microsonic crm+25-D-TC-E Ultrasonic Sensonic tare da Fitowar Canjawa ɗaya
Bayanin samfur
- Na'urar firikwensin crm+ tare da fitarwa guda ɗaya yana auna nisa zuwa abu a cikin yankin da ba shi da lamba. Dangane da daidaitawar nisan ganowa an saita fitarwar sauyawa.
- Fuskar mai jujjuyawar ultrasonic na na'urori masu auna firikwensin crm+ an lullube shi da fim din PEEK. Mai jujjuyawar kanta tana hatimi a kan gidan ta zoben haɗin gwiwa na PTFE. Wannan abun da ke ciki yana tabbatar da babban juriya ga abubuwa masu yawa masu tayar da hankali.
- Ana yin duk saituna tare da maɓallin turawa biyu da nunin LED mai lamba uku (TouchControl).
- LEDs masu launi uku suna nuna halin sauyawa.
- Ayyukan fitarwa suna canzawa daga NOC zuwa NCC.
- Ana iya daidaita firikwensin da hannu ta hanyar TouchControl ko ta hanyar koyarwa.
- An saita ƙarin ayyuka masu fa'ida a cikin Ƙara-on-menu.
- Amfani da adaftar LinkControl (na'ura na zaɓi) duk TouchControl da ƙarin saitunan sigar firikwensin za a iya daidaita su ta software na Windows®.
Na'urori masu auna firikwensin crm+ suna da yankin makafi wanda auna nisa ba zai yiwu ba. Kewayon aiki yana nuna nisa na firikwensin da za'a iya amfani da shi tare da na'urori na yau da kullun tare da isassun ajiyar aiki. Lokacin amfani da na'urori masu kyau, kamar yanayin ruwa mai natsuwa, ana iya amfani da firikwensin har zuwa iyakar iyakarsa. Abubuwan da ke da ƙarfi (misali kumfa filastik) ko kuma suna nuna sauti sosai (misali duwatsun dutse) kuma na iya rage ƙayyadaddun kewayon aiki.
Bayanan Tsaro
- Karanta umarnin aiki kafin farawa.
- Ƙwararrun ma'aikata kawai za su iya aiwatar da haɗin kai, shigarwa da daidaitawa.
- Babu wani bangaren aminci daidai da umarnin Injin EU, amfani da shi a cikin yanki na kariyar na'ura da ba a yarda da shi ba
Amfani Da Kyau
Ana amfani da na'urori masu auna firikwensin crm + ultrasonic don gano abubuwan da ba a haɗa su ba.
Aiki tare
Idan nisan taro da aka nuna a cikin siffa 1 na na'urori masu auna firikwensin biyu ko fiye da haka ya kamata a yi amfani da haɗin gwiwar aiki tare. Haɗa Sync/Comchannels (fin 5 a raka'a da ake karɓa) na duk firikwensin (mafi girman 10).
Yanayin Multiplex
Ƙara-on-menu yana ba da damar sanya adireshin mutum "01" zuwa "10" ga kowane firikwensin da aka haɗa ta hanyar Sync/Com-channel (Pin5). Na'urori masu auna firikwensin suna yin ma'aunin ultrasonic a jere daga ƙasa zuwa babban adireshin.
Saboda haka duk wani tasiri tsakanin na'urori masu auna firikwensin an ƙi.
Adireshin »00« an tanada don yanayin aiki tare kuma yana kashe yanayin multix. Don amfani da yanayin aiki tare, duk na'urori masu auna firikwensin dole ne a saita su zuwa "00«.
Shigarwa
- Haɗa firikwensin a wurin shigarwa.
- Toshe kebul na haɗin kai zuwa mai haɗin M12, duba Hoto 2.
Farawa
- Haɗa wutar lantarki.
- Saita sigogi na firikwensin da hannu ta hanyar TouchControl (duba siffa 3 da zane 1)
- ko amfani da hanyar Koyarwa don daidaita abubuwan ganowa (duba zane na 2).
Saitin masana'anta
Ana isar da na'urori masu auna firikwensin crm + masana'anta tare da saitunan masu zuwa:
- Canja wurin fitarwa akan NOC
- Gano nisa a kewayon aiki
- An saita kewayon aunawa zuwa iyakar iyaka
Kulawa
crm+ na'urori masu auna firikwensin suna aiki kyauta.
