finder AFX00007 Arduino Configurable Analog Owner phau ntawv

Inputs Configuration
Analog Expansion input channels txhawb ntau hom xws li Voltage Hom Kev Tawm Tsam, Hom Kev Tawm Tsam Tam Sim No, thiab RTD Cov Lus Qhia Tawm.

Voltage Hom Hom
Configure input channels rau digital sensors los yog 0-10 V analog sensors.

Digital Input Voltage: 0-24V
Configurable Threshold: Yog (rau kev txhawb nqa 0-10 V logic qib)

Analog tswv yim Voltage: 0-10V
Analog Input LSB Tus Nqi: 152.59 uV

Qhov tseeb: +/- 1%
Rov ua dua: +/- 1%

Input Impedance: Min 175 k (thaum sab hauv 200 k resistor qhib)

Tam sim no input hom
Configure cov input channel rau tam sim no voj ntsuas siv 0/4-20 mA tus qauv.

Analog input tam sim no: 0-25 mA
Analog Input LSB Tus Nqi: 381.5 nA

Kev txwv luv luv tam sim no: Min 25 mA, Max 35 mA (sab nraud powered)
Programmable Tam sim no txwv: 0.5 mA txog 24.5 mA

Qhov tseeb: +/- 1%
Rov ua dua: +/- 1%

RTD Input Hom
Siv cov kev tawm tswv yim rau kev ntsuas kub nrog PT100 RTDs.

Input Range: 0-1 M

Zais Voltagib: 2.5v

Cov lus nug nquag nug (FAQ)

Q: Muaj pes tsawg channel muaj rau cov tswv yim?
A: Muaj tag nrho ntawm 8 txoj hauv kev muaj rau cov khoom siv, uas tuaj yeem teeb tsa raws li hom tshwj xeeb xav tau.
Q: Cov khoom muaj ntawv pov thawj dab tsi
A: Cov khoom tau lees paub los ntawm FCC, CE, UKCA, cULus, thiab ENEC.

Arduino Opta® Analog nthuav dav

Khoom Siv Taw Qhia
SKU: AFX00007

Kev piav qhia

Arduino Opta® Analog Expansions yog tsim los ua kom koj qhov Opta® micro PLC muaj peev xwm nrog qhov sib ntxiv ntawm 8 channels uas tuaj yeem ua haujlwm raws li cov khoom siv lossis cov khoom siv txuas rau koj cov analog vol.tage, tam sim no, resistive kub sensors los yog actuators ntxiv rau 4x siab PWM outputs. Tsim los ntawm kev koom tes nrog cov thawj coj relay chaw tsim tshuaj paus Finder®, nws tso cai rau cov kws tshaj lij los ntsuas kev lag luam thiab tsim cov haujlwm automation thaum noj advantage ntawm Arduino ecosystem.

Lub hom phiaj cheeb tsam:
Kev lag luam IoT, Lub tsev automation, Hluav taws xob thauj khoom tswj, Muaj automation

Daim ntawv thov Examples

Lub Arduino Opta® Analog Expansion yog tsim los rau kev lag luam txheej txheem tshuab tswj nrog Opta® micro PLC. Nws tau nkag mus rau hauv Arduino hardware thiab software ecosystem.

Automated Production Line: Arduino Opta® tuaj yeem tswj hwm tag nrho cov khoom ntws hauv kev tsim khoom. Rau example, los ntawm kev sib koom ua ke ntawm lub xov tooj ntawm tes lossis lub zeem muag, nws tuaj yeem ua kom txhua theem ntawm cov txheej txheem ntim tau ua tiav, cia li muab pov tseg qhov tsis raug, xyuas kom cov khoom tsim nyog muaj nyob hauv txhua lub thawv thiab cuam tshuam nrog cov tshuab luam ntawv ntau lawm, kuj ntxiv sijhawm ntxiv.amp cov ntaub ntawv synchronized ntawm Network Time Protocol (NTP).
Kev soj ntsuam lub sijhawm tiag tiag hauv Kev Tsim Khoom: Cov ntaub ntawv ntau lawm tuaj yeem pom hauv zos ntawm HMI lossis txawm tias los ntawm kev txuas mus rau Arduino Opta® ntawm Bluetooth® Tsawg Zog. Qhov yooj yim ntawm Arduino Huab tso cai rau remotely tso saib kev cai dashboards; cov khoom no kuj sib xws nrog lwm cov chaw muab kev pabcuam huab loj.
Automated Anomaly Detection: Nws lub tshuab xam zauv tso cai rau Arduino Opta® los siv Machine Learning algorithms uas muaj peev xwm kawm tau thaum tus txheej txheem yog drifting los ntawm nws tus cwj pwm li ib txwm ntawm cov kab ntau lawm thiab ua kom / deactivating txheej txheem los tiv thaiv cov khoom puas.

