Control4 CORE 3 Controller
Daim ntawv qhia kev teeb tsa

C4-CORE3 Controller

Txhawb qauv
• C4-CORE3
Control4 CORE 3 Hub & Controller

Taw qhia

Tsim los rau kev lom zem ntau chav tshwj xeeb, Control4® CORE 3 Controller yog qhov zoo tshaj plaws fusion ntawm lub suab daws teeb meem thiab ntse automation rau cov haujlwm me me rau nruab nrab.
Lub CORE 3 muab qhov zoo nkauj, nkag siab zoo, thiab teb cov neeg siv ntawm lub vijtsam nrog lub peev xwm los tsim thiab txhim kho kev lom zem rau txhua lub TV hauv tsev. CORE 3 tuaj yeem tsim kho ntau yam kev lom zem xws li Blu-duab tshav players, satellite lossis cable thawv, game consoles, TVs, thiab txhua yam khoom siv nrog infrared (IR) lossis serial (RS-232) tswj. Nws kuj tseem muaj kev tswj hwm tus IP rau Apple TV, Roku, TVs, AVRs, lossis lwm yam khoom siv sib txuas nrog lub network, nrog rau kev tswj xyuas lub tshuab ntse siv kev sib cuag, kev xa xov, thiab kev ruaj ntseg wireless Zigbee thiab Z-Wave tswj rau lub teeb, ntsuas kub, ntsuas ntsuas ntse, thiab ntau dua
Rau kev lom zem, CORE 3 kuj suav nrog cov suab paj nruag built-in uas tso cai rau koj mloog koj lub tsev qiv ntawv suab paj nruag, tshaj tawm los ntawm ntau yam kev pabcuam suab paj nruag, lossis los ntawm koj cov khoom siv Airplay-enabled siv Control4 Shari Choj thev naus laus zis.
Cov ntsiab lus ntawm lub thawv
Cov khoom hauv qab no suav nrog hauv CORE 3 maub los lub thawv:

• CORE 3 maub los
• AC fais fab qaum
• IR emitters (3)
• Pob ntseg pob ntseg (2)
• Roj hmab taw (2)
• Cov kav hlau txais xov sab nraud (2, 1 rau Zigbee thiab 1 rau Z-Wave)
• Terminal thaiv rau kev sib cuag thiab relay

Accessories muaj rau kev yuav khoom

• CORE 3 Phab ntsa Mount Bracket (C4-CORE3-WM)
• Control4 3-Meter Wireless Antenna Kit (C4-AK-3M)
• Tswj 4 Dual-Band Wi-Fi USB Adapter (C4-USBWIFI lossis C4-USBWIFI-1)
• Control4 3.5 hli rau DB9 Serial Cable (C4-CBL3.5-DB9B)

Yuav tsum tau thiab specifications
Nco tseg: Peb pom zoo kom siv Ethernet es tsis txhob siv Wi-nkaus rau qhov zoo tshaj plaws kev sib txuas network.
Nco tseg: Lub Ethernet lossis Wi-Fi network yuav tsum tau teeb tsa ua ntej pib CORE 3 maub los teeb tsa.
Nco tseg: CORE 3 xav tau OS 3.3 lossis tshiab dua.
Composer Pro software yuav tsum tau teeb tsa lub cuab yeej no. Saib Composer Pro User Guide (ctrl4.co/cpro-ug) kom paub meej.

Ceeb toom
Ceev faj! Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws xob poob siab, tsis txhob tso cov cuab yeej no los nag lossis dej noo.
Ceev faj! Nyob rau hauv ib qho dhau-tam sim no ntawm USB, lub software disables cov zis. Yog hais tias lub cuab yeej txuas nrog USB tsis tshwm sim rau lub hwj chim, tshem tawm USB ntaus ntawv los ntawm tus maub los.

