Control4 CORE 3 Mai sarrafawa
Jagoran Shigarwa

Mai Kula da C4-CORE3

Samfurin tallafi
• C4-CORE3
Control4 CORE 3 Hub & Mai Sarrafa

Gabatarwa

An ƙera shi don ƙwarewar nishaɗin ɗakuna da yawa na musamman, Control4® CORE 3 Mai Kula da ita shine cikakkiyar haɗuwa da babban sauti mai ƙarfi da aiki da kai mai kaifin baki ga waɗannan ƙananan ayyuka masu girman matsakaici.
CORE 3 yana ba da kyakkyawan tsari, mai fahimta, da mai amfani da mai amfani akan allo tare da ikon ƙirƙirar da haɓaka ƙwarewar nishaɗi ga kowane TV a cikin gidan. CORE 3 na iya tsara nau'ikan na'urorin nishaɗi da suka haɗa da 'yan wasan Blu-ray, tauraron dan adam ko akwatunan kebul, na'urorin wasan bidiyo, TV, da kusan kowane samfur mai sarrafa infrared (IR) ko serial (RS-232). Hakanan yana da ikon sarrafa IP don Apple TV, Roku, talabijin, AVRs, ko wasu na'urorin haɗin yanar gizo, da kuma sarrafa sarrafa kai tsaye ta amfani da lamba, relay, da amintaccen Zigbee mara waya da ikon Z-Wave don fitilu, thermostats, makullai masu wayo, da sauransu
Don nishaɗi, CORE 3 ya haɗa da ginanniyar uwar garken kiɗa wanda ke ba ku damar sauraron ɗakin karatu na kiɗanku, yawo daga manyan ayyukan kiɗa iri-iri, ko daga na'urorin ku na Airplay ta amfani da fasahar Control4 Shari Bridge.
Abubuwan da ke cikin akwatin
Ana haɗa abubuwa masu zuwa a cikin akwatin CORE 3:

• CORE 3 mai sarrafawa
• AC igiyar wuta
• Masu fitar da iska (3)
• Kunnuwa (2)
• Ƙafafun roba (2)
• Eriya na waje (2, 1 don Zigbee da 1 don Z-Wave)
• Katanga tasha don tuntuɓar sadarwa da relay

Akwai na'urorin haɗi don siya

• CORE 3 Bracket Dutsen bango (C4-CORE3-WM)
• Control4 3-Mita Mara waya ta Eriya Kit (C4-AK-3M)
• Control4 Dual-Band Wi-Fi adaftar USB (C4-USBWIFI KO C4-USBWIFI-1)
• Control4 3.5 mm zuwa DB9 Serial Cable (C4-CBL3.5-DB9B)

Bukatu da ƙayyadaddun bayanai
Lura: Muna ba da shawarar amfani da Ethernet maimakon Wi-Fi don mafi kyawun haɗin cibiyar sadarwa.
Lura: Ya kamata a shigar da hanyar sadarwar Ethernet ko Wi-Fi kafin fara shigarwar mai sarrafa CORE 3.
Lura: CORE 3 yana buƙatar OS 3.3 ko sabo.
Ana buƙatar software na mawaki Pro don saita wannan na'urar. Duba Jagorar Mai Amfani Pro Mawaƙi (ctrl4.co/cpro-ug) don ƙarin bayani.

Gargadi
Tsanaki! Don rage haɗarin girgizar lantarki, kar a bijirar da wannan na'urar ga ruwan sama ko danshi.
Tsanaki! A cikin yanayi na yau da kullun akan USB, software tana kashe fitarwa. Idan na'urar USB da aka makala ba ta bayyana tana kunnawa ba, cire na'urar USB daga mai sarrafawa.

