MICROCHIP H.264 Encoder

Gabatarwa
H.264 sanannen ma'aunin matsi na bidiyo ne don matsawa na bidiyo na dijital. An kuma san shi da MPEG-4 Part10 ko Advanced Video coding (MPEG-4 AVC). H.264 yana amfani da tsarin dabara don matsawa bidiyo inda aka bayyana girman toshe a matsayin 16 x 16 kuma ana kiransa macro block. Matsayin matsawa yana goyan bayan nau'ikan profiles wanda ke ayyana ma'aunin matsawa da rikitarwa na aiwatarwa. Firam ɗin bidiyo, da za a matsa, ana ɗaukar su azaman I frame, firam ɗin P, da firam ɗin B. I firam ɗin firam ne mai lamba inda ake yin matsawa ta amfani da bayanan da ke cikin firam ɗin. Babu wasu firam ɗin da ake buƙata don yanke lambar I. An danne firam ɗin AP ta amfani da canje-canje dangane da firam ɗin farko wanda zai iya zama firam ɗin I ko firam ɗin P. Ana yin matsewar firam ɗin B ta amfani da canje-canjen motsi dangane da firam ɗin farko da firam mai zuwa.

Tsarin matsawar firam na I da P yana da s huɗutage:

• Hasashen Intra/Inter
• Canjin lamba
• Ƙididdigewa
• Entropy encoding

H. 264 yana goyan bayan nau'ikan ɓoyewa iri biyu:

• Ƙididdigar Tsawon Tsawon Ma'anar Ma'ana (CAVLC)
• Ƙididdigar Ƙididdigar Ƙididdigar Ƙididdigar Ƙididdigar Ƙira (CABAC)

Sigar na yanzu na H.264 Encoder yana aiwatar da tushen tushen profile kuma yana amfani da CAVLC don shigar da entropy. Hakanan, H.264 Encoder yana goyan bayan shigar da firam ɗin I da P.

Hoto 1. H.264 Encoder Block zane

Siffofin

H. 264 Encoder yana da maɓalli masu zuwa:

• Yana matsawa tsarin bidiyo na YCbCr 420
• Yana karɓar tsarin bidiyo na YCbCr 422 azaman shigarwa
• Yana goyan bayan 8-bit ga kowane bangare (Y, Cb, da Cr)
• Yana goyan bayan ITU-T H.264 Annex B mai dacewa da fitowar rafi NAL byte
• Yana aiki ba tare da aiki na tsaye ba, CPU, ko taimakon mai sarrafawa ba a buƙata ba
• Yana goyan bayan ingancin ingancin mai daidaitawa (QP)
• Yana goyan bayan Ƙididdigar Frame P (PCOUNT)
• Yana goyan bayan ƙimar daidaitawar mai amfani don toshe tsallake-tsallake
• Yana goyan bayan ƙididdigewa a ƙimar pixel ɗaya kowace agogo
• Yana goyan bayan matsawa har zuwa ƙudurin 1080p 60fps
• Yana amfani da mahallin mahaɗar bidiyo don samun dama ga masu buffer firam na DDR
• Ƙananan latency (252 µs don cikakken HD ko 17 layi a kwance)

Iyalai masu tallafi

H. 264 Encoder yana goyan bayan iyalai samfurin masu zuwa:

• PolarFire® SoC
• PolarFire

Aiwatar Hardware

Wannan sashe yana bayyana daban-daban na ciki na H.264 Encoder. Shigar da bayanai zuwa H.264 Encoder dole ne ya kasance a cikin sigar hoton raster a cikin tsarin YCbCr 422. H.264 Encoder yana amfani da tsari 422 azaman shigarwa kuma yana aiwatar da matsawa cikin tsari 420.
Hoton da ke gaba yana nuna hoton toshe H.264 Encoder.