Ƙananan ƙazanta a saman ba sa tasiri aiki. Kauri yadudduka na datti da datti-kan datti suna shafar aikin firikwensin don haka dole ne a cire.
Bayanan kula
- A sakamakon zane taron na PEEK fim da PTFE hadin gwiwa zobe ba gas-proof.
- Dole ne a gwada juriyar sinadarai ta gwaji idan ya cancanta.
- na'urori masu auna firikwensin crm+ suna da ramuwar zafin jiki na ciki. Saboda na'urori masu auna firikwensin suna zafi da kansu, ƙimar zafin jiki ya kai ga mafi kyawun wurin aiki bayan kusan. Minti 30 na aiki.
- Yayin yanayin aiki na yau da kullun, LED D2 mai launin rawaya yana yin sigina cewa fitarwar sauyawa ta haɗa.
- A yayin yanayin aiki na yau da kullun, ƙimar nisa da aka auna yana nunawa akan alamar LED a mm (har zuwa 999 mm) ko cm (daga 100 cm). Sikeli yana canzawa ta atomatik kuma ana nuna shi ta wani batu a saman lambobi.
- Yayin yanayin Koyarwa, ana saita madaukai na hysteresis zuwa saitunan masana'anta.
- Idan babu wani abu da aka sanya a cikin yankin ganowa, alamar LED yana nuna "- - -".
- Idan ba a danna maɓallan turawa na daƙiƙa 20 yayin yanayin saitin sigina an adana canje-canjen da aka yi kuma firikwensin ya koma yanayin aiki na yau da kullun.
- Za a iya sake saita firikwensin zuwa saitin masana'anta, duba "Kulle Maɓalli da saitin masana'anta", Hoto 3.
Nuna sigogi
- A cikin yanayin aiki na yau da kullun danna T1. Nunin LED yana nuna "PAr."
Duk lokacin da ka danna maballin turawa T1 ana nuna ainihin saitunan fitarwa na analog.
Zane na 4: Ƙarin ayyuka masu amfani a menu na Ƙara (ga masu amfani kawai, saitunan da ba a buƙata don daidaitattun aikace-aikace)
| "C01": Nuni mai haske"C02": Nuni dimmed"C03": Nuni a kashe | Ƙimar mafi ƙanƙanta: »001«Mafi girman ƙima: bambanci tsakanin iyakar iyaka da wurin sauyawa - 1 Yayin yanayin yanayin taga aikin hysteresis yana tasiri duka wuraren sauyawa. | "F00": babu tace"F01": daidaitaccen tace"F02": matsakaita tace"F03": tacewa na gaba"F04": tacewa baya | Yana bayyana ƙarfin zaɓaɓɓen tace. »P00«: mai rauni tace har zuwa»P09«: matattara mai ƙarfi | Jinkirta a cikin daƙiƙa tsakanin gano abu da fitowar tazarar da aka auna idan akwai kusancin abu (yana nuna a kan jinkiri). "00": 0 s (babu jinkiri) har zuwa "20": 20 s lokacin amsawa | Mafi ƙarancin ƙima: yankin makafi Madaidaicin ƙima: iyakar tagar kusa - 1 | »00«: aiki tare»01«zuwa»10«: adireshin firikwensin don yanayin multix»oFF«: an kashe aiki tare. | Don inganta saurin multix ana iya saita adireshin firikwensin mafi girma. Saita kewayon "01" zuwa "10" | Ƙimar mafi ƙanƙanta: Iyakar taga firikwensin-nesa Maɗaukakin ƙimar: 999 mm don crm+25/…, crm+35/…, 999 cm don crm+130/…, crm+340/…, crm+600/… | Sanya madubin jirgin sama a tsaye a gaban firikwensin: a daidai nisa na 250 mm don crm + 25… da crm + 35… da 900 mm ga duk sauran nau'ikan. Daidaita nuni zuwa 250 mm ko 900 mm. Tabbatar da daidaitawa tare da T1+T2. | Yana shafar girman yankin ganowa. "E01": babba"E02": misali"E03": kadan | ||
| Yanayin ƙarancin wuta | Hysteresis canza fitarwa | Tace aune | Tace karfi | Lokacin amsawa | Damuwar gaba | Yana magana da na'urar yanayin Multiplex | Mafi girman adireshin Yanayin Multiplex | Kewayon aunawa | nunin daidaitawa | Yankin ganewa | ||
Lura
Canje-canje a menu na Ƙara-kan na iya lalata aikin firikwensin.