Ƙayyadaddun bayanai

	Abubuwan da aka shigar / abubuwan fitarwa
Fitar bidiyo	1 bidiyo fita-1 HDMI
Bidiyo	HDMI 2.0a; 3840×2160 @ 60Hz (4K); HDCP 2.2 da HDCP 1.4
Audio fita	4 audio out — 1 HDMI, 2 × 3.5 mm sitiriyo audio, 1 dijital coax
Tsarin siginar dijital	Dijital coax in — matakin shigarwa Audio Out 1/2 (analog) — Ma'auni, ƙara, ƙara, 6-band PEQ, mono/stereo, siginar gwaji, bebe Dijital coax out — Volume, bebe
Tsarin sake kunnawa audio	AAC, AIFF, ALAC, FLAC, M4A, MP2, MP3, MP4/M4A, Ogg Vorbis, PCM, WAV, WMA
Sauti a ciki	1 audio in-1 dijital coax audio in
sake kunnawa mai ƙarfi mai ƙarfi	Har zuwa 192 kHz / 24 bit
	Cibiyar sadarwa
Ethernet	2.
Wi-Fi	Adaftan USB Dual-Band Wi-Fi Na zaɓi (2.4 GHz, 5 Ghz, 802.11ac/b/g/n/a)
Zigbee Pro	802.15.4
Zigbee eriya	Mai haɗa SMA na baya
Z-Wave	Z-Wave 700 jerin
eriya Z-Wave	Mai haɗa SMA na baya
tashar USB	1 USB 2.0 tashar jiragen ruwa - 500mA
	Sarrafa
IR waje	6 IR fita - 5V 27mA max fitarwa
IR kama	1 mai karɓar IR-gaba, 20-60 kHz
Serial fita	3 serial out (an raba tare da IR out 1-3)
Shigar da lamba	1 × 2-30V DC shigarwar, 12V DC 125mA max fitarwa
Relay	1 × relay fitarwa-AC: 36V, 2A max a fadin gudun ba da sanda; DC: 24V, 2A max a fadin relay
	Ƙarfi
Bukatun wutar lantarki	100-240 VAC, 60/50Hz ko PoE+
Amfanin wutar lantarki	Matsakaicin: 18W, 61 BTUs/h Rashin aiki: 12W, 41 BTUs/h
	Sauran
Yanayin aiki	32˚F ~ 104˚F (0˚C ~ 40˚C)
Yanayin ajiya	4˚F ~ 158˚F (-20˚C ~ 70˚C)
Girma (H × W × D)	1.68 × 8.63 × 5.5” (42.9 × 220 × 140 mm)
Nauyi	2.1 lb (0.95 kg)
Nauyin jigilar kaya	3.5 lb (1.6 kg)

Ƙarin albarkatu

Ana samun albarkatu masu zuwa don ƙarin tallafi.

•  Taimako da bayani na Series4 CORE: ctrl4.co/core
• Snap One Tech Community da Ilmi: tech.control4.com
•  Gudanarwa4 Tallafin Fasaha: ctrl4.co/techsupport
• Sarrafa4 website: www.control4.com

Gaba view

LED Aiki -Ayyukan LED yana nuna lokacin da mai sarrafawa ke yawo audio.
B IR taga -Mai karɓar IR don koyan lambobin IR.
C Tsanaki LED-Wannan LED yana nuna m ja, sa'an nan kuma kiftawa blue a lokacin taya tsari.
Lura: The Tsanaki LED bliss orange a lokacin factory mayar da tsari. Duba "Sake saitin zuwa saitunan masana'anta" a cikin wannan takaddar.
D Link LED-LED ɗin yana nuna cewa an gano mai sarrafawa a cikin aikin Control4 kuma yana sadarwa tare da Darakta.
E Power LED-LED mai shuɗi yana nuna cewa ikon AC yana nan. Mai sarrafawa yana kunna kai tsaye bayan an yi amfani da wutar lantarki a kai.