Hoto na 1-1. H.264 Encoder – Modules

1. Intra Hasashen
   H.264 yana amfani da hanyoyi daban-daban na intra- tsinkaya don rage bayanin a cikin toshe 4 x 4. Toshe intra- tsinkaya a cikin IP yana amfani da tsinkayar DC kawai akan girman matrix 4 x 4. Ana lissafta bangaren DC daga saman kusa da hagu 4 x 4 tubalan.
2. Canjin lamba
   H.264 yana amfani da juzu'in juzu'i mai ma'ana inda aka rarraba ma'auni a cikin matrix canza matrix da matrix mai ƙididdigewa ta yadda babu ninka ko rarrabuwa a cikin canjin lamba. Canjin lamba stage aiwatar da canji ta amfani da motsi da ƙara ayyuka.
3. Ƙididdigewa
   Ƙididdigar ƙididdigewa tana ninka kowane fitarwa na canjin lamba tare da ƙayyadaddun ƙimar ƙididdigewa wanda ƙimar shigarwar mai amfani ta QP ta ayyana. Matsakaicin ƙimar QP daga 0 zuwa 51. Duk wani darajar fiye da 51 shine clamped zuwa 51. Ƙananan ƙimar QP yana nuna ƙananan matsawa da inganci mafi girma kuma akasin haka.
4. Ƙimar Motsi
   Ƙimar Motsi yana bincika 8 x 8 toshe na firam na yanzu a cikin shingen 16 x 16 na firam ɗin da ya gabata kuma yana haifar da motsin motsi.
5. Kudin Motsi
   Rarraba Motion yana samun motsin motsi daga toshe Ƙimar Motion kuma ya nemo madaidaicin toshe 8 x 8 a cikin firam ɗin da ya gabata.
6. CAVLC
   H.264 yana amfani da nau'ikan entropy iri biyu-CAVLC da CABAC. IP ɗin yana amfani da CAVLC don ɓoye abubuwan da aka ƙididdige su.
7. Babban Generator
   Toshe janareta na kan kai yana haifar da toshe kanun labarai, masu kan yanki, Sequence Parameter Set (SPS), Saitin Parameter Set (PPS), da naúrar Abstraction Layer (NAL) dangane da misalin firam ɗin bidiyo. Tsallake toshe dabaru dabaru na ƙididdige Jimlar Cikakkar Bambanci (SAD) na firam na yanzu 16 x 16 macro block da firam ɗin da ya gabata 16 x 16 macro block daga wurin motsi vector annabta. An yanke shawarar shingen tsallakewa ta amfani da ƙimar SAD da shigarwar SKIP_THRESHOLD.
8. H.264 Rarraba Generator
   H.264 rafi janareta block hadawa CAVLC fitarwa tare da headers don ƙirƙirar encoded fitarwa kamar yadda H.264 misali format.
9. DDR Rubuta Channel kuma Karanta Channel
   H.264 Encoder yana buƙatar ƙaddamar da firam ɗin don adana shi a ƙwaƙwalwar DDR, wanda ake amfani da shi a cikin tsinkayar Inter. The
   IP yana amfani da DDR rubuta da karanta tashoshi don haɗawa da Video Arbiter IP, wanda ke hulɗa tare da ƙwaƙwalwar DDR ta hanyar IP mai sarrafa DDR.

Abubuwan shigarwa da fitarwa

Wannan sashe yana bayyana abubuwan da aka shigar da abubuwan da aka fitar na H.264 Encoder.

Tashoshi
Tebur masu zuwa suna lissafin bayanin shigarwar da tashoshin fitarwa na H.264 Encoder.

