se fumaneng AFX00007 Arduino Configurable Analog
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Phepelo VoltagE: 12-24 V
- Tšireletso ea Reverse Polarity: E
- Tšireletso ea ESP: E
- Transient Overvoltage Tšireletso: Ho fihla ho 40 V
- Li-Modules tsa Katoloso e Felletseng: Ho fihla ho 5
- Tekanyo ea Tšireletso: IP20
- Setifikeiti: FCC, CE, UKCA, culus, ENEC
Litaelo tsa Tšebeliso ea Sehlahisoa
Tlhophiso ea lintho tse kenang
Mecha ea kenyelletso ea Katoloso ea Analog e tšehetsa mekhoa e fapaneng ho kenyelletsa Voltage Mokhoa oa ho Kena, Mokhoa oa Hona Joale oa ho Kena, le Mokhoa oa ho Kena oa RTD.
Moqtage Mokhoa oa ho Kena
Lokisa likanale tse kenang bakeng sa li-sensor tsa dijithale kapa li-analog tsa 0-10 V.
- Digital Input VoltagE: 0-24 V
- Configurable Threshold: E (bakeng sa ho tšehetsa boemo ba 0-10 V)
- Analog Input VoltagE: 0-10 V
- Boleng ba Analog Input LSB: 152.59 uV
- Ho nepahala: +/- 1%
- Pheta-pheta: +/- 1%
- Tšitiso ea ho Kena: Min 175 k (ha sehanyetsi sa kahare sa 200k se lumelletsoe)
Mokhoa oa Hona Joale oa ho Kena
Hlophisa mecha ea ho kenya bakeng sa lisebelisoa tsa hona joale tsa loop u sebelisa 0/4-20 mA standard.
- Kenyelletso ea Analoge ea Hona Joale: 0-25 mA
- Boleng ba Analog Input LSB: 381.5 nA
- Moedi wa Hona Jwale wa Potoloho: Min 25 mA, Max 35 mA (e sebetsa ka ntle)
- Tekanyetso ea Hona Joale e Reriloeng: 0.5 mA ho isa ho 24.5 mA (loop e tsamaisoa)
- Ho nepahala: +/- 1%
- Pheta-pheta: +/- 1%
Mokhoa oa ho Kena oa RTD
Sebelisa likanale tse kentsoeng bakeng sa ho lekanya mocheso ka PT100 RTDs.
- Mefuta e Kenyellelitsoeng: 0-1 M
- Leeme Voltage: 2.5V
Lipotso tse atisang ho botsoa (FAQ)
- P: Ke likanale tse kae tse teng bakeng sa ho kenya letsoho?
A: Ho na le kakaretso ea liteishene tse 8 tse fumanehang bakeng sa lisebelisoa, tse ka hlophisoang ho latela mokhoa o itseng o hlokahalang. - P: Sehlahisoa se na le litifikeiti life
A: Sehlahisoa se netefalitsoe ke FCC, CE, UKCA, culus, le ENEC.
Katoloso ea Analog ea Arduino Opta®
Sehlahisoa Reference Manual
SKU: AFX00007
Tlhaloso
Katoloso ea Analog ea Arduino Opta® e etselitsoe ho atisa bokhoni ba hau ba Opta® micro PLC ka kenyelletso ea liteishene tse 8 tse ka hlophisoang e le lintho tse kenang kapa tse hlahisoang bakeng sa ho hokela molumo oa analog ea hau.tage, hona joale, li-sensor tsa mocheso tse hanyetsanang kapa li-activator ho phaella ho 4x e inehetseng ea PWM e hlahisoang. E entsoe ka tšebelisano 'moho le moetsi ea ka sehloohong oa li-relay Finder®, e lumella litsebi ho holisa merero ea liindasteri le ea ho aha ha li ntse li tsoela pele.tage ea Arduino ecosystem.
