MN MODEL specializes in hobby-grade remote control rock crawlers and scale off-road vehicles, offering detailed 1:12 and 1:16 replicas for enthusiasts.
MN MODEL is a well-known manufacturer in the radio-control hobby industry, recognized for producing affordable, high-scale accuracy RC rock crawlers and off-road trucks.
The brand focuses on 1:12 and 1:16 scale vehicles that replicate iconic automobile designs, such as the Land Rover Defender (MN99S) and Jeep Wrangler (MN-128). MN MODEL products are popular among hobbyists for their realistic appearance, durable chassis, and extensive modification potential, allowing users to upgrade motors, suspension, and electronics for improved performance on rugged terrain.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Press and hold the BIND button on the transmitter while turning it on. The indicator will double flash. Then, turn on the vehicle (receiver) to complete the binding process.
If the car does not track straight, adjust the Steering Trim (ST TRIM) knob on the remote controller. Rotate it in the opposite direction of the drift until the vehicle drives straight.
A rapidly flashing headlight typically indicates that the vehicle is in binding mode and searching for the transmitter signal. Ensure your remote is turned on and close to the vehicle.
Most models, such as the MN-128 and MN99S, use a 7.4V Li-Po battery (e.g., 1200mAh). Always remove the battery from the vehicle before charging for safety.