Nta

General Specifications Tshajview

Yam ntxwv	Paub meej
Muab Voltage	12… 24 V
Rov qab polarity tiv thaiv	Yog lawm
ESP tiv thaiv	Yog lawm
Transient overvoltage kev tiv thaiv	Yog (mus txog 40V)
Kev txhawb nqa siab tshaj plaws nthuav dav	Mus txog 5
Cov channel	8x: I1, I2, I3, I4, O1, I5, I6, O2
Channels functionality	I1 thiab I2: Programmable inputs (Voltage, Tam sim no, RTD2 xov hlau, RTD3 xov hlau), Programmable outputs (Voltage thiab tam sim no) - I3, I4, O1, I5, I6, O2: Programmable inputs (Voltage, Tam sim no, RTD2 xov hlau), Programmable outputs (Voltage thiab tam sim no)
Qib Kev Tiv Thaiv	IP20
Daim ntawv pov thawj	FCC, CE, UKCA, cULus, ENEC

Nco tseg: Tshawb xyuas cov khoom siv thiab cov khoom tawm cov ncauj lus kom ntxaws hauv qab no kom paub ntau ntxiv txog kev siv Analog Expansion channels.

Cov tswv yim

Yam ntxwv	Paub meej
Tus naj npawb ntawm cov channel	8x
Channels programmable li inputs	I1, I2, I3, I4, O1, I5, I6, O2
Hom kev nkag tau txais	Digital Voltage thiab Analog (Voltage, Tam sim no thiab RTD)
Inputs overvoltage kev tiv thaiv	Yog lawm
Antipolarity tiv thaiv	Tsis muaj
Analog Input daws teeb meem	16bit ib
Suab nrov tsis kam	Kev xaiv lub suab nrov ntawm 50 Hz thiab 60 Hz

Voltage Hom Hom
Analog Expansion input channels tuaj yeem teeb tsa rau digital sensors lossis 0-10 V analog sensors.

Yam ntxwv	Paub meej
Digital input voltage	0… 24 V
Configurable pib	Yog (rau kev txhawb nqa 0… 10 V logic qib)
Analog tswv yim voltage	0… 10 V
Analog input LSB tus nqi	152.59 ua
Qhov tseeb	+/- 1%
Rov ua dua	+/- 1%
Input impedance	Min: 175 kΩ (thaum sab hauv 200 kΩ resistor qhib)

Tam sim no input hom
Analog Expansion input channels tuaj yeem teeb tsa rau kev ntsuas ntsuas tam sim no siv tus qauv 0/4-20 mA.

Yam ntxwv	Paub meej
Analog input tam sim no	0… 25 mA
Analog input LSB tus nqi	381.5n ua
luv luv Circuit Court tam sim no txwv	Min: 25 mA, Max 35 mA (sab nraud powered).
Programmable tam sim no txwv	0.5mA txog 24.5mA (lub voj voog fais fab)
Qhov tseeb	+/- 1%
Rov ua dua	+/- 1%

RTD Input Hom
Analog Expansion input channels tuaj yeem siv rau kev ntsuas kub nrog PT100 RTDs.

Yam ntxwv	Paub meej
Input range	0–1 MΩ
Zam txim voltage	2.5 V

2 xov hlau RTDs tuaj yeem txuas rau ib qho ntawm yim kab.

3 Hlau RTD Kev Sib Txuas
RTD nrog 3 xov hlau feem ntau muaj ob lub xov hlau nrog tib xim.

Txuas ob lub xov hlau nrog tib xim rau - thiab ICx ntsia hlau terminals feem.

Txuas cov hlau nrog cov xim sib txawv rau lub + ntsia hlau davhlau ya nyob twg.

3 xov hlau RTD tsuas yog ntsuas los ntawm cov channel I1 thiab I2.