Libaka tse Lebeletsoeng:
IoT ea indasteri, Boiketsetso ba Moaho, Tsamaiso ea meroalo ea Motlakase, Boiketsetso ba indasteri
Kopo Examples
Katoloso ea Arduino Opta® Analog e etselitsoe taolo ea mochini o tloaelehileng oa indasteri haufi le Opta® micro PLC. E kopantsoe habonolo ho Hardware ea Arduino le software ecosystem.
- Automated Production Line: Arduino Opta® e khona ho laola phallo e akaretsang ea thepa tlhahisong. Bakeng sa mohlalaample, ka ho kopanya sele ea mojaro kapa sistimi ea pono, e ka etsa bonnete ba hore mohato o mong le o mong oa ts'ebetso ea ho paka o etsoa ka nepo, o lahla likarolo tse fosahetseng ka bohona, o netefatsa hore thepa e lekaneng e teng ka har'a lebokose le leng le le leng mme e sebelisana le bahatisi ba line ea tlhahiso, hape e eketsa linakoamp tlhahisoleseding e hokahantsweng ka Network Time Protocol (NTP).
- Tlhokomelo ea Nako ea 'Nete ho Tlhahiso: Lintlha tsa tlhahiso li ka bonoa sebakeng sa heno ka HMI kapa esita le ka ho hokahanya le Arduino Opta® ka Bluetooth® Low Energy. Bonolo ba Arduino Cloud bo lumella ho bonts'a li-dashboards tse tloaelehileng hole; sehlahisoa sena se boetse se lumellana le bafani ba bang ba ka sehloohong ba Cloud.
- Tlhahlobo e Ikemetseng ea Anomaly: Matla a eona a komporo a lumella Arduino Opta® ho sebelisa li-algorithms tsa ho Ithuta tsa Mochini tse khonang ho ithuta ha ts'ebetso e ntse e hoholeha ho tloha boitšoarong ba eona bo tloaelehileng moleng oa tlhahiso le lits'ebetso tsa ho kenya tšebetsong / ho koala ho thibela tšenyo ea lisebelisoa.
Likaroloana
Litlhaloso Kakaretso Fetaview
| Litšobotsi | Lintlha |
| Phepelo Voltage | 12…24 V |
| Tšireletso e khutlisetsang morao polarity | Ee |
| Tšireletso ea ESP | Ee |
| Ho feta ha nakoanatage tshireletso | Ho joalo (ho fihla ho 40 V) |
| Li-Modules tsa Katoloso tse Tšehetsoeng ka ho Fetisisa | Ho fihlela ho 5 |
| Likanale | 8x: I1, I2, I3, I4, O1, I5, I6, O2 |
|
Mesebetsi ea likanale |
I1 le I2: Lisebelisoa tse ka khonehang (Moqtage, Lithapo tsa hajoale, tsa RTD2, lithapo tsa RTD3), Liphetho tse ka lokisoang (Moqtage le ea hona joale) - I3, I4, O1, I5, I6, O2: Lisebelisoa tse ka khonehang (Moqolotage, Lithapo tsa Hona joale, tsa RTD2), Liphetho tse ka lokisoang (Moqtage le ea hajoale) |
| Tekanyo ea Tšireletso | IP20 |
| Setifikeiti | FCC, CE, UKCA, culus, ENEC |
Hlokomela: Sheba lintlha tse kenang le tse hlahisoang ka tlase bakeng sa tlhaiso-leseling e batsi mabapi le tšebeliso ea liteishene tsa Katoloso ea Analog.