Tebur 2-1. Abubuwan shigarwa da abubuwan da aka fitar na H.264 Encoder

Sunan siginar	Hanyar	Nisa	Bayani
DDR_CLK_I	Shigarwa	1	DDR memory agogon
PIX_CLK_I	Shigarwa	1	Agogon shigarwa wanda pixels masu shigowa suke sampjagoranci
SAKETA_N	Shigarwa	1	Siginar sake saitin asynchronous-ƙananan aiki zuwa ƙira
DATA_VALID_I	Shigarwa	1	Shigar da bayanan Pixel ingantaccen sigina
DATA_Y_I	Shigarwa	8	8-bit Luma pixel shigarwar a cikin tsari 422
DATA_C_I	Shigarwa	8	Shigar da pixel 8-bit Chroma a cikin tsari 422
FRAME_START_I	Shigarwa	1	Alamar Farawa Ana ɗaukar gefen haɓakar wannan siginar azaman farkon firam.
FRAME_END_I	Shigarwa	1	Alamar Ƙarshen Frame
DDR_FRAME_START_ADDR_I	Shigarwa	8	Adireshin farawa ƙwaƙwalwar DDR (LSB 24-bits sune 0) don adana firam ɗin da aka sake ginawa. H.264 IP zai adana firam 4 kuma zai yi amfani da 64 MB na ƙwaƙwalwar DDR.
I_FRAME_FORCE_I	Shigarwa	1	Mai amfani na iya tilastawa I frame a kowane lokaci. Siginar bugun jini ce.
PCOUNT_I	Shigarwa	8	Adadin firam ɗin P akan kowane I firam 422 ƙimar ƙima daga 0 zuwa 255.
QP	Shigarwa	6	Quality factor for H.264 quantization 422 fornat darajar jeri daga 0 zuwa 51 inda 0 wakiltar mafi inganci da mafi ƙasƙanci matsawa da 51 wakiltar mafi girma matsawa.
SKIP_THRESHOLD_I	Shigarwa	12	Ƙofar don tsallake yanke shawara Wannan ƙimar tana wakiltar ƙimar SAD na 16 x 16 Macro block don tsallakewa. Matsakaicin yana daga 0 zuwa 1024, tare da ƙima na yau da kullun 512. Maɗaukakin ƙofa yana samar da ƙarin shingen tsallakewa da ƙarancin inganci.
VRES_I	Shigarwa	16	Matsakaicin ƙudurin shigar da hoton. Dole ne ya zama mai yawa na 16.
HRES_I	Shigarwa	16	Matsakaicin ƙudurin shigarwar hoto. Dole ne ya zama mai yawa na 16.
DATA_VALID_O	Fitowa	1	Alamar da ke nuna rufaffiyar bayanan yana aiki.

DATA_O	Fitowa	16	H.264 faifan fitar da bayanai wanda ya ƙunshi naúrar NAL, yanki guda, SPS, PPS, da bayanan ɓoye na macro blocks.
RUBUTA_ CHANNEL_BUS	—	—	Rubuta tashar bas ɗin da za a haɗa tare da Mai daidaita Bidiyo Rubuta bas ɗin tashar. Wannan yana samuwa lokacin da aka zaɓi hanyar haɗin bas don Interface Arbiter.
KARANTA_CHANNEL_BUS	—	—	Karanta tashar bas ɗin da za a haɗa tare da mai yanke hukunci na Bidiyo Karanta bas ɗin tashar. Wannan yana samuwa lokacin da aka zaɓi hanyar haɗin bas don Interface Arbiter.
DDR Rubuta 'Yan Asalin IDAN-Wadannan tashoshin jiragen ruwa suna samuwa lokacin da aka zaɓi mahaɗin ɗan ƙasa don Interface Arbiter.
DDR_WRITE_ACK_I	Shigarwa	1	Rubuta sanarwa daga tashar rubutaccen hukunci.
DDR_WRITE_DONE_I	Shigarwa	1	Rubuta kammala daga mai yanke hukunci.
DDR_WRITE_REQ_O	Fitowa	1	Rubuta roƙo ga mai sasantawa.
DDR_WRITE_START_ADDR_O	Fitowa	32	adireshin DDR wanda dole ne a rubuta shi.
DDR_WBURST_SIZE_O	Fitowa	8	DDR rubuta girman fashe.
DDR_WDATA_VALID_O	Fitowa	1	Bayanai suna aiki ga mai yanke hukunci.
DDR_WDATA_O	Fitowa	DDR_AXI_DATA_WIDTH	Fitowar bayanai zuwa mai yanke hukunci.
DDR Karanta 'Yan Asalin IDAN-Wadannan tashoshin jiragen ruwa suna samuwa lokacin da aka zaɓi mahaɗin ɗan ƙasa don Interface Arbiter.
DDR_READ_ACK_I	Shigarwa	1	Karanta yarda daga tashar karanta masu yanke hukunci.
DDR_KARATUN_I	Shigarwa	1	Karanta kammala daga mai yanke hukunci.
DDR_RDATA_VALID_I	Shigarwa	1	Bayanai suna aiki daga mai yanke hukunci.
DDR_RDATA_I	Shigarwa	DDR_AXI_DATA_WIDTH	Shigar da bayanai daga mai sasantawa.
DDR_READ_REQ_O	Fitowa	1	Karanta roƙo ga mai yanke hukunci.
DDR_READ_START_ADDR_O	Fitowa	32	DDR address daga inda za a karanta.
DDR_RBURST_SIZE_O	Fitowa	8	DDR karanta girman fashe.