Cov zis

Yam ntxwv	Paub meej
Tus naj npawb ntawm cov channel	8x, (2x siv ib txhij pom zoo)
Channels programmable li outputs	I1, I2, I3, I4, O1, I5, I6, O2
Hom kev tso zis txhawb	Analog voltage thiab tam sim no
DAC daws teeb meem	13bit ib
Charge twj rau xoom voltage cov zis	Yog lawm

Tag nrho yim analog channels tuaj yeem siv los ua cov khoom tawm tab sis vim muaj kev txwv tsis pub muaj hluav taws xob, nws raug nquahu kom muaj txog li 2 txoj kev teeb tsa ntawm cov zis tib lub sijhawm.
Ntawm 25 ° C ntawm ambient kub, tag nrho cov 8 raws li cov zis tau sim nyob rau tib lub sij hawm thaum outputting ntau tshaj 24 mA ntawm 10 V txhua (> 0.24W ib channel).

Voltage Cov zis hom
Hom tso zis no cia koj tswj voltage-tsav actuators.

Yam ntxwv	Paub meej
Analog tso zis voltage	0… 11 V
Resistive load ntau	500 Ω… 100 kΩ
Maximum capacitive load	2f ua
Short-circuit tam sim no ib channel (sourcing)	Min: 25 mA, Hom: 29 mA, Max: 32 mA (qis txwv me ntsis = 0 (default)), Min: 5.5 mA, Hom: 7 mA, Max: 9 mA (qis txwv me ntsis = 1)
Short-circuit tam sim no ib channel (sinking)	Min: 3.0 mA, Hom: 3.8 mA, Max: 4.5 mA
Qhov tseeb	+/- 1%
Rov ua dua	+/- 1%

Tam sim no tso zis hom
Hom tso zis no tso cai rau koj tswj cov actuators uas tau tsav tam sim no.

Yam ntxwv	Paub meej
Analog tso zis tam sim no	0… 25 mA
Tso zis ntau tshaj voltage thaum muab 25 mA	11.9V ± 20%
Qhib Circuit Voltage	16.9V ± 20%
Cov zis impedance	Min: 1.5 MΩ, Hom: 4 MΩ
Qhov tseeb	1% hauv 0-10 mA ntau, 2% hauv 10-24 mA ntau yam
Rov ua dua	1% hauv 0-10 mA ntau, 2% hauv 10-24 mA ntau yam

PWM Output Channels
Analog Expansion muaj plaub PWM tso zis raws (P1…P4). Lawv yog software configurable thiab rau lawv ua hauj lwm koj yuav tsum muab tus VPWM tus pin nrog rau qhov xav tau vol.tage.

VPWM Voltage	Paub meej
Tau qhov twg los voltage txhawb	8 ... 24 VDC
Lub sijhawm	Programmable
Lub luag haujlwm-lub voj voog	Programmable (0-100%)

Cov xwm txheej LED
Lub Analog Expansion nta yim tus neeg siv-programmable LEDs zoo tagnrho rau cov xwm txheej qhia hauv pem hauv ntej vaj huam sib luag.

Kev piav qhia	Tus nqi
Tus naj npawb ntawm LEDs	8x

Kev ntsuas

Pom zoo rau kev ua haujlwm

Kev piav qhia	Tus nqi
Kev Ua Haujlwm Kub Ntau	-20 ... 50 ° C.
Kev tiv thaiv qib ntsuas	IP20
Pollution degree	2 Ua raws li IEC 61010

Fais fab Specification (Ambient Temperature)

Khoom	Min	Ntaus	Max	Chav tsev
Muab voltage	12	–	24	V
Tso cai ntau yam	9.6	–	28.8	V
Kev siv hluav taws xob (12V)	1.5	–	–	W
Kev siv hluav taws xob (24V)	1.8	–	–	W

Sau ntawv ntxiv
Tag nrho cov ntsia hlau terminals cim nrog "-" (muab kos npe) yog luv ua ke. Tsis muaj kev sib cais ntawm galvanic ntawm lub rooj tsavxwm thiab nws cov DC fais fab mov.

Muaj nuj nqi Tshajview

Khoom View

Yam khoom	Feature
3a	Fais fab mov Terminals 12…24 VDC
3b	P1…P4 PWM Outputs
3c	Fais fab xwm txheej LED
3d	Analog Input/Output Terminals I1…I2 (Voltage, Tam sim no, RTD 2 xov hlau thiab RTD 3 xov hlau)
3e	Cov xwm txheej LEDs 1…8
3f	Chaw nres nkoj rau kev sib txuas lus thiab kev sib txuas ntawm auxiliary modules
3g	Analog Input/Output Terminals I3…I6 (Voltage, Tam sim no, RTD 2 xov hlau)
3h	Analog Input/Output Terminals O1…O2 (Voltage, Tam sim no, RTD 2 xov hlau)

