1. Introduction and Overview
This manual provides essential information for the safe assembly, operation, and maintenance of your EXTRA NG V2 EPO RC Plane. Please read it thoroughly before using the product.
The EXTRA NG V2 is a second-generation aerobatic aircraft, an upgraded simulation model of the EXTRA300. Constructed from high-strength EPO foam, it offers excellent durability, collision resistance, and smooth flight characteristics. It is designed for F3D 3D aerobatics and is suitable for both beginner and intermediate operators.
Key improvements in the V2 version include added winglets for enhanced low-speed lateral flight and overall stability, an upgraded motor for stronger power, high-precision digital 9G steering gears for delicate control, and ball rudder angles for improved accuracy.
2. Safety Information
- Age Recommendation: This product is suitable for individuals aged 14 years and above.
- Power System: The aircraft utilizes a low-voltage power supply system to minimize the risk of electric shock.
- Control Range: The remote control signal is stable, with an effective control distance of 20-50 meters in an environment free of obstacles. Always operate within this range.
- Battery Safety: When installing batteries, do not mix different brands, models, or old and new batteries to prevent leakage, short circuits, and damage to the remote controller.
- Flying Environment: Always operate the RC plane in open, unobstructed areas, away from people, animals, buildings, power lines, and other potential hazards.
- Pre-Flight Check: Before each flight, ensure all components are securely attached, batteries are charged, and control surfaces respond correctly.
3. Product Composition
The EXTRA NG V2 RC Plane is available in two main configurations: KIT and PNP.
- KIT (Empty Machine Set): Includes the aircraft body (EPO foam), rudder angle chuck, tie rods, and landing gear. Electronic components such as motor, ESC, propeller, battery, and servos are NOT included and must be purchased separately.
- PNP (Plug-N-Play Package): Includes the aircraft body, 3536 motor, propeller, 40A (4S version) ESC, and four 9-gram steering gears. A rechargeable battery pack and remote controller are NOT included and must be purchased separately.
- General Accessories (may vary by package): Manuals and certificates.
Please check the contents of your package upon unpacking. If any accessories are missing or damaged, contact your dealer or the after-sales service department.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MN MODEL |
| Model Number | 30E EXTRA NG |
| Type | Airplane |
| Wingspan | 1210mm |
| Length | 1100mm |
| Take-off Weight | Approximately 1.20Kg (1200g) |
| Body Material | EPO anti-drop foam, Plastic |
| Propeller (recommended) | 13*4 |
| Motor (recommended) | 3536 Brushless motor KV900 |
| ESC (recommended) | 40A Brushless electric adjustment 14.8V (4S version) with XT60 connector |
| Battery (recommended) | 1600-2200 mAh / 14.8V / 35C-4S Lithium battery |
| Servos (recommended) | Digital 9g * 4 pieces (2 digital 9g, 2 digital metal gear 9g) |
| Control Channels | Recommended 6 channels |
| Remote Control | Yes (Remote controller not included in KIT/PNP) |
| Power Source | Electric |
| Recommended Age | 14+ years |
| State of Assembly | Ready-to-Go (PNP), KIT (requires assembly) |
| Flight Time | Approximately 20-30 minutes (with large-capacity rechargeable batteries) |
| Remote Distance | 20-50 meters (in environment without obstacles) |
5. Setup
5.1 Remote Control Battery Installation
- Open the battery compartment cover located on the back of the remote controller.
- Insert three AA (No. 5) alkaline batteries, ensuring correct polarity as marked by the "+" and "-" symbols inside the compartment. (Batteries are not included and must be purchased separately).
- Close the battery compartment cover tightly, ensuring the buckle is fully secured to prevent batteries from falling out during use.
- Important: To avoid battery leakage, short circuits, and damage to the remote controller, do not mix different brands, models, or old and new batteries.
5.2 Aircraft Body Power Supply (for PNP models)
- Open the battery compartment of the aircraft body.
- Load the rechargeable battery pack (e.g., 1600-2200 mAh / 14.8V / 35C-4S Lithium battery) in the correct polarity direction.
- Close the battery compartment cover.
- Insert the output end of the charger into the charging interface of the aircraft body.