Matsalolin agogo

H.264 Encoder IP yana amfani da abubuwan shigar agogon PIX_CLK_I da DDR_CLK_I. Yi amfani da ƙuntatawa na haɗa agogo don wuri da kewayawa da kuma tabbatar da lokaci yayin da IP ke aiwatar da dabarun wucewar yankin agogo.

Umarnin Shigarwa

H. 264 Encoder core dole ne a shigar da shi zuwa kasidar IP na software na Libero® SoC. Ana yin wannan ta atomatik ta aikin sabuntawar Catalog na IP a cikin software na Libero SoC, ko kuma ana iya saukar da ainihin IP da hannu daga kasidar. Da zarar an shigar da ainihin IP a cikin software na Libero SoC IP Catalog, za a iya daidaita ainihin, ƙirƙira, da kuma tatsa cikin SmartDesign don haɗawa cikin aikin Libero.

Testbench

An bayar da Testbench don duba ayyukan H.264 Encoder IP.

1. kwaikwayo
   Simulation yana amfani da hoton 432 × 240 a cikin tsarin YCbCr422 wanda biyu ke wakilta. files, kowane don Y da C azaman shigarwa
   kuma yana haifar da H.264 file tsari mai dauke da firam biyu. Matakan da ke gaba suna bayyana yadda ake kwaikwayi ainihin abin da ake amfani da shi ta amfani da testbench.
   1. Je zuwa Labero SoC Catalog> View > Windows > Catalog, sannan fadada Magani-Video. Danna H264_Encoder sau biyu, sannan danna Ok.
   2. Don samar da SmartDesign da ake buƙata don H.264 Encoder IP simulation, danna Ayyukan Libero> Aiwatar da rubutun. Bincika zuwa rubutun ..\ \bangaren\MicrochipSolutionCoreH264_Encoder\ \scripts\H264_SD.tcl, sannan danna Run .
      Hoto na 5-2. Gudanar da Rubutun Rubutun
      Tsohuwar AXI data bas nisa shine 512. Idan H.264 Encoder IP an saita don 256/128 bas nisa, rubuta AXI_DATA_WIDTH:256 ko AXI_DATA_WIDTH:128 a cikin muhawara filin.
      SmartDesign yana bayyana. Dubi adadi mai zuwa.
      Hoto na 5-3. Babban SmartDesign
   3. A kan Files shafin, danna simulation > Shigo Files.
      Hoto na 5-4. Shigo da Files
   4. Shigo da H264_sim_data_in_y.txt, H264_sim_data_in_c.txt file da H264_sim_refOut.txt file daga hanya mai zuwa: ..\ \bangaren\MicrochipSolutionCoreH264_Encoder\ \ Abin kara kuzari.
   5. Don shigo da wani daban file, bincika babban fayil ɗin da ya ƙunshi abin da ake buƙata file, kuma danna Buɗe. The shigo da file An jera a ƙarƙashin simulation, duba adadi mai zuwa.
   6. A shafin Stimulus Hierarchy, danna H264_Encoder_tb (H264_Encoder_tb. v)> Kwaikwayi Pre-Synth Design> Buɗe Interactively. An ƙirƙira IP ɗin don firam biyu. Hoto na 5-6. Simulating Pre-Synthesis Design
      ModelSim yana buɗewa tare da bench file kamar yadda aka nuna a adadi mai zuwa.