Lintho tse kenang
| Litšobotsi | Lintlha |
| Palo ea likanale | 8x |
| Mananeo a ka lokisetsoang ho kenya letsoho | I1, I2, I3, I4, O1, I5, I6, O2 |
| Mofuta oa lintho tse kenang tse amoheloang | Digital Voltage le Analog (Moqtage, Hona joale le RTD) |
| Lintho tse kenang li feteletsetage tshireletso | Ee |
| Tšireletso ea Antipolarity | Che |
| Qeto ea ho kenya Analog | 16 hanyane |
| Ho hana Lerata | Ha u khetha ho hana lerata lipakeng tsa 50 Hz le 60 Hz |
Moqtage Mokhoa oa ho Kena
Liteishene tsa ho kenyelletsa katoloso ea Analog li ka hlophisoa bakeng sa li-sensor tsa dijithale kapa li-analog tsa 0-10 V.
| Litšobotsi | Lintlha |
| Digital input voltage | 0…24 V |
| Moeli o hlophisitsoeng | E (bakeng sa ho tšehetsa 0…10 V boemo ba kelello) |
| Analog input voltage | 0…10 V |
| Boleng ba LSB ea analog | 152.59 UV |
| Ho nepahala | +/- 1% |
| Pheta-pheta | +/- 1% |
| Kenyelletso ea ho kenya | Min: 175 kΩ (ha mohanyetsi oa ka hare oa 200 kΩ o noetsoe) |
Mokhoa oa Hona Joale oa ho Kena
Liteishene tsa ho kenyelletsa katoloso ea Analog li ka hlophisoa bakeng sa lisebelisoa tsa hajoale tsa loop ho sebelisa maemo a 0/4-20 mA.
| Litšobotsi | Lintlha |
| Analog ea hajoale | 0…25 mA |
| Boleng ba LSB ea analog | 381.5 nA |
| Moeli o mokhutšoanyane oa potoloho ea hona joale | Min: 25 mA, Max 35 mA (e sebetsa ka ntle). |
| Moeli oa hajoale o ka reroang | 0.5 mA ho isa ho 24.5 mA (loop e tsamaisoa) |
| Ho nepahala | +/- 1% |
| Pheta-pheta | +/- 1% |
Mokhoa oa ho Kena oa RTD
Likanale tsa ho kenya Analog li ka sebelisoa bakeng sa metering ea mocheso ka PT100 RTDs.
| Litšobotsi | Lintlha |
| Input mefuta e fapaneng | 0…1 MΩ |
| Leeme voltage | 2.5 V |
Lithapo tse 2 tsa RTD li ka hokeloa ho efe kapa efe ea likanale tse robeli.
Khokelo ea 3 ea likhoele tsa RTD
RTD e nang le lithapo tse 3 hangata e na le lithapo tse peli tse nang le 'mala o tšoanang.
- Hokela lithapo tse peli ka 'mala o tšoanang ho li-terminals tsa ICx le ICx ka ho latellana.
- Hokela terata ka 'mala o fapaneng ho + screw terminal.
3 lithapo RTD e ka lekanngoa feela ka likanale I1 le I2.
Litholoana
| Litšobotsi | Lintlha |
| Palo ea likanale | 8x, (2x e sebelisitsoe ka nako e le 'ngoe e khothalelitsoe) |
| Mananeo a ka hlophisehang joalo ka liphetho | I1, I2, I3, I4, O1, I5, I6, O2 |
| Mofuta oa lihlahisoa o tšehetsoeng | Analoge voltage le hona joale |
| Qeto ea DAC | 13 hanyane |
| Pompo ea ho tjhaja bakeng sa voltagtlhahiso | Ee |
Likanale tse robeli tsa analoge li ka sebelisoa e le liphetho empa ka lebaka la mefokolo ea ho felloa ke matla, ho khothaletsoa hore ho be le likanale tse fihlang ho tse 2 tse behiloeng tlhahiso ka nako e le 'ngoe.
Ka 25 ° C ea mocheso o potolohileng, likanale tsohle tse 8 tse behiloeng e le liphetho li lekoa ka nako e le 'ngoe ha li ntse li hlahisa ho feta 24 mA ho 10 V e' ngoe (> 0.24W ka mocha).