Specifications

	Inputs / Outputs
Video tawm	1 video tawm-1 HDMI
Video	HDMI 2.0a; 3840 × 2160 @ 60Hz (4K); HDCP 2.2 thiab HDCP 1.4
Suab tawm	4 lub suab tawm—1 HDMI, 2 × 3.5 mm lub tso suab tso suab, 1 digital coax
Digital teeb liab ua	Digital coax hauv-Input theem Suab Tawm 1/2 (analog) - Sib npaug, ntim, nrov, 6-band PEQ, mono / lub tso suab, kuaj teeb liab, suab nrov Digital coax out-Volume, mute
Audio playback hom ntawv	AAC, AIFF, ALAC, FLAC, M4A, MP2, MP3, MP4/M4A, Ogg Vorbis, PCM, WAV, WMA
Suab hauv	1 audio in—1 digital coax audio in
High-resolution audio playback	Mus txog 192 kHz / 24 ntsis
	Network
Ethernet	2 10/100/1000BaseT tshaj cov chaw nres nkoj-1 PoE + hauv thiab 1 hloov chaw nres nkoj network
Wi-nkaus	Optional Dual-Band Wi-Fi USB Adapter (2.4 GHz, 5 Ghz, 802.11ac/b/g/n/a)
Zigbee Pro	802.15.4
Zigbee kav hlau txais xov	Sab nraud rov qab SMA connector
Z-Wave	Z-Wave 700 series
Z-Wave kav hlau txais xov	Sab nraud rov qab SMA connector
USB chaw nres nkoj	1 USB 2.0 chaw nres nkoj-500mA
	Tswj
IR tawm	6 IR tawm-5V 27mA max tso zis
IR ntes	1 IR receiver-pem hauv ntej, 20-60 KHz
Serial tawm	3 serial tawm (sib koom nrog IR tawm 1-3)
Hu rau cov tswv yim	1 × 2-30V DC input, 12V DC 125mA max tso zis
Relay	1 × relay ouput-AC: 36V, 2A max hla relay; DC: 24V, 2A max hla relay
	Hwj chim
Lub zog xav tau	100-240 VAC, 60/50Hz lossis PoE +
Kev siv fais fab	Max: 18W, 61 BTUs / teev Idle: 12W, 41 BTUs / teev
	Lwm yam
Ua haujlwm kub	32˚F ~ 104˚F (0˚C ~ 40˚C)
Cia kub	4˚F ~ 158˚F (-20˚C ~ 70˚C)
Qhov Loj (H × W × D)	1.68 × 8.63 × 5.5 "(42.9 × 220 × 140 hli)
Qhov hnyav	2.1 hli (0.95 kg)
Shipping hnyav	3.5 hli (1.6 kg)

Cov peev txheej ntxiv

Cov peev txheej hauv qab no muaj rau kev txhawb nqa ntxiv.

•  Control4 CORE series pab thiab cov ntaub ntawv: ctrl4.co/cov
• Snap One Tech Community thiab Knowledgebase: tech.control4.com
•  Control4 Technical Support: ctrl4.co/techsupport
• Tswj 4 webqhov chaw: www.control4.com

Pem hauv ntej view

Kev ua haujlwm LED-Qhov Kev Ua Haujlwm LED qhia tau hais tias thaum tus maub los yog streaming suab.
B IR qhov rais—IR receiver rau kev kawm IR codes.
C Ceeb Toom LED—Cov LED no qhia cov xim liab, ces blinks xiav thaum lub caij khau raj.
Nco tseg: Kev Ceeb Toom LED blinks txiv kab ntxwv thaum lub Hoobkas rov ua haujlwm. Saib "Reset rau Hoobkas nqis" hauv daim ntawv no.
D Link LED—Lub LED qhia tau hais tias tus tswj tau raug txheeb xyuas nyob rau hauv ib txoj haujlwm Control4 thiab tab tom sib txuas lus nrog Tus Thawj Coj.
Lub zog LED-Lub xiav LED qhia tias AC fais fab tam sim no. Tus maub los qhib tam sim ntawd tom qab siv fais fab rau nws.