A6, A7, A8, A10, A11, A12 suna da tasiri akan lokacin amsawa na firikwensin.
Bayanan fasaha
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| yankin makafi | 0 zuwa 30 mm | 0 bis 85 mm | 0 zuwa 200 mm | 0 zuwa 350 mm | 0 zuwa 600 mm |
| kewayon aiki | mm250 ku | mm350 ku | mm1,300 ku | mm3,400 ku | mm6,000 ku |
| iyakar iyaka | mm350 ku | mm600 ku | mm2,000 ku | mm5,000 ku | mm8,000 ku |
| kwana na katako yada | duba yankin ganowa | duba yankin ganowa | duba yankin ganowa | duba yankin ganowa | duba yankin ganowa |
| mitar transducer | 320 kHz | 360 kHz | 200 kHz | 120 kHz | 80 kHz |
| ƙuduri | mm0.025 ku | mm0.025 ku | mm0.18 ku | mm0.18 ku | mm0.18 ku |
| Yankunan gano abubuwa na abubuwa daban-daban: Yankunan launin toka masu duhu suna wakiltar yankin inda yana da sauƙin gane mai nuni na al'ada (masanin zagaye). Wannan yana nuna yanayin aiki na na'urori masu auna firikwensin. Wuraren launin toka mai haske suna wakiltar yankin inda har yanzu za'a iya gane babban mai nuni - alal misali faranti. Abin da ake bukata anan shine don ingantacciyar daidaitawa zuwa firikwensin. Ba zai yiwu a kimanta tunanin ultrasonic a wajen wannan yanki ba. |  |
 |
 |
 |
 |
| sake haifuwa | ± 0.15% | ± 0.15% | ± 0.15% | ± 0.15% | ± 0.15% |
| daidaito | ± 1 % (Zazzabi mai ɗorewa na ciki, ana iya kashe shi 3), 0.17%/K ba tare da diyya ba) | ± 1 % (Zazzabi mai ɗorewa na ciki, za a kashe shi 3), 0.17%/K ba tare da diyya ba) | ± 1 % (Zazzabi mai ɗorewa na ciki, za a kashe shi 3), 0.17%/K ba tare da diyya ba) | ± 1 % (Zazzabi mai ɗorewa na ciki, za a kashe shi 3), 0.17%/K ba tare da diyya ba) | ± 1 % (Zazzabi mai ɗorewa na ciki, za a kashe shi 3), 0.17%/K ba tare da diyya ba) |
| aiki voltagda UB | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 |
| voltagda rigima | ± 10% | ± 10% | ± 10% | ± 10% | ± 10% |
| babu-load wadata halin yanzu | ≤ 80mA | ≤ 80mA | ≤ 80mA | ≤ 80mA | ≤ 80mA |
| gidaje | Bakin karfe 1.4571, sassan filastik: PBT, TPU; Mai fassara Ultrasonic: Fim ɗin PEEK, PTFE epoxy resin tare da abun ciki na gilashi | Bakin karfe 1.4571, sassan filastik: PBT, TPU; Mai fassara Ultrasonic: Fim ɗin PEEK, PTFE epoxy resin tare da abun ciki na gilashi | Bakin karfe 1.4571, sassan filastik: PBT, TPU; Mai fassara Ultrasonic: Fim ɗin PEEK, PTFE epoxy resin tare da abun ciki na gilashi | Bakin karfe 1.4571, sassan filastik: PBT, TPU; Mai fassara Ultrasonic: Fim ɗin PEEK, PTFE epoxy resin tare da abun ciki na gilashi | Bakin karfe 1.4571, sassan filastik: PBT, TPU; Mai fassara Ultrasonic: Fim ɗin PEEK, PTFE epoxy resin tare da abun ciki na gilashi |
| Tsarin kariya ga EN 60529 | IP67 | IP67 | IP67 | IP67 | IP67 |
| daidaituwar al'ada | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 |
| nau'in haɗin gwiwa | 5-pin initiator toshe, PBT | 5-pin initiator toshe, PBT | 5-pin initiator toshe, PBT | 5-pin initiator toshe, PBT | 5-pin initiator toshe, PBT |
| sarrafawa | 2 maɓallan turawa (TouchControl) | 2 maɓallan turawa (TouchControl) | 2 maɓallan turawa (TouchControl) | 2 maɓallan turawa (TouchControl) | 2 maɓallan turawa (TouchControl) |
