microsonic mic Ultrasonic Sensors tare da Fitar da Sauyawa Biyu
mic Ultrasonic Sensors tare da fitarwa biyu na sauyawa
Bayanin samfur
Sensor mic-sensor tare da fitowar sauyawa guda biyu yana auna nisa zuwa abu a cikin yankin da ba shi da lamba. Dangane da gyare-gyaren gano nisa an saita fitattun abubuwan juyawa. Ayyukan fitarwa suna canzawa daga NOC zuwa NCC.
Amfani da adaftar LinkControl (na'ura mai kyau) duk saitunan sigar firikwensin za a iya daidaita su ta software na Windows ®. Bayanan tsaro Ԏ Karanta littafin aiki kafin farawa. Ƙwararrun ma'aikata za su iya aiwatar da haɗin kai, shigarwa da daidaitawa kawai. auna ba zai yiwu ba. Kewayon aiki yana nuna nisa na firikwensin da za'a iya amfani da shi tare da na'urori na yau da kullun tare da isassun ajiyar aiki. Lokacin amfani da na'urori masu kyau, kamar yanayin ruwa mai natsuwa, ana iya amfani da firikwensin har zuwa iyakar iyakarsa. Abubuwan da ke da ƙarfi (misali kumfa filastik) ko kuma suna nuna sauti sosai (misali duwatsun dutse) kuma na iya rage ƙayyadaddun kewayon aiki.
→ Shigarwa Î Haɗa firikwensin a wurin shigarwa.
→ Toshe kebul na haɗin kai zuwa mahaɗin M12, duba Hoto 1.
 |
 |
launi |
| 1 | +UB | launin ruwan kasa |
| 3 | –UB | blue |
| 4 | D2 | baki |
| 2 | D1 | fari |
| 5 | Daidaitawa/Com | launin toka |
Siffa 1: Pin aiki tare da view a kan filogi na firikwensin da lambar launi na kebul na haɗin microsonic
Farawa
→ Haɗa wutar lantarki.
→ Sanya sigogi na firikwensin ta amfani da adaftar LinkControl LCA-2 tare da software na LinkControl.
Saitin masana'anta
- Ana isar da mic-sensors masana'anta da aka yi tare da saitunan masu zuwa:
- Canja wurin fitarwa akan NOC
- Gano nisa a kewayon aiki da rabin kewayon aiki Mafi girman kewayon ganowa saita zuwa matsakaicin kewayo
Aiki tare
Idan nisan taron da aka nuna a cikin siffa 2 na na'urori masu auna firikwensin biyu ko fiye da haka ya kamata a yi amfani da haɗin gwiwar aiki tare. Haɗa fil 5 (Sync/com) na duk firikwensin (mafi girman 10).
 |
 |
|
|
mic-25… |
<10 cm | <1.0m |
| mic-35… | <30 cm | <1.7m |
| mic-130… | <60 cm | <5.4m |
| mic-340… | <1.6m | <16m |
| mic-600… | <2.6m | <30m |
Yanayin Multiplex
Na'urori masu auna firikwensin da aka haɗa ta hanyar lantarki ta hanyar fil 5 (Sync / Com) kuma ana iya sanya adireshin na'ura guda ɗaya tsakanin "01" da "10" tare da Gudanarwar Link. Sai na'urori masu auna firikwensin su canza tare da ma'aunin su na ultrasonic yayin aiki a cikin jerin adiresoshin na'urar. Wannan gaba ɗaya yana guje wa tsoma baki tsakanin na'urori masu auna firikwensin. Adireshin na'urar "00" an tanada shi don aiki tare kuma yana kashe aikin multix. Don aiki tare, duk na'urori masu auna firikwensin dole ne su sami adireshin na'urar "00«.
Kulawa
mic-sensors suna aiki kyauta. Ƙananan ƙazanta a saman ba sa tasiri aiki. Kauri yadudduka na datti da datti-kan datti suna shafar aikin firikwensin don haka dole ne a cire.
Lura
mic firikwensin suna da ramuwar yanayin zafi na ciki. Saboda dumama kai na firikwensin, ramuwar zafin jiki ya kai ga mafi kyawun wurin aiki bayan kusan. Mintuna 30 na aiki.
