere ike ịchọpụta ohere na-adịghị agwụ agwụ ọ na-enye site na ịlele ọrụ na-akpali akpali na ProjectHub [6], Arduino® Library Reference [7] na ụlọ ahịa dị n'ịntanetị [8] ebe ị ga-enwe ike imeju ngwaahịa Arduino Opta® gị na mgbakwunye mgbakwunye, sensọ na ndị na-eme ihe.

Ozi igwe

Akụkụ ngwaahịa

Mara: Enwere ike iji ọdụ ụgbọ elu jiri waya isi siri ike yana nke nwere eriri (nkeji: 0.5 mm2/20 AWG).

Asambodo

Nchịkọta asambodo

Asambodo	Arduino Opta® Analog Mgbasawanye (AFX00007
CE (EU)	EN IEC 61326-1: 2021, EN IEC 61010 (LVD)
CB (EU)	Ee
WEEE (EU)	Ee
IHE (EU)	Ee
UKCA (UK)	EN IEC 61326-1: 2021
FCC (US)	Ee
CULU	UL 61010-2-201

Nkwupụta nke Nkwekọrịta CE DoC (EU)
Anyị na-ekwupụta n'okpuru ọrụ anyị naanị na ngwaahịa ndị dị n'elu kwekọrọ na ihe ndị dị mkpa nke ntuziaka EU na-esote ya mere tozuru oke maka mmegharị n'efu n'ime ahịa nke nwere European Union (EU) na European Economic Area (EEA).

Nkwupụta nke Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
bọọdụ Arduino kwekọrọ na RoHS 2 Directive 2011/65/EU nke European nzuko omeiwu na RoHS 3 Directive 2015/863/EU nke Council of 4 June 2015 na mmachi nke ojiji nke ụfọdụ ize ndụ ihe na ngwa eletriki na eletrọnịkị.

Ihe	Oke kacha (ppm)
Ndu (Pb)	1000
Ogwugwu (Cd)	100
Ebere (Hg)	1000
Chromium Hexavalent (Cr6+)	1000
Poly Brominated Biphenyls (PBB)	1000
Poly Brominated Diphenyl ethers (PBDE)	1000
Bis (2-Ethylhexyl) phthalate (DEHP)	1000
Benzyl butyl phthalate (BBP)	1000
Dibutyl phthalate (DBP)	1000
Diisobutyl phthalate (DIBP)	1000

Mwepu: Ọnweghị mpụ a na-ekwu.
Boards Arduino na-akwado nke ọma na ihe ndị metụtara European Union Regulation (EC) 1907/2006 gbasara ndebanye aha, nyocha, ikike na mmachi nke kemịkalụ (REACH). Anyị na-ekwupụta enweghị nke SVHC (https://echa.europa.eu/)web/ guest/candidate-list-table), Ndekọ Candidate nke ihe dị oke mkpa maka ikike nke ECHA wepụtara ugbu a, dị na ngwaahịa niile (yana ngwugwu) n'ọnụọgụ mkpokọta na ntinye nha ma ọ bụ karịa 0.1%. Dị ka ihe ọmụma anyị si mara, anyị na-ekwupụtakwa na ngwaahịa anyị enweghị ihe ọ bụla e depụtara na "Ndepụta ikike" (Annex XIV nke ụkpụrụ REACH) na ihe gbasara nchegbu dị oke elu (SVHC) n'ụdị ọ bụla dị mkpa dị ka akọwapụtara. site na Mgbakwunye XVII nke ndepụta Candidate bipụtara EHA (European Chemical Agency) 1907/2006/EC.

Nkwupụta mineral esemokwu
Dị ka onye na-eweta ihe elektrọnik na eletriki eletrik zuru ụwa ọnụ, Arduino maara ọrụ anyị na-ahụ maka iwu na ụkpụrụ gbasara Mineral Conflict, kpọmkwem Dodd-Frank Wall Street Reform and Consumer Protection Act, Nkebi 1502. Arduino anaghị ebute ma ọ bụ hazie esemokwu ozugbo. mineral dị ka Tin, Tantalum, Tungsten, ma ọ bụ ọla edo. Ngwakọta mineral ndị na-ese okwu dị n'ime ngwaahịa anyị n'ụdị ihe na-ere ahịa, ma ọ bụ dị ka akụrụngwa na alloys ọla. Dịka akụkụ nke mbọ anyị kwesịrị ekwesị Arduino akpọtụrụla ndị na-ebubata akụrụngwa n'ime ụdọ ọkọnọ anyị iji chọpụta na ha nọgidere na-agbaso ụkpụrụ ahụ. Dabere na ozi enwetara ugbu a, anyị na-ekwupụta na ngwaahịa anyị nwere Mineral Conflict sitere na mpaghara enweghị nsogbu.

FCC ịkpachara anya

Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ

Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.

Rịba ama: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị A, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya pụọ na nnyonye anya na-emerụ emerụ mgbe ejiri akụrụngwa na mpaghara azụmahịa. Akụrụngwa a na-ewepụta, na-eji, ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Ịrụ ngwá ọrụ a n'ime ebe obibi nwere ike ịkpata nnyonye anya na-emerụ ahụ nke a ga-achọ ka onye ọrụ dozie nnyonye anya n'onwe ya.

Ozi ụlọ ọrụ

Aha Ụlọ Ọrụ	Arduino Srl
Adreesị ụlọ ọrụ	Site na Andrea Appiani, 25 – 20900 MONZA (Ịtali)

Akwụkwọ ntụaka

Ref	Njikọ
Arduino IDE (Desktọpụ)	https://www.arduino.cc/en/Main/Software
Arduino IDE (igwe ojii)	https://create.arduino.cc/editor
Arduino Cloud – Mmalite	https://docs.arduino.cc/arduino-cloud/getting-started/iot-cloud-getting-started
Arduino PLC IDE	https://www.arduino.cc/en/Main/Software
Akwụkwọ Arduino Opta®	https://docs.arduino.cc/hardware/opta
Hub Project	https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending
Ntụaka ụlọ akwụkwọ	https://www.arduino.cc/reference/en/
Ụlọ ahịa dị n'ịntanetị	https://store.arduino.cc/

Akụkọ ngbanwe

Ụbọchị	Ndozigharị	Mgbanwe
24/09/2024	4	Mmelite ọdụ ụgbọ mmiri gbasaa
03/09/2024	3	Cloud Editor emelitere site na Web Onye nchịkọta akụkọ
05/07/2024	2	Emelitere eserese ngọngọ
25/07/2024	1	Mwepụta mbụ

Akwụkwọ / akụrụngwa

nchoputa AFX00007 Arduino Configurable Analog [pdf] Akwụkwọ ntuziaka onye nwe
AFX00007 Arduino Configurable Analog, AFX00007, Arduino Configurable Analog, Configurable Analog, Analog

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

nchoputa AFX00007 Arduino Configurable Analog

Ozi ngwaahịa

Ntuziaka ojiji ngwaahịa