Thaiv tau Diagram
Cov duab hauv qab no piav qhia txog kev sib raug zoo ntawm cov khoom tseem ceeb ntawm Opta® Analog Expansion:

Input/Output Channels
Lub Arduino Opta® Analog Expansion nta 8 raws uas tuaj yeem tsim kho raws li cov khoom siv lossis cov khoom tawm. Thaum cov channel tau teeb tsa raws li cov khoom siv, lawv tuaj yeem siv los ua cov digital nrog 0-24 / 0-10 V ntau, lossis analog tau ntsuas vol.tage los ntawm 0 txog 10 V, ntsuas tam sim no ntawm 0 mus rau 25 mA lossis kub leveraging RTD hom.
Cov channel I1 thiab I2 tuaj yeem siv los txuas 3-Wires RTDs. Txhua lub channel tuaj yeem siv los ua cov khoom tso tawm, nco ntsoov tias siv ntau tshaj ob txoj kev raws li cov khoom tso tawm ib txhij tuaj yeem ua kom sov lub cuab yeej. Qhov no yuav nyob ntawm qhov kub thiab txias thiab channel load.
Peb tau sim teeb tsa tag nrho yim raws li qhov tso tawm ntawm 25 ° C tso tawm ntau tshaj 24 mA ntawm 10 V txhua lub sijhawm ib ntus.

Ceeb toom: Yog tias tus neeg siv xav tau kev teeb tsa nrog qhov sib txawv ntawm qhov tau hais tseg, yuav tsum tau lees paub qhov kev ua tau zoo thiab kev ruaj ntseg ua ntej xa mus rau qhov chaw tsim khoom.

PWM outputs yog software configurable thiab rau lawv ua hauj lwm koj yuav tsum muab tus VPWM tus pin nrog rau qhov xav tau vol.tage ntawm 8 thiab 24 VDC, koj tuaj yeem teeb lub sijhawm thiab lub luag haujlwm-khiav los ntawm software.4.4 Expansion Port
Qhov chaw nres nkoj nthuav dav tuaj yeem siv rau daisy-chain ob peb Opta® Expansions thiab ntxiv modules. Txhawm rau nkag mus rau nws, nws yuav tsum tau tso tawm los ntawm nws lub hau yas tawg, thiab qhov txuas txuas yuav tsum tau ntxiv ntawm txhua lub cuab yeej.
Nws txhawb nqa txog li 5 expansion modules. Txhawm rau kom tsis txhob muaj teeb meem kev sib txuas lus, xyuas kom tag nrho cov xov tooj txuas nrog tsis pub dhau 5.
Yog tias muaj teeb meem tshwm sim nrog kev kuaj xyuas module lossis cov ntaub ntawv sib pauv, muab ob npaug rau-xyuas cov kev sib txuas thiab xyuas kom meej tias Aux connector thiab clips tau ruaj ntseg ntsia hauv qhov chaw nres nkoj nthuav dav. Yog tias muaj teeb meem tshwm sim, tshuaj xyuas cov hlua khi xoob lossis tsis raug.

Kev ua haujlwm ntaus ntawv

Pib Pib - IDE
Yog tias koj xav ua haujlwm rau koj lub Arduino Opta® Analog Expansion thaum lub sijhawm koj yuav tsum tau nruab Arduino® Desktop IDE [1] thiab Arduino_Opta_Blueprint siv Tus Thawj Saib Xyuas Tsev Qiv Ntawv. Txhawm rau txuas Arduino Opta® rau koj lub computer, koj yuav xav tau USB-C® cable.

Pib Pib - Arduino Cloud Editor
Txhua Arduino® cov cuab yeej ua haujlwm tawm ntawm lub thawv ntawm Arduino® Cloud Editor [2] los ntawm kev txhim kho ib qho yooj yim plugin.
Lub Arduino® Cloud Editor yog tuav hauv online, yog li nws yuav tsum tau hloov kho tshiab nrog cov yam ntxwv tshiab thiab txhawb nqa txhua lub rooj tsav xwm thiab cov khoom siv. Ua raws li [3] pib coding ntawm browser thiab upload koj cov duab kos rau hauv koj lub cuab yeej.