Moqtage Output Mode
Mokhoa ona oa tlhahiso o u lumella ho laola voltagli-actuator tse tsamaisoang ke elektronike.
| Litšobotsi | Lintlha |
| Analoge output voltage | 0…11 V |
| Mefuta e fapaneng ea meroalo | 500 Ω…100 kΩ |
| Boholo ba capacitive load | 2 μF |
| Nako e khuts'oane ea potoloho ka mocha ka mong (ho fumana) | Min: 25 mA, Mofuta: 29 mA, Max: 32 mA (moeli o tlase hanyane = 0 (default)), Min: 5.5 mA, Mofuta: 7 mA, Max: 9 mA (moeli o tlase hanyane = 1) |
| Nako e khuts'oane ea nako e khuts'oane ka kanale (ho teba) | Min: 3.0 mA, Mofuta: 3.8 mA, Max: 4.5 mA |
| Ho nepahala | +/- 1% |
| Pheta-pheta | +/- 1% |
Mokhoa oa hona joale oa Output
Mokhoa ona oa tlhahiso o u lumella ho laola li-actuator tse tsamaisoang hajoale.
| Litšobotsi | Lintlha |
| Analogue e hlahisoang hona joale | 0…25 mA |
| Boholo ba tlhahiso ea voltage ha u batla 25 mA | 11.9 V ± 20% |
| Potoloho e bulehileng voltage | 16.9 V ± 20% |
| Boiphetetso ba sephetho | Min: 1.5 MΩ, Mofuta: 4 MΩ |
| Ho nepahala | 1% ho 0-10 mA range, 2% ho 10-24 mA range |
| Pheta-pheta | 1% ho 0-10 mA range, 2% ho 10-24 mA range |
Likanale tse hlahisoang ke PWM
Katoloso ea Analog e na le likanale tse 'ne tsa tlhahiso ea PWM (P1…P4). Ke software e ka lokisoang 'me hore li sebetse u tlameha ho fana ka phini ea VPWM ka molumo o lakatsehang.tage.
| VPWM Moqtage | Lintlha |
| Mohloli oa voltage tšehelitsoe | 8… 24 VDC |
| Nako | E ka reroang |
| Mosebetsi-potoloho | E ka reroa (0-100%) |
Maemo a li-LED
Katoloso ea Analog e na le li-LED tse robeli tse ka sebelisoang ke basebelisi tse loketseng ho tlaleha maemo ka phanele e ka pele.
| Tlhaloso | Boleng |
| Palo ea li-LED | 8x |
Lintlha
Maemo a Tšebetso a khothalelitsoeng
| Tlhaloso | Boleng |
| Mocheso sebetsa Range | -20…50 °C |
| Tekanyetso ea degree ea ts'ireletso | IP20 |
| Tekanyo ea tšilafalo | 2 e lumellana le IEC 61010 |
Tlhaloso ea Matla (Ambient Temperature)
| Thepa | Min | Tlanya | Max | Yuniti |
| Phepelo voltage | 12 | – | 24 | V |
| Sebaka se lumelletsoeng | 9.6 | – | 28.8 | V |
| Tšebeliso ea matla (12V) | 1.5 | – | – | W |
| Tšebeliso ea matla (24V) | 1.8 | – | – | W |
Lintlha Tse Eketsehileng
Li-screw terminals tse tšoailoeng ka “-” (letšoao la ho tlosa) li khutsufalitsoe hammoho. Ha ho na karohano ea galvanic lipakeng tsa boto le matla a eona a DC.