Muhimmi: Idan an katse simulation saboda iyakar lokacin gudu da aka ƙayyade a cikin DO file, yi amfani da run-duk umarnin don kammala simulation.

Amfani da Albarkatu

H. 264 Encoder ana aiwatar da shi a cikin PolarFire SoC FPGA (kunshin MPFS250T-1FCG1152I) kuma yana haifar da matsa lamba ta amfani da 4: 2: 2 sampling na shigar data.

Table 6-1. Amfani da albarkatu don H.264 Encoder

Albarkatu	Amfani
4 Teburan Dubawa (LUTs)	69092
D Flip Flops (DFFs)	65522
Ƙwaƙwalwar Ƙwaƙwalwar Samun Bazuwar Bazuwar (LSRAM)	232
uSRAM	30
Toshe lissafi	19
Interface 4-shigarwar LUTs	9396
Interface DFFs	9396

Ma'aunin Kanfigareshan

Tebur mai zuwa yana lissafin bayanin sigogin daidaitawa na gama gari da aka yi amfani da su a cikin aiwatar da kayan aikin H.264 Encoder, wanda zai iya bambanta dangane da buƙatun aikace-aikacen.

Tebur 7-1. Ma'aunin Kanfigareshan

Suna	Bayani
DDR_AXI_DATA_WIDTH	Yana bayyana faɗin bayanan DDR AXI. Yana iya zama 128, 256, ko 512
ARBITER_INTERFACE	Zaɓin zaɓin ɗan ƙasa ko ƙirar motar bas don haɗawa da IP mai yanke hukunci na bidiyo

IP Configurator
Hoto mai zuwa yana nuna mai daidaitawa na H.264 Encoder IP.

Hoto na 7-1. H.264 Mai Haɓakawa Mai Rikodi

Lasisi
An samar da Encoder H. 264 a cikin rufaffen tsari kawai ƙarƙashin lasisi.
Rufaffen lambar tushen RTL kulle-kulle ne kuma dole ne a siya daban. Kuna iya yin simulation, haɗawa, shimfidawa, da tsara silikon Field Programmable Gate Array (FPGA) ta amfani da ɗakin ƙirar Libero.
An bayar da lasisin kimantawa kyauta don duba fasalulluka na Encoder H.264. Lasisin kimantawa zai ƙare bayan amfani da sa'a guda akan kayan aikin.

Tarihin Bita

Tarihin bita ya bayyana canje-canjen da aka aiwatar a cikin takaddar. Canje-canjen an jera su ta bita, farawa da mafi kyawun ɗaba'ar.

Table 9-1. Tarihin Bita

Bita	Kwanan wata	Bayani
B	09/2022	• An sabunta Siffofin sashe. • An sabunta nisa na siginar fitarwa na DATA_O daga 8 zuwa 16, duba Table 2-1. • An sabunta Hoto na 7-1. • An sabunta 8. Lasisi sashe. • An sabunta 6. Amfani da Albarkatu sashe. • An sabunta Hoto na 5-3.
A	07/2022	Sakin farko.

