PWAY 4K HDMI Extender (Model PW-HT239-IR) User Manual

1. Introduction

The PWAY 4K HDMI Extender (Model PW-HT239-IR) allows you to transmit a 4K HDMI signal up to 60 meters (200 feet) over a single Cat5e/6/7 Ethernet cable. This device supports 4K@60Hz resolution with YUV444/RGB444 color formats, ensuring a high-quality video experience. It features an HDMI loop-out port on the transmitter for local monitoring and supports IR remote control extension, enabling control of the source device from the receiver location. This manual provides detailed instructions for installation, operation, and troubleshooting.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1x HDMI Extender Transmitter (TX)
• 1x HDMI Extender Receiver (RX)
• 1x Power Adapter (DC 12V)
• 1x IR Blaster Cable (IR OUT)
• 1x IR Receiver Cable (IR IN)
• 1x User Manual
• 1x Warranty Card

Image: Contents of the PWAY 4K HDMI Extender package, showing the transmitter, receiver, power adapter, IR cables, user manual, and warranty card.

3. Features

The PWAY 4K HDMI Extender offers the following key features:

• HDMI 2.0 Support: Compatible with HDMI 2.0 standards.
• 4K@60Hz Resolution: Supports resolutions up to 4K@60Hz with YUV444 and RGB444 color spaces for vibrant and detailed images.
• Extended Transmission: Extends 4K@60Hz signals up to 60 meters (200 feet) using a single Cat5e/Cat6/Cat7 Ethernet cable.
• HDMI Loop Out: Features an additional HDMI output on the transmitter unit for local display monitoring.
• IR Remote Control Extension: Allows control of the source device (e.g., Blu-ray player, TV box) from the remote display location using your existing IR remote.
• Durable Construction: Solid build quality for reliable performance.

Image: Visual comparison demonstrating the superior clarity and detail of 4K@60Hz YUV 4:4:4 resolution compared to lower resolutions.

4. Specifications

5. Safety Information

Please read and follow these safety guidelines to prevent damage to the device and ensure safe operation:

• Do not expose this unit to water, moisture, or excessive humidity.
• Do not place the unit near heat sources or in direct sunlight.
• Use only the provided power adapter. Using an incorrect power adapter may damage the device.
• Do not attempt to open or repair the unit. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the unit to prevent overheating.
• Keep the device away from children.

6. Setup Instructions

Follow these steps to set up your PWAY 4K HDMI Extender:

1. Prepare Cables: Ensure you have a high-quality HDMI 2.0 cable (preferably less than 3 meters/10 feet) for connecting the source to the transmitter and the receiver to the display. You will also need a Cat5e, Cat6, or Cat7 Ethernet cable (up to 60 meters) with T568B wiring for connecting the transmitter and receiver units.
2. Connect Source to Transmitter (TX): Connect your HDMI source device (e.g., PC, laptop, TV box) to the HDMI IN port of the Transmitter unit using an HDMI cable.
3. Connect Local Display (Optional): If you wish to monitor the signal locally, connect an HDMI display to the HDMI OUT (Loop Out) port of the Transmitter unit using an HDMI cable.
4. Connect Ethernet Cable: Connect one end of the Ethernet cable to the UTP port on the Transmitter unit and the other end to the UTP port on the Receiver unit.
5. Connect Receiver (RX) to Display: Connect your HDMI display device (e.g., TV, monitor, projector) to the HDMI OUT port of the Receiver unit using an HDMI cable.
6. Connect IR Cables:
   • Connect the IR Blaster cable (IR OUT) to the IR OUT port on the Transmitter unit. Position the IR emitter head near the IR sensor of your source device.
   • Connect the IR Receiver cable (IR IN) to the IR IN port on the Receiver unit. Position the IR receiver head in a location where it can receive signals from your remote control.
7. Power On: Connect the provided DC 12V power adapter to the DC 12V port on the Transmitter unit. The Receiver unit is powered via the Ethernet cable (PoC - Power over Cable) from the Transmitter, so it does not require a separate power adapter.
8. Verify Connection: Power on all connected devices (source, displays). The red light on both units indicates power, and the blue light indicates a stable signal connection.