Bayanan fasaha
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
| yankin makafi | 0 zuwa 30 mm | 0 zuwa 65 mm | 0 zuwa 200 mm | 0 zuwa 350 mm | 0 zuwa 600 mm |
| kewayon aiki | mm250 ku | mm350 ku | mm1,300 ku | mm3,400 ku | mm6,000 ku |
| iyakar iyaka | mm350 ku | duba yankin ganowa | mm2,000 ku | mm5,000 ku | mm8,000 ku |
| kwana na katako yada | duba yankin ganowa | 400 kHz | duba yankin ganowa | duba yankin ganowa | duba yankin ganowa |
| mitar transducer | 320 kHz | mm0.18 ku | 200 kHz | 120 kHz | 80 kHz |
| ƙuduri | mm0.18 ku | ± 0.15% | mm0.18 ku | mm0.18 ku | mm0.18 ku |
| sake haifuwa | ± 0.15% | Matsakaicin zafin jiki wanda aka biya diyya, ≤2%, maiyuwa | ± 0.15% | ± 0.15% | ± 0.15% |
| daidaito | Matsakaicin zafin jiki wanda aka biya, ≤2%, ana iya kashe shi 1) (0.17%/K ba tare da diyya ba) | a kashe 1) (0.17%/K ba tare da ramuwa ba) | Matsakaicin zafin jiki wanda aka biya diyya, ≤2%, maiyuwa a kashe 1) (0.17%/K ba tare da ramuwa ba) |
Matsakaicin zafin jiki wanda aka biya diyya, ≤2%, maiyuwa a kashe 1) (0.17%/K ba tare da ramuwa ba) |
Matsakaicin zafin jiki wanda aka biya diyya, ≤2%, maiyuwa a kashe 1) (0.17%/K ba tare da ramuwa ba) |
| Yankunan gano abubuwa na abubuwa daban-daban: Yankunan launin toka masu duhu suna wakiltar yankin inda yana da sauƙin gane mai nuni na al'ada (masanin zagaye). Wannan yana nuna yanayin aiki na na'urori masu auna firikwensin. Wuraren launin toka mai haske suna wakiltar yankin inda har yanzu za'a iya gane babban mai nuni - alal misali faranti. Abin da ake bukata anan shine don ingantacciyar daidaitawa zuwa firikwensin. Ba zai yiwu a kimanta tunanin ultrasonic a wajen wannan yanki ba. |  |
 |
 |
 |
 |
| aiki voltagda UB | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 | 9 zuwa 30V DC, proof-circuit, Class 2 |
| voltagda rigima | ± 10% | ± 10% | ± 10% | ± 10% | ± 10% |
| babu-load wadata halin yanzu | ≤55 mA | ≤55 mA | ≤55 mA | ≤55 mA | ≤55 mA |
| gidaje | Hannun Brass, Plated nickel, sassa na filastik: PBT | Hannun tagulla, nickel-plated, sassa na filastik: PBT; | Hannun tagulla, nickel-plated, sassa na filastik: PBT; | Hannun tagulla, nickel-plated, sassa na filastik: PBT; | Hannun tagulla, nickel-plated, sassa na filastik: PBT; |
| Ultrasonic transducer: kumfa polyurethane, | Ultrasonic transducer: polyurethane kumfa | Ultrasonic transducer: kumfa polyurethane, | Ultrasonic transducer: kumfa polyurethane, | Ultrasonic transducer: kumfa polyurethane, | |
| epoxy guduro tare da gilashin abun ciki | epoxy guduro tare da gilashin abun ciki | epoxy guduro tare da gilashin abun ciki | epoxy guduro tare da gilashin abun ciki | epoxy guduro tare da gilashin abun ciki | |
| Tsarin kariya ga EN 60529 | 9 IP67 | IP67 | IP67 | IP67 | IP67 |
| daidaituwar al'ada | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 | TS EN 60947-5-2 |
| nau'in haɗin gwiwa | 5-pin initiator toshe, Brass, nickel-plated | 5-pin initiator toshe, Brass, nickel-plated | 5-pin initiator toshe, Brass, nickel-plated | 5-pin initiator toshe, Brass, nickel-plated | 5-pin initiator toshe, Brass, nickel-plated |
| shirye-shirye | ta hanyar LinkControl | ta hanyar LinkControl | ta hanyar LinkControl | ta hanyar LinkContro | ta hanyar LinkControl |
| zafin aiki | –25 zuwa + 70 ° C | l ta hanyar LinkControl ta hanyar LinkControl ta hanyar LinkControl zafin aiki -25 zuwa + 70 ° C -25 zuwa + 70 ° C | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C |
| zafin jiki na ajiya | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C |
| nauyi | 200g ku | 200g ku | 200g ku | 260g ku | 320g ku |
| canza yanayin hysteresis 1) | mm3 ku | mm5 ku | mm20 ku | mm50 ku | mm100 ku |
| sauyawa mita 1) | 11 Hz | 8 Hz | 6 Hz | 3 Hz | 2 Hz |
| lokacin amsawa 1) | 50 ms | 70 ms | 110 ms | 180 ms | 240 ms |
| jinkirin lokaci kafin samuwa 1) | mic-35/DD/M | mic-130/DD/M | mic-340/DD/M | mic-600/DD/M | |
| oda A'a. | mic-25/DD/M | 2x pnp, UB – 2V, Imax = 2x 200mA | 2x pnp, UB – 2V, Imax = 2x 200mA | 2x pnp, UB – 2V, Imax = 2x 200mA | 2x pnp, UB – 2V, Imax = 2x 200mA |
| fitarwa fitarwa | t 2x pnp, UB - 2 V, Imax = 2x 200 mA | NOC/NCC mai sauya sheka, tabbacin gajeriyar kewayawa | NOC/NCC mai sauya sheka, tabbacin gajeriyar kewayawa | NOC/NCC mai sauya sheka, tabbacin gajeriyar kewayawa | NOC/NCC mai sauya sheka, tabbacin gajeriyar kewayawa |
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jamus /
T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Abubuwan da ke cikin wannan takarda yana ƙarƙashin canje-canjen fasaha. Ana gabatar da ƙayyadaddun ƙayyadaddun bayanai a cikin wannan takaddar ta hanyar siffantawa kawai. Ba su da garantin kowane fasalin samfur.
asarar Nau'in 1 Don amfani kawai a cikin injunan masana'antu NFPA 79 aikace-aikace. Za'a yi amfani da maɓallan kusanci tare da kebul da aka jera (CYJV/7) na USB/mahadar haɗin haɗin da aka ƙididdige mini -mum 32 Vdc, ƙaramar 290 mA, a cikin shigarwa na ƙarshe.
Takardu / Albarkatu
 |
microsonic mic Ultrasonic Sensors tare da Fitar da Sauyawa Biyu [pdf] Jagoran Jagora mic-25-DD-M, mic-35-DD-M, mic-130-DD-M, mic-340-DD-M, mic-600-DD-M, mic Ultrasonic Sensors tare da Sauyawa Biyu, mic Ultrasonic Na'urori masu auna firikwensin, na'urar firikwensin Ultrasonic, na'urar firikwensin Ultrasonic tare da Fitar Sauyawa Biyu |