Baya view

Tashar wutar lantarki -Mai haɗa wutar AC don igiyar wutar lantarki ta IEC 60320-C5.
B Tuntuɓi da watsa labarai - Haɗa na'urar relay guda ɗaya da na'urar firikwensin tuntuɓar lamba ɗaya zuwa mai haɗin toshe tasha. Haɗin Relay sune COM, NC (a rufe yawanci), da NO (a buɗewa kullum). Haɗin firikwensin lamba sune +12, SIG (sigina), da GND (ƙasa).
C IR OUT/SERIAL-3.5mm jacks na har zuwa shida IR emitters ko don haɗin IR emitters da serial na'urorin. Ana iya daidaita tashoshin jiragen ruwa 1, 2, da 3 da kansu don sarrafa serial (don sarrafa masu karɓa ko masu canza diski) ko don sarrafa IR. Dubi "Haɗa tashoshin jiragen ruwa na IR / serial ports" a cikin wannan takarda don ƙarin bayani.
D DIGITAL COAX IN-Yana ba da damar raba sauti akan hanyar sadarwar gida zuwa wasu na'urorin Control4.
E AUDIO FITAR 1/2-Yana fitar da sautin da aka raba daga wasu na'urorin Control4 ko daga kafofin sauti na dijital (kafofin watsa labarai na gida ko sabis na yawo na dijital).
F DIGITAL COAX OUT-Fitar da sauti da aka raba daga wasu na'urori na Control4 ko daga kafofin sauti na dijital (kafofin watsa labarai na gida ko sabis na yawo na dijital kamar).
G USB-Ɗaya daga cikin tashar jiragen ruwa don kebul na USB na waje (kamar sandar USB da aka tsara FAT32). Dubi "Kafa na'urorin ajiya na waje" a cikin wannan takaddar.
H HDMI FITA- tashar tashar HDMI don nuna menus kewayawa. Hakanan ana samun sauti ta hanyar HDMI.
Maballin IID da SAKESA-Ana danna maɓallin ID don gano na'urar a cikin Mawaƙin Pro. Maɓallin ID akan CORE 3 shima LED ne wanda ke nuna ra'ayi mai amfani yayin dawo da masana'anta. Ana amfani da RESET pinhole don sake saiti ko masana'anta maido da mai sarrafawa.
J ZWAVE-Mai haɗa eriya don rediyon Z-Wave.
K ENET FITA-Jack RJ-45 don haɗin waje na Ethernet. Yana aiki azaman mai sauya hanyar sadarwa ta tashar jiragen ruwa 2 tare da ENET/POE+ IN jack.
L ENET/POE+ IN-Jack RJ-45 don haɗin 10/100/1000BaseT Ethernet. Hakanan zai iya kunna mai sarrafawa tare da PoE+.
M ZIGBEE-Mai haɗa eriya don rediyon Zigbee.

umarnin shigarwa

Don shigar da mai sarrafawa:

1. Tabbatar cewa cibiyar sadarwar gida tana wurin kafin fara saitin tsarin. Ana buƙatar haɗin Ethernet zuwa cibiyar sadarwar gida don saitin. Mai sarrafawa yana buƙatar haɗin cibiyar sadarwa don amfani da duk fasalulluka kamar yadda aka tsara. Bayan saitin farko, Ethernet (an shawarta) ko Wi-Fi ana iya amfani da shi don haɗa mai sarrafawa zuwa web- tushen bayanan kafofin watsa labaru, sadarwa tare da wasu na'urorin IP a cikin gida, da samun damar sabunta tsarin Control4.
2. Dutsen mai sarrafawa kusa da na'urorin gida da kuke buƙatar sarrafawa. Ana iya ɓoye mai sarrafawa a bayan TV, a ɗaura shi akan bango, shigar da shi a cikin rake, ko sanya shi a kan shiryayye. Ana siyar da Bracket na bangon CORE 3 daban kuma an tsara shi don sauƙin shigar da mai sarrafa CORE 3 a bayan TV ko a bango.
3. Haɗa eriya zuwa masu haɗin eriyar ZIGBEE da ZWAVE.
4.  Haɗa mai sarrafawa zuwa cibiyar sadarwa.
   Ethernet-Don haɗawa ta hanyar haɗin Ethernet, haɗa kebul na cibiyar sadarwa zuwa tashar tashar RJ-45 mai sarrafawa (mai lakabin ENET/POE+ IN) kuma cikin tashar cibiyar sadarwa akan bango ko a wurin sauya hanyar sadarwa.
   Wi-Fi-Don haɗawa ta amfani da Wi-Fi, fara haɗa naúrar zuwa Ethernet, haɗa adaftar Wi-Fi zuwa tashar USB, sannan yi amfani da Mawallafin Pro System Manager don sake saita naúrar don Wi-Fi.
5. Haɗa na'urorin tsarin. Haɗa IR da na'urorin serial kamar yadda aka bayyana a cikin "Haɗin tashar jiragen ruwa na IR / serial ports" da "Kafa IR emitters."
6. Saita kowace na'urar ma'ajiya ta waje kamar yadda aka bayyana a cikin "Shigar da na'urorin ajiya na waje" a cikin wannan takaddar.
7. Idan ana amfani da wutar AC, haɗa igiyar wutar lantarki zuwa tashar wutar lantarkin mai sarrafawa sannan cikin mashin wutar lantarki.

Haɗa tashoshin jiragen ruwa na IR / serial ports (na zaɓi)
Mai sarrafawa yana ba da tashoshin IR guda shida, kuma tashoshin 1, 2, da 3 za'a iya sake daidaita su da kansu don sadarwar serial. Idan ba a yi amfani da su don serial ba, ana iya amfani da su don IR. Haɗa serial na'urar zuwa mai sarrafawa ta amfani da Control4 3.5 mm-to- DB9 Serial Cable (C4-CBL3.5-DB9B, sayarwa daban).

1. Serial tashoshin jiragen ruwa suna goyan bayan ƙimar baud tsakanin 1200 zuwa 115200 baud don m har ma da daidaito. Serial tashoshin jiragen ruwa ba su goyi bayan sarrafa kwararar hardware.
2. Duba labarin tushen Ilimi #268 (ctrl4.co/contr-serial-pinout) don zane-zane.
3. Don saita tashar jiragen ruwa don serial ko IR, yi hanyoyin haɗin da suka dace a cikin aikin ku ta amfani da Mawaƙin Pro. Duba Jagorar Mai Amfani Pro Mawaƙi don cikakkun bayanai.
   Lura: Za'a iya saita tashoshin jiragen ruwa na serial azaman madaidaiciya-ta hanyar ko banza tare da Mawaƙin Pro. Serial ports ta tsohuwa ana saita su kai tsaye kuma ana iya canza su a cikin Mawaƙi ta zaɓi Null Modem Enabled (SERIAL 1, 2, ko 3).

Kafa IR emitters
Tsarin ku na iya ƙunsar samfuran ɓangare na uku waɗanda ake sarrafawa ta hanyar umarnin IR.

1. Haɗa ɗaya daga cikin abubuwan da aka haɗa na IR zuwa tashar IR OUT akan mai sarrafawa.
2. Sanya ƙarshen emitter na sanda akan mai karɓar IR akan na'urar Blu-ray, TV, ko sauran na'urar da aka yi niyya don fitar da siginar IR daga mai sarrafawa zuwa na'urar da aka yi niyya.