Pib Pib - Arduino PLC IDE
Arduino Opta® Analog Expansion kuj tseem tuaj yeem ua haujlwm siv cov txheej txheem kev lag luam IEC 61131-3 programming lus. Rub tawm Arduino® PLC IDE [4] software, txuas Opta® Expansion los ntawm Aux Connector thiab txuas koj Arduino Opta® rau koj lub computer siv USB-C® cable yooj yim los pib tsim koj tus kheej PLC kev daws teeb meem. PLC IDE yuav lees paub qhov nthuav dav thiab yuav nthuav tawm cov I/Os tshiab uas muaj nyob rau hauv cov khoom siv ntoo.

Pib Pib - Arduino Huab
Tag nrho Arduino® IoT cov khoom siv tau txais kev txhawb nqa ntawm Arduino Cloud uas tso cai rau koj teev, teeb tsa thiab txheeb xyuas cov ntaub ntawv sensor, ua rau muaj xwm txheej, thiab ua kom koj lub tsev lossis kev lag luam.

Sampua Sketch
Sample sketches rau Arduino Opta® Analog Expansions tuaj yeem pom hauv Arduino_Opta_Blueprint tsev qiv ntawv “Examples” hauv Arduino® IDE lossis “Arduino Opta® Cov Ntaub Ntawv” ntu ntawm Arduino® [5].

Cov peev txheej online
Tam sim no koj tau dhau los ntawm cov hauv paus ntawm qhov koj tuaj yeem ua tau nrog lub cuab yeej, koj tuaj yeem tshawb nrhiav qhov tsis muaj qhov kawg uas nws muab los ntawm kev tshuaj xyuas cov haujlwm zoo siab ntawm ProjectHub [6], Arduino® Library Reference [7] thiab lub khw hauv online [8] qhov twg koj yuav tuaj yeem ntxiv koj cov khoom siv Arduino Opta® nrog ntxiv txuas ntxiv, sensors thiab actuators.

Cov ntaub ntawv siv tshuab

Khoom Dimensions

Nco tseg: Terminals tuaj yeem siv nrog ob qho tib si khoom thiab stranded core hlau (min: 0.5 mm2 / 20 AWG).

Cov ntawv pov thawj

Daim ntawv pov thawj Summary

Cert	Arduino Opta® Analog Expansion (AFX00007
CE (EU)	EN IEC 61326-1: 2021, EN IEC 61010 (LVD)
CB (EU)	Yog lawm
WEEE (EU)	Yog lawm
REACH (EU)	Yog lawm
UKCA (UA)	TS EN IEC 61326-1: 2021
FCC (USA)	Yog lawm
cULus	UL 61010-2-201

Kev Tshaj Tawm Txog Kev Ua Raws Cai CE DoC (EU)
Peb tshaj tawm raws li peb lub luag haujlwm ib leeg tias cov khoom lag luam saum toj no tau ua raws li cov cai tseem ceeb ntawm EU Cov Lus Qhia hauv qab no thiab yog li tsim nyog rau kev txav mus los dawb hauv kev lag luam suav nrog European Union (EU) thiab European Economic Area (EEA).

Tshaj Tawm Txog Kev Ua Raws Li EU RoHS & REACH 211 01/19/2021
Arduino boards tau ua raws li RoHS 2 Directive 2011/65 / EU ntawm European Parliament thiab RoHS 3 Cov Lus Qhia 2015/863 / EU ntawm Pawg Sab Laj ntawm 4 Lub Rau Hli 2015 ntawm kev txwv tsis pub siv qee yam khoom siv phom sij hauv cov khoom siv hluav taws xob thiab hluav taws xob.

Tshuaj	Qhov siab tshaj plaws (ppm)
Lead (Pb) Hmoob.	1000
Cadmium (Cd)	100
Mercury (Hg)	1000
Hexavalent Chromium (Cr6+)	1000
Tom ntej: Poly Brominated Biphenyls (PBB)	1000
Poly Brominated Diphenyl ethers (PBDE)	1000
Bis (2-Ethylhexyl) phthalate (DEHP)	1000
Tom ntej: Benzyl Butyl Phthalate (BBP)	1000
Dibutyl phthalate (DBP)	1000
Diisobutyl phthalate (DIBP)	1000