E sebetsa hapeview
Sehlahisoa View
| Ntho | Sebopeho |
| 3a | Lisebelisoa tsa Phepelo ea Matla 12…24 VDC |
| 3b | P1…P4 Liphetho tsa PWM |
| 3c | Boemo ba Matla LED |
| 3d | Lisebelisoa tsa Analog / Output I1…I2 (Moqtage, Lithapo tsa hajoale, tsa RTD 2 le lithapo tsa RTD 3) |
| 3e | Maemo a LED 1…8 |
| 3f | Port bakeng sa puisano le khokahanyo ea li-module tse thusang |
| 3g | Lisebelisoa tsa Analog / Output I3…I6 (Moqtage, Hona joale, RTD 2 lithapo) |
| 3h | Lisebelisoa tsa Analog / Output O1…O2 (Moqtage, Hona joale, RTD 2 lithapo) |
Setšoantšo se Thibeloang
Setšoantšo se latelang se hlalosa kamano pakeng tsa likarolo tsa mantlha tsa Katoloso ea Analog ea Opta®:
Mecha ea ho kenya / e hlahisoang
Katoloso ea Analog ea Arduino Opta® e na le liteishene tse 8 tse ka hlophisoang joalo ka lintho tse kenang kapa tse hlahisoang. Ha liteishene li hlophisitsoe e le lisebelisoa li ka sebelisoa e le tsa dijithale tse nang le mefuta e fapaneng ea 0-24/0-10 V, kapa analoge e khona ho lekanya vol.tagho tloha ho 0 ho isa ho 10 V, lekanya hajoale ho tloha ho 0 ho isa ho 25 mA kapa mocheso o sebelisang mokhoa oa RTD.
Liteishene tsa I1 le I2 li ka sebelisoa ho hokahanya li-RTD tsa 3-Wires. Mocha o mong le o mong o ka sebelisoa hape joalo ka tlhahiso, hlokomela hore ho sebelisa likanale tse fetang tse peli joalo ka tlhahiso ka nako e le 'ngoe ho ka chesa sesebelisoa. Sena se tla itšetleha ka mocheso oa tikoloho le mojaro oa mocha.
Re lekile ho beha liteishene tsohle tse robeli e le liphetho ho 25 °C tse hlahisang ho feta 24 mA ho 10 V e 'ngoe le e' ngoe ka nako e lekanyelitsoeng.
Tlhokomeliso: Haeba mosebelisi a hloka tlhophiso e fapaneng le e khothaletsoang, o tla hloka ho netefatsa ts'ebetso ea sistimi le botsitso pele a romelloa tikolohong ea tlhahiso.
Liphetho tsa PWM ke software e ka lokisoang, 'me hore li sebetse u tlameha ho fana ka phini ea VPWM ka molumo o lakatsehang.tage pakeng tsa 8 le 24 VDC, o ka seta nako le duty-cycle ka software.4.4 Expansion Port
Boema-kepe ba ho atolosoa bo ka sebelisoa ho kopanya likhakanyo tse 'maloa tsa Opta® le li-module tse ling. Ho e fihlella, e hloka ho lokolloa sekoahelong sa eona sa polasetiki se robehang, 'me plug ea khokahano e hloka ho eketsoa lipakeng tsa sesebelisoa ka seng.
E ts'ehetsa ho fihla ho li-module tse 5 tsa katoloso. Ho qoba mathata a ka bang teng a puisano, etsa bonnete ba hore palo eohle ea li-module tse hokahaneng ha e fete 5.
Haeba ho na le mathata a teng ka ho sibolloa ha module kapa phapanyetsano ea data, hlahloba habeli likhokahano 'me u netefatse hore sehokelo sa Aux le likotoana li kentsoe ka mokhoa o sireletsehileng ka har'a boema-kepe ba katoloso. Haeba mathata a ntse a tsoela pele, hlahloba lithapo leha e le life tse hlephileng kapa tse hokeletsoeng ka tsela e fosahetseng.
Ts'ebetso ea Sesebelisoa
Ho qala - IDE
Haeba u batla ho hlophisa Katoloso ea Arduino Opta® ea Analog ha u ntse u le sieo, u lokela ho kenya Arduino® Desktop IDE [1] le Arduino_Opta_Blueprint u sebelisa Laeborari Manager. Ho hokela Arduino Opta® khomphuteng ya hao, o tla hloka thapo ya USB-C®.
Ho qala - Arduino Cloud Editor
Lisebelisoa tsohle tsa Arduino® li sebetsa ka ntle ho lebokose ho Arduino® Cloud Editor [2] ka ho kenya plugin e bonolo feela.