Rov qab view

Lub zog hluav taws xob-AC fais fab txuas rau IEC 60320-C5 fais fab qaum
B Sib cuag thiab relay— Txuas ib lub relay ntaus ntawv thiab ib qho kev sib cuag sensor ntaus ntawv mus rau lub davhlau ya nyob twg thaiv connector. Relay kev sib txuas yog COM, NC (ib txwm kaw), thiab TSIS MUAJ (ib txwm qhib). Kev sib cuag sensor yog +12, SIG (cim), thiab GND (hauv av).
C IR OUT/SERIAL—3.5 hli jacks rau txog rau rau IR emitters lossis rau kev sib xyaw ntawm IR emitters thiab cov khoom siv sib txuas. Chaw nres nkoj 1, 2, thiab 3 tuaj yeem teeb tsa ntawm nws tus kheej rau kev tswj hwm kev tswj hwm (rau kev tswj cov txais lossis cov hloov pauv disc) lossis rau IR tswj. Saib "Txuas txuas IR ports/serial ports" hauv daim ntawv no kom paub ntau ntxiv.
DIGITAL COAX IN —Tso cai rau lub suab sib koom hauv lub network hauv zos rau lwm yam khoom siv Control4.
E AUDIO OUT 1/2 —Outputs suab sib koom los ntawm lwm yam Control4 pab kiag li lawm los yog los ntawm cov digital audio sources (local media or digital streaming services).
F DIGITAL COAX tawm-Outputs suab sib koom los ntawm lwm yam Control4 pab kiag li lawm los yog los ntawm cov digital audio sources (hauv zos media lossis digital streaming cov kev pab cuam xws li).
G USB—Ib qho chaw nres nkoj rau ib qho USB tsav sab nraud (xws li USB stick formatted FAT32). Saib "Setting up external storage devices" nyob rau hauv daim ntawv no.
H HDMI OUT-Ib qho chaw nres nkoj HDMI los tso saib cov ntawv qhia zaub mov. Kuj tseem muaj lub suab tawm ntawm HDMI.
Kuv ID khawm thiab RESET-ID khawm yog nias los txheeb xyuas cov cuab yeej hauv Composer Pro. Tus ID khawm ntawm CORE 3 kuj yog ib qho LED uas qhia tawm tswv yim pab tau thaum lub Hoobkas rov qab los. Lub RESET pinhole yog siv los rov pib dua lossis lub Hoobkas rov kho tus maub los.
J VAJ—Kav hlau txais xov txuas rau Z-Wave xov tooj cua.
K ENET OUT-RJ-45 jack rau Ethernet tawm kev sib txuas. Ua raws li 2-chaw nres nkoj network hloov nrog ENET / POE + IN jack.
L ENET/POE+ IN-RJ-45 jack rau 10/100/1000BaseT Ethernet txuas. Kuj tseem tuaj yeem siv hluav taws xob tswj nrog PoE +.
M ZIB- Kav hlau txais xov txuas rau xov tooj cua Zigbee.

Cov lus qhia installation

Txhawm rau nruab tus maub los:

1. Xyuas kom meej tias lub network hauv tsev nyob hauv qhov chaw ua ntej pib teeb tsa. Yuav tsum muaj kev sib txuas Ethernet rau lub network hauv zos rau kev teeb tsa. Tus maub los yuav tsum muaj kev sib txuas hauv network siv tag nrho cov yam ntxwv raws li tsim. Tom qab kev teeb tsa thawj zaug, Ethernet (pom zoo) lossis Wi-Fi tuaj yeem siv los txuas tus maub los rau web- raws li cov ntaub ntawv xov xwm, sib txuas lus nrog lwm cov khoom siv IP hauv tsev, thiab nkag mus rau Control4 qhov kev hloov kho tshiab.
2. Mount tus maub los ze rau cov khoom siv hauv zos uas koj xav tau los tswj. Tus maub los yuav muab zais tom qab TV, mounted rau ntawm phab ntsa, ntsia rau hauv khib, los yog muab tso rau hauv txee. CORE 3 Phab ntsa-Mount Bracket yog muag cais thiab tsim kom yooj yim installation ntawm CORE 3 maub los tom qab TV lossis ntawm phab ntsa.
3. Txuas cov kav hlau txais xov rau ZIGBEEE thiab ZWAVE kav hlau txais xov txuas.
4.  Txuas tus maub los rau lub network.
   • Ethernet—Txuas txuas siv Ethernet kev sib txuas, txuas lub network cable rau hauv tus maub los RJ-45 chaw nres nkoj (labeled ENET/POE+ IN) thiab mus rau hauv lub network chaw nres nkoj ntawm phab ntsa lossis ntawm lub network hloov.
   • Wi-Fi—Txuas txuas siv Wi-Fi, ua ntej txuas lub tsev rau Ethernet, txuas lub Wi-Fi adapter mus rau USB chaw nres nkoj, thiab tom qab ntawd siv Composer Pro System Manager los teeb tsa chav tsev rau Wi-Fi.
5. Txuas cov cuab yeej siv. Txuas IR thiab cov khoom siv sib txuas raws li tau piav qhia hauv "Txuas txuas IR chaw nres nkoj / cov chaw nres nkoj serial" thiab "Tshaj IR emitters."
6. Teem ib qho khoom siv cia sab nraud raws li tau piav qhia hauv "Teeb tsa cov cuab yeej cia sab nraud" hauv daim ntawv no.
7. Yog tias siv AC lub zog, txuas cov hlua hluav taws xob mus rau tus maub los lub hwj chim chaw nres nkoj thiab tom qab ntawd mus rau hauv lub qhov hluav taws xob.

Txuas IR ports / serial ports (optional)
Tus maub los muab rau IR chaw nres nkoj, thiab cov chaw nres nkoj 1, 2, thiab 3 tuaj yeem hloov kho nws tus kheej rau kev sib txuas lus serial. Yog tias tsis siv rau serial, lawv tuaj yeem siv rau IR. Txuas cov khoom siv sib txuas mus rau tus maub los siv Control4 3.5 mm-to- DB9 Serial Cable (C4-CBL3.5-DB9B, muag nyias).

1. Cov chaw nres nkoj serial txhawb baud tus nqi nruab nrab ntawm 1200 txog 115200 baud rau khib thiab txawm tias parity. Cov chaw nres nkoj serial tsis txhawb kev tswj xyuas cov khoom siv.
2. Saib Knowledgebase tshooj #268 (ctrl4.co/contr-serial-pinout) rau pinout daim duab.
3. Txhawm rau teeb tsa qhov chaw nres nkoj rau serial lossis IR, ua qhov kev sib txuas tsim nyog hauv koj qhov project siv Composer Pro. Saib Composer Pro Tus Neeg Siv Qhia kom paub meej.
   Nco tseg: Cov chaw nres nkoj serial tuaj yeem teeb tsa raws li ncaj nraim lossis tsis muaj nrog Composer Pro. Serial chaw nres nkoj los ntawm lub neej ntawd tau teeb tsa ncaj nraim thiab tuaj yeem hloov pauv hauv Composer los ntawm kev xaiv Null Modem Enabled (SERIAL 1, 2, lossis 3).

Teeb tsa IR emitters
Koj lub kaw lus yuav muaj cov khoom thib peb uas tau tswj los ntawm IR cov lus txib.

1. Txuas ib qho ntawm IR emitters nrog rau IR OUT chaw nres nkoj ntawm tus maub los.
2. Tso lub nplaum-on emitter kawg rau ntawm IR receiver ntawm Blu-duab tshav player, TV, lossis lwm yam khoom siv lub hom phiaj kom emit IR signals los ntawm tus maub los rau lub hom phiaj ntaus ntawv.

Teeb tsa cov cuab yeej cia sab nraud (yeem)
Koj tuaj yeem khaws thiab nkag mus rau cov xov xwm los ntawm ib qho chaw cia khoom sab nraud, piv txwv liample, lub network hard drive lossis USB nco ntaus ntawv, los ntawm kev txuas lub USB tsav mus rau USB chaw nres nkoj thiab teeb tsa lossis luam theej duab cov xov xwm hauv Composer Pro.
Nco tseg: Peb tsuas yog txhawb nqa USB drives sab nraud lossis cov khoom hauv lub xeev USB sticks.
Tsis muaj kev txhawb nqa tus kheej-powered USB drives.
Nco tseg: Thaum siv USB cia li ntawm CORE 3 maub los, koj tuaj yeem siv tsuas yog ib qho kev faib nrog 2 TB qhov loj tshaj plaws. Qhov kev txwv no tseem siv tau rau USB cia ntawm lwm tus tswj hwm.