Saita na'urorin ajiya na waje (na zaɓi)
Kuna iya adanawa da samun dama ga kafofin watsa labarai daga na'urar ajiyar waje, misaliample, rumbun kwamfutarka na cibiyar sadarwa ko na'urar ƙwaƙwalwar ajiyar USB, ta hanyar haɗa kebul ɗin USB zuwa tashar USB da daidaitawa ko bincika kafofin watsa labarai a cikin Mawaki Pro.
Lura: Muna goyan bayan fayafan kebul na waje kawai ko sandunan USB masu ƙarfi.
Kebul na USB masu iko da kai ba su da tallafi.
Lura: Lokacin amfani da na'urorin ajiya na USB akan mai sarrafa CORE 3, zaku iya amfani da bangare ɗaya kawai tare da matsakaicin girman TB 2. Wannan iyakance kuma ya shafi ma'ajin USB akan wasu masu sarrafawa.

Bayanin direban mawaki Pro
Yi amfani da Ganowar atomatik da SDDP don ƙara direba zuwa aikin Mawaƙi. Duba Jagorar Mai Amfani Pro Mawaƙi (ctrl4.co/cpro-ug) don ƙarin bayani.

Saitin OvrC da daidaitawa
OvrC yana ba ku sarrafa na'ura mai nisa, sanarwa na ainihin lokaci, da kuma kulawar abokin ciniki, tun daga kwamfutarku ko na'urar hannu. Saita shine toshe-da-wasa, ba tare da tura tashar jiragen ruwa ko adireshin DDNS da ake buƙata ba.
Don ƙara wannan na'urar zuwa asusun OvrC:

1. Haɗa mai sarrafa CORE 3 zuwa Intanet.
2. Kewaya zuwa OvrC (www.ovrc.com) kuma shiga cikin asusunka.
3. Ƙara na'urar (adireshin MAC da Sabis Tag lambobi da ake buƙata don tantancewa).

Masu haɗa tasha masu toshewa
Domin tuntuɓar mashigai da tashar jiragen ruwa na relay, CORE 3 na yin amfani da na'urorin haɗin toshe masu toshewa waɗanda keɓaɓɓun sassan filastik ne masu cirewa waɗanda ke kulle cikin wayoyi ɗaya (an haɗa).
Don haɗa na'ura zuwa toshe tasha mai iya toshewa:

1. Saka ɗaya daga cikin wayoyi da ake buƙata don na'urarka a cikin buɗaɗɗen da ya dace a cikin toshe tasha mai iya toshewa da kuka tanada don waccan na'urar.
2. Yi amfani da ƙaramin screwdriver mai lebur don ƙara ƙarar dunƙulewa da amintar da waya a cikin toshewar tasha.

Example: Don ƙara firikwensin motsi (duba Hoto 3), haɗa wayoyi zuwa wuraren buɗewar sadarwa masu zuwa:

• Shigar da wutar lantarki zuwa +12V
• Siginar fitarwa zuwa SIG
• Mai haɗa ƙasa zuwa GND

Lura: Don haɗa busassun na'urorin rufe lamba, kamar kararrawa kofa, haɗa mai sauyawa tsakanin +12 (ikon) da SIG (sigina).

Haɗa tashar sadarwa
CORE 3 yana ba da tashar sadarwa guda ɗaya akan toshe tasha mai haɗawa (+12, SIG, GRD). Duba tsohonampLes kasa don koyon yadda ake haɗa na'urori daban-daban zuwa tashar sadarwa.

Haɗa tashar jiragen ruwa
CORE 3 yana ba da tashar jiragen ruwa na relay guda ɗaya akan toshe tasha mai toshewa.
Duba tsohonampLes kasa don koyi yanzu don haɗa na'urori daban-daban zuwa tashar jiragen ruwa na relay.

