PWAY manufactures professional audio/video connectivity solutions, including HDMI extenders, KVM switches, and wireless video transmission systems.
PWAY is a dedicated manufacturer of audio-video distribution and connectivity products, specializing in solutions that extend signals beyond the limitations of standard cabling. The brand offers a wide range of devices including HDMI extenders over Ethernet (Cat5e/6), wireless HDMI transmitter and receiver kits, HDMI splitters, and KVM (Keyboard, Video, Mouse) switches. These products are designed to support high-definition resolutions up to 4K@60Hz, making them suitable for home theaters, digital signage, conference rooms, and remote workstation setups.
Known for cost-effective and reliable hardware, PWAY integrates features such as Power over Cable (PoC), EDID management, and local loop-out capabilities into their devices. Their technology enables seamless transmission of audio and video over long distances, often utilizing standard network infrastructure to simplify installation for professional installers and DIY enthusiasts alike.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To reset the extender, disconnect all cables. Reconnect them in this order: HDMI to display, RJ45 to Receiver (RX), RJ45 to Transmitter (TX), HDMI source to TX, and finally the power supplies. Some units have a physical reset button on the device.
The 'no signal' error can be caused by a faulty HDMI port, incorrect HDMI cable version (ensure HDMI 1.4 or higher), or poor quality Ethernet cables. Ensure you are using Cat5e or Cat6 cables wired to the T568B standard.
Some PWAY models (IP extenders) support connection through a gigabit network switch, allowing for one-to-many configurations. However, point-to-point extenders requires a direct physical cable connection between the transmitter and receiver. Check your specific model's manual.
Wireless range varies by model, typically offering 50m (164ft) to 150m (500ft) transmission distances. Walls and physical obstructions will reduce the effective range.
Yes, most PWAY KVM switches support standard USB wireless keyboard and mouse dongles connected to the USB ports, in addition to wired peripherals.