Ƙungiyar samfuran Microchip FPGA tana goyan bayan samfuran ta tare da sabis na tallafi daban-daban, gami da Sabis na Abokin Ciniki, Cibiyar Tallafin Fasaha ta Abokin Ciniki, a website, da ofisoshin tallace-tallace na duniya. Ana ba abokan ciniki shawarar ziyartar albarkatun kan layi na Microchip kafin tuntuɓar tallafi saboda da yuwuwar an riga an amsa tambayoyinsu.

Tuntuɓi Cibiyar Tallafawa Fasaha ta hanyar websaiti a www.microchip.com/support. Ambaci lambar Sashe na Na'urar FPGA, zaɓi nau'in shari'ar da ta dace, da ƙaddamar da ƙira files yayin ƙirƙirar shari'ar tallafin fasaha.
Tuntuɓi Sabis na Abokin Ciniki don tallafin samfur mara fasaha, kamar farashin samfur, haɓaka samfur, sabunta bayanai, matsayin tsari, da izini.

• Daga Arewacin Amirka, kira 800.262.1060
• Daga sauran duniya, kira 650.318.4460
• Fax, daga ko'ina cikin duniya, 650.318.8044

Bayanin Microchip

Microchip Website

Microchip yana ba da tallafin kan layi ta hanyar mu webYanar Gizo a www.microchip.com/. Wannan webana amfani da site don yin files da bayanai cikin sauƙin samuwa ga abokan ciniki. Wasu daga cikin abubuwan da ake samu sun haɗa da:

• Tallafin samfur - Taswirar bayanai da errata, bayanin kula da aikace-aikace da sampshirye-shirye, albarkatun ƙira, jagororin mai amfani da takaddun tallafi na hardware, sabbin fitattun software da software da aka adana
• Gabaɗaya Taimakon Fasaha - Tambayoyin da ake Yi akai-akai (FAQs), buƙatun tallafin fasaha, ƙungiyoyin tattaunawa kan layi, jerin membobin shirin abokan hulɗa na Microchip
• Kasuwancin Microchip - Mai zaɓin samfur da jagororin ba da oda, sabbin fitowar manema labarai na Microchip, jerin tarukan karawa juna sani da abubuwan da suka faru, jerin ofisoshin tallace-tallace na Microchip, masu rarrabawa da wakilan masana'anta

Sabis ɗin Sanarwa Canjin samfur

Sabis ɗin sanarwar canjin samfur na Microchip yana taimakawa abokan ciniki su kasance a halin yanzu akan samfuran Microchip. Masu biyan kuɗi za su karɓi sanarwar imel a duk lokacin da aka sami canje-canje, sabuntawa, bita ko ƙirƙira masu alaƙa da ƙayyadadden dangin samfur ko kayan aikin haɓaka na ban sha'awa.
Don yin rajista, je zuwa www.microchip.com/pcn kuma bi umarnin rajista.

Tallafin Abokin Ciniki

Masu amfani da samfuran Microchip na iya samun taimako ta hanyoyi da yawa:

• Mai Rarraba ko Wakili
• Ofishin Talla na Gida
• Injiniyan Magance Ciki (ESE)
• Goyon bayan sana'a

Abokan ciniki yakamata su tuntuɓi mai rarraba su, wakilin ko ESE don tallafi. Hakanan akwai ofisoshin tallace-tallace na gida don taimakawa abokan ciniki. An haɗa lissafin ofisoshin tallace-tallace da wurare a cikin wannan takarda.
Ana samun tallafin fasaha ta hanyar websaiti a: www.microchip.com/support

Siffar Kariyar Lambar Na'urorin Microchip
Kula da cikakkun bayanai masu zuwa na fasalin kariyar lambar akan samfuran Microchip:

• Samfuran Microchip sun haɗu da ƙayyadaddun bayanai da ke ƙunshe a cikin takamaiman takaddar bayanan Microchip ɗin su.
• Microchip ya yi imanin cewa dangin samfuran sa suna da tsaro lokacin da aka yi amfani da su ta hanyar da aka yi niyya, cikin ƙayyadaddun aiki, da kuma ƙarƙashin yanayi na yau da kullun.
  icrochip dabi'u kuma yana kare haƙƙin mallakar fasaha da ƙarfi. Ƙoƙarin keta fasalin kariyar lambar samfurin Microchip an haramta shi sosai kuma yana iya keta Dokar Haƙƙin mallaka na Millennium Digital.
• Babu Microchip ko duk wani masana'anta na semiconductor ba zai iya tabbatar da amincin lambar sa ba. Kariyar lambar ba yana nufin muna ba da garantin cewa samfurin “ba zai karye ba”. Kariyar lambar tana ci gaba da haɓakawa. Microchip ya himmatu don ci gaba da haɓaka fasalin kariyar lambar samfuranmu.

Sanarwa na Shari'a

Ana iya amfani da wannan ɗaba'ar da bayanin nan tare da samfuran Microchip kawai, gami da ƙira, gwadawa, da haɗa samfuran Microchip tare da aikace-aikacenku. Amfani da wannan bayanin ta kowace hanya ya saba wa waɗannan sharuɗɗan. Bayani game da aikace-aikacen na'ura an bayar da shi ne kawai don dacewa kuma ana iya maye gurbinsa
by updates. Alhakin ku ne don tabbatar da cewa aikace-aikacenku ya dace da ƙayyadaddun bayananku. Tuntuɓi ofishin tallace-tallace na Microchip na gida don ƙarin tallafi ko, sami ƙarin tallafi a www.microchip.com/en-us/support/design-help/client-support-services.

WANNAN BAYANI AN BAYAR DA MICROCHIP "KAMAR YADDA". MICROCHIP BA YA YI WAKILI KO GARANTIN KOWANE IRIN BAYANI KO BAYANI, RUBUTU KO BAKI, DOKA KO SAURAN BA, GAME DA BAYANIN GAME DA BAYANI AMMA BAI IYA IYAKA GA WANI GARGADI BA, DA KYAUTATA DON MUSAMMAN MANUFAR, KO GARANTIN DA KE DANGANTA DA SHARADINSA, INGANCI, KO AIKINSA.

BABU WANI FARKO MICROCHIP BA ZAI IYA HANNU GA DUK WATA BAYANI NA MUSAMMAN, HUKUNCI, MASU FARU, KO SAKAMAKON RASHI, LALATA, KUDI, KO KUDI NA KOWANE IRIN ABINDA YA DANGANE BAYANI KO SAMUN HANYAR AMFANINSA, ANA SHAWARAR DA YIWU KO LALACEWAR DA AKE SANYA. ZUWA CIKAKKIYAR DOKA, JAMA'AR DOKAR MICROCHIP A KAN DUK DA'AWA A KOWANE HANYA DAKE DANGANTA BAYANI KO AMFANINSA BA ZAI WUCE YAWAN KUDADE BA, IDAN WATA, CEWA KA BIYA GASKIYA GA GADON.

Amfani da na'urorin Microchip a cikin tallafin rayuwa da/ko aikace-aikacen aminci gabaɗaya yana cikin haɗarin mai siye, kuma mai siye ya yarda ya kare, ramuwa da riƙe Microchip mara lahani daga kowane lalacewa, iƙirari, dacewa, ko kashe kuɗi sakamakon irin wannan amfani. Ba a isar da lasisi, a fakaice ko akasin haka, ƙarƙashin kowane haƙƙin mallaka na Microchip sai dai in an faɗi haka.