- Connect the input end of the charger to a household 220V AC power supply. The charger's indicator light will illuminate, indicating that charging has begun.
- Charging typically takes approximately 2-3 hours. The indicator light will change from red to green once charging is complete.
- Promptly disconnect the power supply and unplug the charger after charging to prevent overcharge damage to the battery.
- The rechargeable battery pack can be recycled. If the aircraft's speed becomes noticeably slow or it cannot start normally, it indicates insufficient power and the battery needs to be recharged.
5.3 Remote Control Pairing
- Turn on the power switches of both the remote controller and the aircraft. The remote controller's indicator light will illuminate, and the aircraft may emit a startup prompt tone.
- Wait for 3-5 seconds. The remote controller and the aircraft should automatically complete the pairing process, allowing the aircraft to be controlled.
- If pairing fails, turn off the power of both devices, then turn them on again and retry. Also, check if the battery power in both devices is sufficient.
6. Operating Instructions
The remote controller features a humanized design with a clear key layout for simple operation. The specific key functions are as follows:
6.1 Direction Control Keys
- Forward Key: When pressed, the aircraft will move forward at a constant speed. It will stop when released.
- Back Key: When pressed, the aircraft will travel backward at a constant speed. It will stop when released.
- Turn Left Key: When pressed, the aircraft turns left. This can be combined with the Forward key for left-front driving. It will go straight after being released.
- Turn Right Key: When pressed, the aircraft turns to the right. This can be combined with the Forward key for right-front driving. It will go straight after being released.
- Stop Button (on some models): When pressed, the aircraft immediately stops all actions and enters a standby state.
6.2 Function Keys (if equipped on your model)
- Acceleration Key: When pressed, the aircraft switches to a high-speed driving mode. Pressing it again restores the normal speed.
- Trick Key: When pressed, the aircraft performs preset stunt actions (e.g., rotation, drift, overturning). It automatically returns to the normal driving state after the action is completed.
- Lighting/Sound Effect Key: When pressed, the lighting and sound effects of the aircraft can be turned on or off, providing a richer play experience.
7. Maintenance
- Cleaning: Clean the aircraft body with a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
- Storage: Store the aircraft and its components in a cool, dry place, away from direct sunlight and extreme temperatures.
- Component Inspection: Regularly check all moving parts, including servos, control rods, and the propeller, for any signs of damage, wear, or looseness. Ensure all connections are secure.
- Battery Care: Properly store and charge batteries according to their specifications. Do not leave batteries fully discharged or fully charged for extended periods.
- Disposal: Dispose of old or damaged batteries and electronic components responsibly, following local environmental regulations.
8. Troubleshooting
- Aircraft not responding to remote control:
- Ensure both the remote control and aircraft are powered on.
- Verify that batteries in both devices are sufficiently charged.
- Attempt to re-pair the remote control and aircraft (refer to Section 5.3).
- Check that the remote control signal is not obstructed or out of range (max 20-50m).
- Short flight time:
- Ensure the rechargeable battery is fully charged (2-3 hours).
- The battery may be aging and require replacement.
- Check for excessive drag or damage to the propeller or airframe.
- Aircraft not flying straight or unstable:
- Check for any visible damage to the wings, tail, or control surfaces.
- Ensure all control rods and servos are properly connected and functioning without obstruction.
- Verify that the aircraft is balanced correctly according to its design.
9. User Tips
- Understand Your Package: Remember that the "KIT" version requires you to supply and install all electronic components (motor, ESC, propeller, battery, servos) yourself. The "PNP" version comes with these components pre-installed, but you will still need a battery and remote controller.
- Pre-Flight Check is Crucial: Always perform a thorough inspection of your aircraft before each flight. This includes checking all connections, control surface movements, and battery levels.
- Optimal Flying Environment: For the best experience and to ensure safety, fly your EXTRA NG V2 in wide-open spaces, free from obstacles, people, and strong winds.
10. Warranty and Support
For any issues regarding missing or damaged accessories upon unpacking, or for technical support, please contact the dealer or the manufacturer's after-sales service department directly.
A detailed user manual in PDF format is also available for further reference: View User Manual (PDF)
11. Compliance
This product complies with relevant safety standards for remote-controlled aircraft. It is intended for use by individuals aged 14 years and older.