Arduino® Cloud Editor e tsamaisoa inthaneteng, ka hona e tla lula e le morao-rao ka likarolo tsa morao-rao le tšehetso bakeng sa liboto tsohle le lisebelisoa. Latela [3] ho qala ho khouta sebatli le ho kenya litšoantšo tsa hau sesebelisoa sa hau.
Ho qala - Arduino PLC IDE
Katoloso ea Analog ea Arduino Opta® e ka boela ea hlophisoa ho sebelisoa lipuo tsa mananeo tsa IEC 61131-3 tse tloaelehileng. Khoasolla software ea Arduino® PLC IDE [4], hokela Opta® Katoloso ka Aux Connector ebe o hokela Arduino Opta® komporong ea hau u sebelisa thapo e bonolo ea USB-C® ho qala ho iketsetsa tharollo ea indasteri ea PLC. PLC IDE e tla lemoha katoloso mme e pepese li-I/O tse ncha tse fumanehang sefateng sa lisebelisoa.
Ho qala - Arduino Cloud
Lihlahisoa tsohle tse nolofalitsoeng tsa Arduino® IoT li tšehetsoa ho Arduino Cloud e u lumellang ho rekota, ho etsa graph le ho sekaseka lintlha tsa sensor, ho qala liketsahalo, le ho iketsetsa ntlo kapa khoebo ea hau.
Sample Sketches
Sample litšoantšo tsa Arduino Opta® Analog Expansion li ka fumanoa laebraring ea Arduino_Opta_Blueprint "Examples" ho Arduino® IDE kapa "Arduino Opta® Documentation" karolo ea Arduino® [5].
Lisebelisoa tsa Marang-rang
Kaha joale u se u fetile linthong tsa motheo tsa seo u ka se etsang ka sesebelisoa, u ka hlahloba menyetla e sa feleng eo e fanang ka eona ka ho hlahloba merero e thabisang ho ProjectHub [6], Arduino® Library Reference [7] le lebenkele la inthanete [8] moo o tla khona ho tlatselletsa sehlahisoa sa hau sa Arduino Opta® ka li-extensions tse ling, li-sensor le li-actuator.
Boitsebiso ba Mechini
Litekanyo tsa Sehlahisoa
Hlokomela: Li-terminal li ka sebelisoa ka terata e tiileng le e koetsoeng (min: 0.5 mm2 / 20 AWG).
Setifikeiti
Kakaretso ea Litifikeiti
| Cert | Katoloso ea Analog ea Arduino Opta® (AFX00007 |
| CE (EU) | EN IEC 61326-1:2021, EN IEC 61010 (LVD) |
| CB (EU) | Ee |
| WEEE (EU) | Ee |
| REACH (EU) | Ee |
| UKCA (UK) | EN IEC 61326-1:2021 |
| FCC (US) | Ee |
| qola | UL 61010-2-201 |
Declaration of Conformity CE DoC (EU)
Re phatlalatsa tlas'a boikarabelo ba rona hore lihlahisoa tse ka holimo li lumellana le litlhoko tsa bohlokoa tsa Litaelo tse latelang tsa EU 'me kahoo re tšoaneleha bakeng sa ho tsamaea ka bolokolohi ka har'a limmaraka tse kenyeletsang European Union (EU) le European Economic Area (EEA).
Phatlalatso ea Tumellano le EU RoHS & REACH 211 01/19/2021
Liboto tsa Arduino li lumellana le RoHS 2 Directive 2011/65/EU ea Paramente ea Europe le RoHS 3 Directive 2015/863/EU ea Lekhotla la 4 Phuptjane 2015 mabapi le thibelo ea tšebeliso ea lintho tse ling tse kotsi ho lisebelisoa tsa motlakase le tsa elektroniki.
| Ntho | Bolelele ba moeli (ppm) |
| Lebisa (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Motsoako (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Litokoloho: Ha ho litokollo tse batloang.