Alamomin kasuwanci
Sunan Microchip da tambari, tambarin Microchip, Adaptec, AVR, tambarin AVR, AVR Freaks, BestTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus MediaLB, megaAVR, Microsemi, tambarin Microsemi, MAFI YAWAN tambari, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, tambarin PIC32, PolarFire, Prochip Designer, QTouch, SAM-BA, Sengenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetric , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, da XMEGA alamun kasuwanci ne masu rijista na Microchip Technology Incorporated a cikin Amurka da sauran ƙasashe.
AgileSwitch, APT, ClockWorks, Kamfanin Haɓaka Sarrafa Sarrafa, EtherSynch, Flashtec, Sarrafa Saurin Saurin, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Daidaitaccen Edge, ProASIC, ProASIC Plus, Tambarin ProASIC Plus, Shuru- Waya, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, da ZL alamun kasuwanci ne masu rijista na Microchip Technology Incorporated a cikin Amurka
A

djacent Key Suppression, AKS, Analog-for-the-Digital Age, Kowane Capacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPImicnatching Average, Matsakaicin Aiki. , DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, Tambarin Tambarin MPLAB, MPLIB, MPLINK, MultiTRAK, NetDetach, Ƙwararren Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, RTAX Blocker , RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Jimlar Jimiri, Amintaccen Lokaci, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, da ZENA alamun kasuwanci ne na Microchip Technology Incorporated a cikin Amurka da sauran ƙasashe.

SQTP alamar sabis ce ta Microchip Technology Incorporated a cikin Amurka
Alamar Adaptec, Mitar Buƙatu, Fasahar Adana Silicon, da Symmcom alamun kasuwanci ne masu rijista na Microchip Technology Inc. a wasu ƙasashe.
GestIC alamar kasuwanci ce mai rijista ta Microchip Technology Germany II GmbH & Co. KG, reshen Microchip Technology Inc., a wasu ƙasashe.
Duk sauran alamun kasuwanci da aka ambata a nan mallakin kamfanoninsu ne.
© 2022, Microchip Technology Incorporated da rassanta. Duka Hakkoki.
ISBN: 978-1-6683-1311-4

Tsarin Gudanar da inganci
Don bayani game da Tsarin Gudanar da Ingancin Microchip, da fatan za a ziyarci www.microchip.com/quality.

Kasuwanci da Sabis na Duniya

Ofishin Kamfanin
2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200
Fax: 480-792-7277 Goyon bayan sana'a:
www.microchip.com/support
Web Adireshi: www.microchip.com

New York, NY
Tel: 631-435-6000

Kanada - Toronto
Tel: 905-695-1980
Fax: 905-695-2078

Indiya - Bangalore
Lambar waya: 91-80-3090-4444
Indiya - New Delhi
Lambar waya: 91-11-4160-8631
Indiya - Pune
Lambar waya: 91-20-4121-0141

Japan - Osaka
Lambar waya: 81-6-6152-7160

Japan - Tokyo
Lambar waya: 81-3-6880-3770

Koriya - Daegu
Lambar waya: 82-53-744-4301

Koriya - Seoul
Lambar waya: 82-2-554-7200

Singapore
Lambar waya: 65-6334-8870

Malaysia - Kuala Lumpur
Lambar waya: 60-3-7651-7906

Malaysia - Penang
Lambar waya: 60-4-227-8870

Thailand - Bangkok
Lambar waya: 66-2-694-1351

Ostiriya - Wels
Lambar waya: 43-7242-2244-39
Saukewa: 43-7242-2244-393

Faransa - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79

Jamus - Garching
Lambar waya: 49-8931-9700

Jamus - Han
Lambar waya: 49-2129-3766400

Jamus - Heilbronn
Lambar waya: 49-7131-72400

Jamus - Karlsruhe
Lambar waya: 49-721-625370

Jamus - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44

Jamus - Rosenheim
Lambar waya: 49-8031-354-560

© 2022 Microchip Technology Inc. da rassansa

Takardu / Albarkatu

MICROCHIP H.264 Encoder [pdf] Jagorar mai amfani H.264 Encoder, H.264, Mai rikodin

Magana

• Manual mai amfani