Composer Pro cov ntaub ntawv tsav tsheb
Siv Auto Discovery thiab SDDP ntxiv tus tsav tsheb rau Composer project. Saib Composer Pro User Guide (ctrl4.co/cpro-ug) kom paub meej.

OvrC teeb tsa thiab teeb tsa
OvrC muab rau koj cov chaw taws teeb tswj cov cuab yeej, cov ntawv ceeb toom ntawm lub sijhawm, thiab kev tswj xyuas cov neeg siv khoom zoo, ncaj qha los ntawm koj lub khoos phis tawj lossis lub xov tooj ntawm tes. Kev teeb tsa yog ntsaws-thiab-ua si, tsis muaj chaw nres nkoj xa mus lossis chaw nyob DDNS xav tau.
Txhawm rau ntxiv cov cuab yeej no rau koj tus lej OvrC:

1. Txuas CORE 3 maub los rau hauv Is Taws Nem.
2. Nkag mus rau OvrC (www.ovrc.com) thiab nkag mus rau hauv koj tus account.
3. Ntxiv lub cuab yeej (MAC chaw nyob thiab Kev Pabcuam Tag tus lej xav tau rau kev lees paub).

Pluggable davhlau ya nyob twg thaiv connectors
Rau kev sib cuag thiab cov chaw nres nkoj relay, CORE 3 ua rau siv cov pluggable terminal block connectors uas yog tshem tau cov khoom yas uas kaw rau hauv ib tus neeg hlau (suav nrog).
Txhawm rau txuas ib lub cuab yeej mus rau pluggable terminal block:

1. Ntxig ib qho ntawm cov xov hlau uas xav tau rau koj lub cuab yeej rau hauv qhov tsim nyog qhib rau hauv lub pluggable davhlau ya nyob twg thaiv koj tau tseg rau lub cuab yeej ntawd.
2. Siv lub taub hau me me kom nruj lub hau ntswj thiab tuav cov xaim hauv lub davhlau ya nyob twg.

Example: Txhawm rau ntxiv lub suab sensor (saib daim duab 3), txuas nws cov xov hlau mus rau qhov qhib kev sib cuag hauv qab no:

• Lub zog input rau + 12 V
• Output signal rau SIG
• Hauv av connector rau GND

Nco tseg: Txhawm rau txuas cov khoom kaw qhuav, xws li lub tswb nrov, txuas qhov hloov ntawm +12 (lub zog) thiab SIG (lub teeb liab).

Txuas qhov chaw nres nkoj hu
Lub CORE 3 muab ib qho chaw tiv tauj ntawm qhov txuas txuas txuas txuas nrog (+12, SIG, GRD). Saib tus examples hauv qab no kom paub yuav ua li cas txuas ntau yam khoom siv rau qhov chaw nres nkoj hu.

Txuas lub relay chaw nres nkoj
Lub CORE 3 muab ib qho chaw nres nkoj ntawm qhov txuas txuas txuas nrog lub davhlau ya nyob twg.
Saib tus examples hauv qab no los kawm tam sim no los txuas ntau yam khoom siv rau qhov chaw nres nkoj relay.

Kev daws teeb meem

Rov qab mus rau lub Hoobkas nqis
Ceev faj! Lub Hoobkas rov txheej txheem yuav tshem tawm qhov Composer project.
Txhawm rau rov kho tus maub los rau lub Hoobkas default duab:

1. Ntxig ib kawg ntawm ib daim ntawv clip rau hauv lub qhov me me nyob rau sab nraum qab ntawm tus maub los uas tau sau npe RESET.
2. Nias thiab tuav lub RESET khawm. Tus maub los pib dua thiab khawm ID hloov mus rau cov khoom liab.
3. Tuav lub pob kom txog thaum tus ID flashes ob lub txiv kab ntxwv. Qhov no yuav tsum siv tsib mus rau xya vib nas this. Lub khawm ID flashes txiv kab ntxwv thaum lub Hoobkas rov ua haujlwm. Thaum ua tiav, tus ID khawm kaw thiab lub tshuab hluav taws xob lub voj voog ib zaug ntxiv kom tiav cov txheej txheem rov qab los ntawm lub Hoobkas.