| alamomi | Nuni LED mai lamba 3, LED masu launuka uku | Nuni LED mai lamba 3, LED masu launuka uku | Nuni LED mai lamba 3, LED masu launuka uku | Nuni LED mai lamba 3, LED masu launuka uku | Nuni LED mai lamba 3, LED masu launuka uku |
| shirye-shirye | tare da TouchControl da LinkControl | tare da TouchControl da LinkControl | tare da TouchControl da LinkControl | tare da TouchControl da LinkControl | tare da TouchControl da LinkControl |
| zafin aiki | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C |
| zafin jiki na ajiya | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C |
| nauyi | 150g ku | 150g ku | 150g ku | 210g ku | 270g ku |
| canza yanayin hysteresis 1) | mm3 ku | mm5 ku | mm20 ku | mm50 ku | mm100 ku |
| sauyawa mita 2) | 25 Hz | 12 Hz | 8 Hz | 4 Hz | 3 Hz |
| lokacin amsawa 2) | 32 ms | 64 ms | 92 ms | 172 ms | 240 ms |
| jinkirta lokaci kafin samuwa | <300ms | <300ms | <300ms | <380 ms | <450 ms |
| oda A'a. | crm+25/D/TC/E | crm+35/D/TC/E | crm+130/D/TC/E | crm+340/D/TC/E | crm+600/D/TC/E |
| fitarwa fitarwa | pnp, UB - 2 V, Imax = 200mA mai canzawa NOC/NCC, tabbataccen gajeriyar kewayawa | pnp, UB - 2 V, Imax = 200mA mai canzawa NOC/NCC, tabbataccen gajeriyar kewayawa | pnp, UB - 2 V, Imax = 200mA mai canzawa NOC/NCC, tabbataccen gajeriyar kewayawa | pnp, UB - 2 V, Imax = 200mA mai canzawa NOC/NCC, tabbataccen gajeriyar kewayawa | pnp, UB - 2 V, Imax = 200mA mai canzawa NOC/NCC, tabbataccen gajeriyar kewayawa |
- Ana iya shirya ta hanyar TouchControl da LinkControl.
- Tare da TouchControl da LinkControl, saitin tacewa da aka zaɓa da matsakaicin iyaka yana rinjayar mitar sauyawa da lokacin amsawa.
- Ana iya kashewa ta hanyar LinkControl.
Nau'in Rukuni na 1
Don amfani kawai a cikin injunan masana'antu NFPA 79 aikace-aikacen.
Za a yi amfani da maɓallan kusanci tare da kebul da aka jera (CYJV/7) na USB/mahadar haɗin da aka ƙididdige mafi ƙarancin 32 Vdc, mafi ƙarancin 290 mA, a cikin shigarwa na ƙarshe.
Sabis na Abokin Ciniki
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jamus
T + 49 231 975151-0
F +49 231 975151-51
E info@microsonic.de
W microsonic.de
Abubuwan da ke cikin wannan takarda yana ƙarƙashin canje-canjen fasaha. Ana gabatar da ƙayyadaddun ƙayyadaddun bayanai a cikin wannan takaddar ta hanyar siffantawa kawai. Ba su da garantin kowane fasalin samfur.
Takardu / Albarkatu
 |
microsonic crm+25-D-TC-E Ultrasonic Sensonic tare da Fitowar Canjawa ɗaya [pdf] Manual mai amfani crm 25-D-TC-E, crm 35-D-TC-E, crm 130-D-TC-E, crm 340-D-TC-E, crm 600-D-TC-E, crm 25-D- TC-E Ultrasonic Sensors tare da Fitowar Canjawa ɗaya, crm 25-D-TC-E, Sensor Ultrasonic tare da Fitowar Canjawa ɗaya, Na'urori masu auna firikwensin, Na'urar firikwensin Ultrasonic |
 |
microsonic crm+25-D-TC-E Ultrasonic Sensonic Tare da Fitowar Canjawa Daya [pdf] Jagoran Jagora crm 25-D-TC-E, crm 35-D-TC-E, crm 130-D-TC-E, crm 340-D-TC-E, crm 600-D-TC-E, crm 25-D- TC-E Ultrasonic Sensors Tare da Fitowar Canjawa ɗaya, crm 25-D-TC-E, Na'urar firikwensin Ultrasonic Tare da Fitowar Canjawa ɗaya, Sensors Tare da Fitowar Canjawa ɗaya, Fitowar Canjawa ɗaya, Sauya Fitowa, Fitowa |