Shirya matsala

Sake saita zuwa saitunan masana'anta
Tsanaki! Tsarin dawo da masana'anta zai cire aikin Mawaƙin.
Don mayar da mai sarrafawa zuwa hoton tsohuwar masana'anta:

1. Saka ƙarshen shirin takarda a cikin ƙaramin ramin da ke bayan mai sarrafawa da aka lakafta Sake saitin
2. Latsa ka riƙe Sake saitin maballin. Mai sarrafawa yana sake saiti kuma maɓallin ID ya canza zuwa ja mai ƙarfi.
3. Riƙe maɓallin har sai ID ɗin ya haskaka orange sau biyu. Wannan ya kamata ya ɗauki daƙiƙa biyar zuwa bakwai. Maɓallin ID yana walƙiya orange yayin da masana'anta ke aiki. Lokacin da ya cika, maɓallin ID yana kashe kuma wutar lantarki na na'urar ta sake sake sakewa lokaci guda don kammala aikin dawo da masana'anta.

Lura: Yayin aikin sake saiti, maɓallin ID yana ba da amsa iri ɗaya kamar LED Caution a gaban mai sarrafawa.

Zagayowar wutar lantarki mai sarrafawa
1 Latsa ka riƙe maɓallin ID na daƙiƙa biyar. Mai sarrafawa yana kashewa yana kunnawa.
Sake saita saitunan cibiyar sadarwa
Don sake saita saitunan cibiyar sadarwar mai sarrafawa zuwa tsoho:

1. Cire haɗin wuta zuwa mai sarrafawa.
2. Yayin latsawa da riƙe maɓallin ID a bayan mai sarrafawa, iko akan mai sarrafawa.
3. Riƙe maɓallin ID har sai maɓallin ID ya zama orange mai ƙarfi kuma Lambobin Haɗin kai da Wutar Wuta suna da shuɗi mai ƙarfi, sannan a saki maɓallin nan da nan.
   Lura: Yayin aikin sake saiti, maɓallin ID yana ba da amsa iri ɗaya kamar LED Caution a gaban mai sarrafawa.

Bayanin halin LED

	An kunna kawai
	Boot ya fara
	Boot ya cika
	Duban sake saitin hanyar sadarwa
	Ana ci gaba da dawo da masana'anta (filasha 2 a sakan daya)
	An haɗa shi da Darakta
	Ana kunna sauti
	Ana ɗaukakawa (filashi 1 a cikin daƙiƙa 2)
	Kuskuren sabuntawa (filashi 1 a cikin daƙiƙa 2)
	Babu adireshin IP (filashi 1 a cikin daƙiƙa 2)

Karin taimako
Domin sabuwar sigar wannan takarda da zuwa view ƙarin kayan, buɗe URL kasa ko duba lambar QR akan na'urar da zata iya view PDFs.

http://ctrl4.co/core3-ig	http://ctrl4.co/core

Doka, Garanti, da Ka'idoji/Bayanin Tsaro Ziyara snapone.com/legal don cikakkun bayanai.

Haƙƙin mallaka 2023, Snap One, LLC. An kiyaye duk haƙƙoƙi. Snap One da tambarin sa alamun kasuwanci ne masu rijista ko alamun kasuwanci na Snap One, LLC (wanda aka fi sani da Wire path Home Systems, LLC), a cikin Amurka da/ko wasu ƙasashe. 4Store, 4Sight, Control4, Control4 My Home, Snape, Occupancy, NEEO, OvrC, Waya hanya, da Waya hanya DAYA suma alamun kasuwanci ne masu rijista ko alamun kasuwanci na Snap One, LLC. Ana iya da'awar wasu sunaye da alamun a matsayin mallakin masu su. Snap One bai yi da'awar cewa bayanin da ke ƙunshe ba iko4.com | 888.400.4070 a nan ya ƙunshi duk yanayin shigarwa da abubuwan da ke faruwa, ko haɗarin amfanin samfur. Bayanan da ke cikin wannan ƙayyadaddun bayanai suna canzawa ba tare da sanarwa ba.

B
200-00725-B
2023-07-26 MK

Takardu / Albarkatu

CONTROL4 C4-CORE3 Mai Gudanarwa [pdf] Manual mai amfani C4-CORE3 Mai Gudanarwa, C4-CORE3, Mai Gudanarwa

Magana

• Manual mai amfani