Nco tseg: Thaum lub sijhawm rov pib dua, tus ID khawm muab cov lus qhia tib yam li Kev Ceeb Toom LED nyob rau pem hauv ntej ntawm tus maub los.

Fais fab voj voog lub maub los
1 Nias thiab tuav tus ID khawm rau tsib vib nas this. Tus maub los tua thiab rov qab rau.
Pib dua cov kev teeb tsa network
Txhawm rau rov pib dua tus maub los network teeb tsa rau lub neej ntawd:

1. Disconnect hwj chim rau tus maub los.
2. Thaum nias thiab tuav tus ID khawm nyob tom qab ntawm tus maub los, lub hwj chim ntawm tus maub los.
3. Tuav tus ID khawm kom txog thaum ID khawm hloov xim txiv kab ntxwv thiab qhov txuas thiab lub zog LEDs yog xim xiav, thiab tom qab ntawd tso lub pob tam sim ntawd.
   Nco tseg: Thaum lub sijhawm rov pib dua, tus ID khawm muab cov lus qhia tib yam li Kev Ceeb Toom LED nyob rau pem hauv ntej ntawm tus maub los.

LED xwm txheej cov ntaub ntawv

	Tsuas yog siv lub tshuab xwb
	Boot pib
	Boot tiav
	Network rov pib dua check
	Lub Hoobkas rov qab ua haujlwm (2 flashes ib ob)
	Txuas nrog Tus Thawj Coj
	Ua si suab
	Hloov kho (1 flash per 2 vib nas this)
	Hloov tshiab yuam kev (1 flash per 2 vib nas this)
	Tsis muaj IP chaw nyob (1 flash per 2 vib nas this)

Kev pab ntxiv
Rau qhov tseeb version ntawm daim ntawv no thiab rau view cov ntaub ntawv ntxiv, qhib lub URL hauv qab no lossis luam theej duab QR code ntawm lub cuab yeej uas tuaj yeem ua tau view PDFs.

http://ctrl4.co/core3-ig	http://ctrl4.co/core

Raws li txoj cai, Warranty, thiab kev cai / kev nyab xeeb cov ntaub ntawv Mus saib snapone.com/legal kom paub meej.

Copyright 2023, Snap One, LLC. Txhua txoj cai. Snap One thiab nws cov logos yog cov npe lag luam lossis cov cim lag luam ntawm Snap One, LLC (yav tas los hu ua Wire path Home Systems, LLC), hauv Tebchaws Meskas thiab / lossis lwm lub tebchaws. 4Store, 4Sight, Control4, Control4 Kuv Lub Tsev, Snape, Nyob, NEEO, OvrC, Txoj Kev Hlau, thiab Hlau Txoj Kev IB kuj yog cov cim lag luam lossis cov cim lag luam ntawm Snap One, LLC. Lwm cov npe thiab cov npe yuav raug lees paub tias yog cov cuab yeej ntawm lawv cov tswv. Snap One tsis lees paub tias cov ntaub ntawv muaj tswj 4.com | 888.400.4070 ntawm no suav nrog txhua qhov teeb meem kev teeb tsa thiab teeb meem, lossis kev pheej hmoo ntawm kev siv khoom. Cov ntaub ntawv hauv qhov kev qhia tshwj xeeb no yuav hloov pauv yam tsis tau ceeb toom.

B
200-00725-IB
2023-07-26 MKX

Cov ntaub ntawv / Cov ntaub ntawv

CONTROL4 C4-CORE3 Controller [ua pdf] Tus neeg siv phau ntawv C4-CORE3 maub los, C4-CORE3, maub los

Cov ntaub ntawv

• Cov neeg siv phau ntawv