Arduino Boards e lumellana ka botlalo le litlhoko tse amanang le European Union Regulation (EC) 1907 /2006 mabapi le Ngoliso, Tlhahlobo, Tumello le Thibelo ea Lik'hemik'hale (REACH). Ha re phatlalatse leha e le efe ea SVHCs (https://echa.europa.eu/web/moeti/lethathamo la mokhethoa), Lethathamo la Bakhethoa ba Matšoenyeho a Phahameng ka ho Fetisisa bakeng sa tumello e lokollotsoeng ke ECHA, le teng lihlahisoa tsohle (le sephutheloana) ka bongata bo lekanang le mahloriso a lekanang kapa a ka holimo ho 0.1%. Ho ea ka tsebo ea rona, re boetse re phatlalatsa hore lihlahisoa tsa rona ha li na letho la lintho tse thathamisitsoeng ho "Authorization List" (Annex XIV ea melaoana ea REACH) le Substances of Very High Concern (SVHC) ka chelete leha e le efe ea bohlokoa joalokaha e boletsoe. ka Sehlomathiso sa XVII sa Lethathamo la Bakhethoa le hatisitsoeng ke ECHA (European Chemical Agency) 1907 /2006/EC.
Phatlalatso ea Liminerale tsa Khohlano
Joaloka mofani oa lefats'e oa lisebelisoa tsa elektroniki le tsa motlakase, Arduino e tseba boitlamo ba rona mabapi le melao le melaoana e amanang le Conflict Minerals, haholoholo Dodd-Frank Wall Street Reform and Consumer Protection Act, Karolo ea 1502. Arduino ha e hlahise kapa ha e sebetsane le likhohlano ka kotloloho. liminerale tse kang Tin, Tantalum, Tungsten, kapa Khauta. Liminerale tse loantšanang li fumaneha lihlahisoa tsa rona ka mokhoa oa solder, kapa e le karolo ea li-alloys tsa tšepe. E le karolo ea boitelo ba rona bo loketseng, Arduino e ikopanye le bafani ba thepa ba ka har'a ketane ea rona ea phepelo ho netefatsa hore ba tsoela pele ho latela melao. Ho ipapisitsoe le tlhaiso-leseling eo re e fumaneng ho tla fihlela joale, re phatlalatsa hore lihlahisoa tsa rona li na le Liminerale tsa Conflict tse tsoang libakeng tse se nang likhohlano.
FCC Tlhokomeliso
Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tsamaiso li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi
- sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Hlokomela: Thepa ena e lekoa 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokoa ho lokisa tšitiso eo ka litšenyehelo tsa hae.
Lintlha tsa Khampani
| Lebitso la K'hamphani | Arduino Srl |
| Aterese ea Khampani | Via Andrea Appiani, 25 – 20900 MONZA (Italy) |
Litokomane Tsa Litšupiso
| Ref | Sehokelo |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Leru) | https://create.arduino.cc/editor |
| Arduino Cloud - Ho qala | https://docs.arduino.cc/arduino-cloud/getting-started/iot-cloud-getting-started |
| Tlhaloso: Arduino PLC | https://www.arduino.cc/en/Main/Software |
| Litokomane tsa Arduino Opta® | https://docs.arduino.cc/hardware/opta |
| Morero Hub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Reference Library | https://www.arduino.cc/reference/en/ |
| Online Store | https://store.arduino.cc/ |
Nalane ea Phetoho
| Letsatsi | Khatiso | Liphetoho |
| 24/09/2024 | 4 | Lintlafatso tsa kou ea katoloso |
| 03/09/2024 | 3 | Cloud Editor e ntlafalitsoe ho tloha Web Mohlophisi |
| 05/07/2024 | 2 | Setšoantšo sa Block se ntlafalitsoe |
| 25/07/2024 | 1 | Phatlalatso ea Pele |
Litokomane / Lisebelisoa
 |
se fumaneng AFX00007 Arduino Configurable Analog [pdf] Buka ea Mong'a AFX00007 Arduino Configurable Analog, AFX00007, Arduino Configurable Analog, Configurable Analog, Analog |