Image: Connection diagram illustrating how to connect the HDMI source, transmitter, Ethernet cable, receiver, and display devices.

Image: Detailed view of the Transmitter (TX) and Receiver (RX) units, highlighting the HDMI IN/OUT, UTP, DC 12V, IR OUT, and IR IN ports, along with STA, EDID, and PWR indicator lights.

7. Operating Instructions

Once the setup is complete, the extender operates automatically. Ensure all devices are powered on and correctly connected.

• Power Indicator (Red LED): Illuminates when the unit receives power.
• Signal Indicator (Blue LED): Illuminates when a stable HDMI signal is detected and transmitted.
• HDMI Loop Out: The HDMI OUT port on the Transmitter (TX) unit provides a local display output, allowing you to view the source content simultaneously at the source location.
• IR Control: Use your source device's remote control at the receiver location. The IR receiver cable will pick up the signal, transmit it through the Ethernet cable to the transmitter, and the IR blaster cable will relay it to your source device.

8. IR Remote Control Functionality

The IR extension feature allows you to control your HDMI source device from the remote display location. This is particularly useful when the source device is in a different room or cabinet.

1. Ensure the IR Blaster cable is securely connected to the TX unit's IR OUT port and its emitter head is positioned directly over or very close to the IR sensor of your source device.
2. Ensure the IR Receiver cable is securely connected to the RX unit's IR IN port and its receiver head is placed in a clear line of sight to where you will be using your remote control.
3. Point your source device's remote control at the IR Receiver head at the display location to send commands to the source device.

Image: Illustration of the IR remote control extension feature, demonstrating how a remote control at the receiver end can control the source device connected to the transmitter.

9. Troubleshooting

If you encounter issues with your HDMI extender, please refer to the following troubleshooting steps:

• No Picture/Signal:
  • Ensure all HDMI and Ethernet cables are securely connected.
  • Verify that the power adapter is connected to the Transmitter unit and the red power LED is on.
  • Check if the blue signal LED is illuminated on both TX and RX units. If not, try a different Ethernet cable.
  • Confirm that the Ethernet cable uses the T568B wiring standard. Incorrect wiring can prevent signal transmission.
  • Test the HDMI source and display directly with an HDMI cable to ensure they are functioning correctly.
  • Try using a shorter, high-quality HDMI 2.0 cable between the source/TX and RX/display.
  • Power cycle all devices (source, extender units, display) by unplugging and re-plugging them.
• Poor Picture Quality/Flickering:
  • Ensure your Ethernet cable is Cat6 or Cat7 for optimal performance, especially over longer distances or with 4K@60Hz signals.
  • Check for electromagnetic interference (EMI) from other electronic devices. Try relocating the extender units or cables.
  • Verify that your HDMI cables are high-speed HDMI 2.0 compliant.
• IR Remote Control Not Working:
  • Ensure the IR Blaster head is correctly positioned over the source device's IR sensor.
  • Ensure the IR Receiver head is in a clear line of sight to your remote control.
  • Check that both IR cables are securely plugged into the correct ports (IR OUT on TX, IR IN on RX).
  • Confirm your remote control batteries are functional.
• HDMI-CEC Issues: Note that some HDMI-CEC functionalities (controlling multiple devices with one remote) may not be fully supported or may behave inconsistently through the extender. This is a common limitation with many HDMI extension solutions.

10. Maintenance

To ensure the longevity and optimal performance of your PWAY HDMI Extender, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior of the units. Do not use liquid cleaners or aerosols.
• Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Management: Avoid bending or kinking HDMI and Ethernet cables sharply, as this can damage the internal wires and affect signal quality.
• Ventilation: Ensure the units have adequate airflow around them to prevent heat buildup. The units are designed with ventilation slots for this purpose.

Image: The PWAY HDMI Extender unit featuring ventilation slots designed to ensure proper heat dissipation during operation.

11. Warranty and Support

PWAY products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included in your package or contact PWAY customer service through their official website or the retailer from whom you purchased the product. Please have your model number (PW-HT239-IR) and purchase details ready when contacting support.