PWAY PW-DT243 HDMI Extender over IP 150m/492ft User Manual

1. Introduction

The PWAY PW-DT243 HDMI Extender over IP is designed to transmit HDMI audio and video signals over long distances using a single network cable. This device supports high-definition resolutions up to 1920x1200@60Hz and is compatible with various lower resolutions including 1080P, 1080i, 720P, 720i, 480P, and 480i. It offers flexible deployment options, including point-to-point transmission, and a one-to-many configuration via an Ethernet switch, supporting up to 253 receivers. The extender also features a local loopout function, allowing monitoring of the transmitted image at the sending end. Automatic IP address acquisition simplifies setup, ensuring compatibility with HDCP output.

2. Safety Information

• Ensure all connections are secure before powering on the device.
• Use only the provided power adapters. Using unauthorized adapters may damage the device and void the warranty.
• Do not expose the device to water, moisture, or extreme temperatures.
• Avoid disassembling the device. Refer all servicing to qualified personnel.
• Place the device in a well-ventilated area to prevent overheating.
• Keep the device away from strong electromagnetic fields.

3. Package Contents

Please verify that all items are present in your package:

• 1 x PWAY PW-DT243 HDMI Transmitter (TX)
• 1 x PWAY PW-DT243 HDMI Receiver (RX)
• 2 x Power Adapters (DC 5V/1A)
• 1 x User Manual

4. Product Diagram

Familiarize yourself with the components and ports of the HDMI extender units.

Image 1: Front and rear view of the PWAY PW-DT243 HDMI Extender Transmitter and Receiver units, showing HDMI In/Out, RJ45, DC 5V, and Reset ports.

Image 2: Diagram illustrating a direct point-to-point connection between the HDMI source, Transmitter, Receiver, and HDMI display using a single network cable.

Image 3: Diagram showing a one-to-many setup where a single Transmitter connects to multiple Receivers via an Ethernet switch, distributing the HDMI signal to several displays.

5. Setup Instructions

Follow these steps to set up your PWAY PW-DT243 HDMI Extender:

1. Connect the HDMI Source: Use an HDMI cable to connect your HDMI source device (e.g., Blu-ray player, PC, game console) to the HDMI IN port on the Transmitter (TX) unit.
2. Connect the HDMI Display: Use an HDMI cable to connect your HDMI display device (e.g., TV, monitor, projector) to the HDMI OUT port on the Receiver (RX) unit.
3. Connect Transmitter and Receiver:
   • Point-to-Point: Connect the RJ45 port of the TX unit to the RJ45 port of the RX unit using a single Cat5e/6/7/8 network cable.
   • One-to-Many (via Ethernet Switch): Connect the RJ45 port of the TX unit to an Ethernet switch. Then, connect the RJ45 ports of multiple RX units to the same Ethernet switch. Ensure the switch supports IGMP snooping for optimal performance in a one-to-many setup.
4. Local Loopout (Optional): If you wish to monitor the source signal at the transmitting end, connect an HDMI display to the HDMI OUT (Loopout) port on the TX unit.
5. Power On: Connect the provided DC 5V/1A power adapters to the DC 5V ports on both the TX and RX units, then plug them into a power outlet. The devices will power on automatically.

Image 4: Illustration of the local loopout feature, allowing a display to be connected directly to the Transmitter unit to monitor the source signal.

6. Operating Instructions

Once the setup is complete, the PWAY PW-DT243 HDMI Extender operates automatically:

• Automatic Signal Detection: The extender units will automatically detect the HDMI input signal and establish a connection over the network cable.
• Automatic IP Acquisition: The Receiver (RX) unit automatically obtains an IP address, eliminating the need for manual configuration.
• Resolution Compatibility: The extender supports various resolutions up to 1920x1200@60Hz. Ensure your source and display devices are set to compatible resolutions for optimal performance.
• Status Indicators: Observe the LED indicators on both the TX and RX units. A steady light typically indicates a stable connection and signal transmission.

Image 5: Diagram showing the maximum transmission distances for different categories of network cables: Cat5 up to 100m, Cat5e up to 120m, and Cat6/7 up to 150m.

7. Maintenance

To ensure the longevity and optimal performance of your PWAY PW-DT243 HDMI Extender, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior of the units. Do not use liquid or aerosol cleaners.
• Ventilation: Ensure that the ventilation openings on the units are not blocked. Proper airflow prevents overheating.
• Cable Management: Keep HDMI and network cables organized and free from kinks or excessive bending to prevent signal degradation.
• Storage: If storing the device for an extended period, disconnect it from power and store it in a cool, dry place.

8. Troubleshooting

If you encounter issues with your HDMI extender, refer to the following troubleshooting steps:

• No Picture or Flickering Image:
  • Check all HDMI and network cable connections. Ensure they are securely plugged in.
  • Verify that both the TX and RX units are powered on and their LED indicators are active.
  • Ensure the HDMI source and display are set to a compatible resolution (up to 1920x1200@60Hz). Try a lower resolution if issues persist.
  • Test with a shorter or different network cable to rule out cable issues. Ensure the cable category (Cat5e/6/7/8) is appropriate for the distance.
  • Power cycle both the TX and RX units, as well as the HDMI source and display devices.
• Poor Image Quality or Signal Dropouts:
  • Ensure you are using a high-quality network cable (Cat6 or Cat7 recommended for longer distances).
  • Check that the network cable length does not exceed the maximum recommended distance for its category (Cat5: 100m, Cat5e: 120m, Cat6/7: 150m).
  • If using an Ethernet switch, ensure it is a reliable, managed switch that supports IGMP snooping. Some consumer-grade routers/switches may not handle the multicast traffic efficiently.
• No Audio:
  • Verify that the HDMI source is outputting audio.
  • Check audio settings on your display device.
• One-to-Many Setup Issues:
  • Ensure your Ethernet switch is properly configured for multicast traffic and IGMP snooping is enabled.
  • Isolate the issue by testing a single TX-RX connection directly.

9. Specifications

10. Warranty Information

PWAY products are designed for reliability and performance. This product typically comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official PWAY website for detailed warranty terms and conditions, including coverage period and claim procedures. Keep your proof of purchase for warranty service.

11. Support

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact PWAY customer support. You can typically find contact information on the official PWAY website or through the retailer where you purchased the product. When contacting support, please have your product model number (PW-DT243) and a description of your issue ready.