Kev zam: Tsis muaj kev zam.
Arduino Boards tau ua raws li tag nrho cov kev cai ntawm European Union Regulation (EC) 1907 / 2006 hais txog Kev Sau Npe, Kev Ntsuam Xyuas, Kev Tso Cai thiab Kev Txwv Cov Tshuaj (REACH). Peb tshaj tawm tsis muaj SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Cov Neeg Sib Tw Cov Ntawv Teev Npe ntawm Cov Khoom Muaj Kev Nyuaj Siab Heev rau kev tso cai tam sim no tso tawm los ntawm ECHA, muaj nyob rau hauv tag nrho cov khoom (thiab kuj pob) nyob rau hauv ntau npaum li cas nyob rau hauv ib tug concentration sib npaug zos los yog siab tshaj 0.1%. Rau qhov zoo tshaj plaws ntawm peb txoj kev paub, peb kuj tshaj tawm tias peb cov khoom tsis muaj ib yam ntawm cov khoom muaj npe nyob rau hauv "Tsev Ntawv Tso Cai" (Annex XIV ntawm REACH cov cai) thiab Cov Khoom Muaj Kev Txaus Siab Siab (SVHC) hauv ib qho tseem ceeb npaum li qhov tau hais tseg. los ntawm Annex XVII ntawm Cov Neeg Sib Tw Cov Npe Tshaj Tawm los ntawm ECHA (European Chemical Agency) 1907/2006/EC.

Kev tsis sib haum xeeb Minerals tshaj tawm
Raws li lub ntiaj teb kev lag luam ntawm cov khoom siv hluav taws xob thiab hluav taws xob, Arduino paub txog peb lub luag haujlwm ntsig txog kev cai lij choj thiab cov cai hais txog kev tsis sib haum xeeb Minerals, tshwj xeeb yog Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. Arduino tsis ncaj qha los yog txheej txheem teeb meem. minerals xws li Tin, Tantalum, Tungsten, los yog kub. Cov khoom tsis sib haum xeeb muaj nyob rau hauv peb cov khoom nyob rau hauv daim ntawv ntawm solder, los yog raws li ib feem ntawm cov hlau alloys. Raws li ib feem ntawm peb qhov kev mob siab rau qhov tsim nyog Arduino tau hu rau cov neeg muag khoom nyob rau hauv peb cov saw hlau los xyuas lawv cov kev ua raws li cov cai txuas ntxiv. Raws li cov ntaub ntawv tau txais los txog tam sim no peb tshaj tawm tias peb cov khoom muaj cov khoom tsis sib haum xeeb los ntawm cov chaw tsis sib haum xeeb.

FCC ceev faj

Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm tog neeg lub luag haujlwm rau kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:

Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam

Cov cuab yeej no yuav tsum lees txais kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau tsis muaj kev ua haujlwm.

Nco tseg: Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class A cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo thaum cov cuab yeej ua haujlwm hauv ib puag ncig kev lag luam. Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis ntsia thiab siv raws li phau ntawv qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Kev ua haujlwm ntawm cov khoom siv no hauv thaj chaw nyob yuav ua rau muaj kev cuam tshuam tsis zoo uas tus neeg siv yuav tsum tau kho qhov cuam tshuam ntawm nws tus kheej cov nuj nqis.

Cov ntaub ntawv tuam txhab

Lub tuam txhab npe	Arduino Srl
Chaw Nyob	Ntawm Andrea Appiani, 25 - 20900 MONZA (Italy)

Cov ntaub ntawv siv

Ref	Txuas
Arduino IDE (Desktop)	https://www.arduino.cc/en/Main/Software
Arduino IDE (Huab)	https://create.arduino.cc/editor
Arduino Huab - Pib	https://docs.arduino.cc/arduino-cloud/getting-started/iot-cloud-getting-started
Arduino PLC IDE	https://www.arduino.cc/en/Main/Software
Cov ntaub ntawv Arduino Opta®	https://docs.arduino.cc/hardware/opta
Qhov project Hub	https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending
Library Reference	https://www.arduino.cc/reference/en/
Khw Online	https://store.arduino.cc/

Kev kho keeb kwm

Hnub tim	Kev kho dua	Hloov
24/09/2024	4	Expansion chaw nres nkoj hloov tshiab
03/09/2024	3	Cloud Editor hloov kho los ntawm Web Editor
05/07/2024	2	Block Diagram hloov tshiab
25/07/2024	1	Thawj Tso

Cov ntaub ntawv / Cov ntaub ntawv

Nrhiav AFX00007 Arduino Configurable Analog [ua pdf] Tus tswv phau ntawv
AFX00007 Arduino Configurable Analog, AFX00007, Arduino Configurable Analog, Configurable Analog, Analog

Cov ntaub ntawv

Cov neeg siv phau ntawv

Nrhiav AFX00007 Arduino Configurable Analog

Cov ntaub ntawv khoom

Cov lus qhia siv khoom